> Ciao a tutti :-) > > ho messo in uno slot pci una scheda ethernet Intel > > lspci -v > > 0000:00:0b.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro > 100] (rev 04) > Subsystem: Intel Corporation EtherExpress PRO/100+ > Flags: bus master, medium devsel, latency 64, IRQ 177 > Memory at dd9ff000 (32-bit, prefetchable) [size=4K] > I/O ports at ee00 [size=32] > Memory at dfe00000 (32-bit, non-prefetchable) [size=1M] > Expansion ROM at dfd00000 [disabled] [size=1M] > Capabilities: [dc] Power Management version 1 > > dmesg: > e100: eth0: e100_probe: addr 0xdd9ff000, irq 177, MAC addr > 00:A0:C9:A2:4F:55 eth0: VIA Rhine II at 0x1e400, 00:0e:a6:c7:97:16, IRQ > 201. > eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Non so come, ma l'interfaccia che in dmesg viene riconosciuta come eth0 equivale a eth3.
se la configuro con ifconfig eth3 [parametri] pinga qualcuno mi spiega come mai? Grazie! Pol -- Per REVOCARE l'iscrizione alla lista, inviare un email a [EMAIL PROTECTED] con oggetto "unsubscribe". Per problemi inviare un email in INGLESE a [EMAIL PROTECTED] To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]