Un Domenicale saluto a tutti :-) Ho finito ora di configurare > Wireless Modem HUAWEI ETS2551 il quale mi permettera' di navigare su internet ed aggiornare la mia Lenny ad un costo _ragionevole_ rispetto al "gprs/edge" del mio telefonino (via bluetooth) che ho usato fin'ora :-) Ah! uso un portatile Toshiba tecra A4 che ha compiuto i due anni il mese scorso :) Il problema che vi sottopongo riguarda i continui blocchi di sistema da quando ho installato e, naturalmente quando lo uso, il kernel 2.6.22 sulla mia Lenny. Io ho gia' il mal di testa a forza di guardare log. Vi posto l'ultimo "dmesg" dove il boot ha superato il login, la musica di "benvenuto" e poi... "tutti fermi" :-( Se volete vi posto anche altri dove ha superato il login e ha fatto una sessione intera ma mi sembra gia... lunga questa lettera :-) Ah! come potrete vedere, ci sono dei parametri al boot. "irqpool" e' necessario per "ordinare" l'irq11 un po' affollato :-) il "pci=assign-busses" l'ho messo perche' nel "dmesg" c'era questo > PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06) > (try 'pci=assign-busses') Questo mi appare anche quando uso il 2.6.21 e mai mi ha dato problemi. Ora, perche' l'ho visto ho messo la direttiva anche al boot del kernel 2.6.21. A dirvi il vero, non ho visto differenze salvo che e' scomparsa la riga qui sopra. Boh! :-) Beh! eccovi l'ultimo "dmesg" e grazie per l'aiuto che mi darete per capire cosa ha il mio nuovo kernel :-)
> Linux version 2.6.22-2-686 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc > version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug > 31 00:24:01 UTC 2007 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable) > BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data) > BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 511MB LOWMEM available. > Entering add_active_range(0, 0, 131039) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 131039 > HighMem 131039 -> 131039 > early_node_map[1] active PFN ranges > 0: 0 -> 131039 > On node 0 totalpages: 131039 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 991 pages used for memmap > Normal zone: 125952 pages, LIFO batch:31 > HighMem zone: 0 pages used for memmap > DMI 2.3 present. > ACPI: RSDP 000E5010, 0014 (r0 TOSINV) > ACPI: RSDT 1FFF89F7, 0034 (r1 INSYDE RSDT_000 100 ABCD 10200) > ACPI: FACP 1FFFFB30, 0074 (r1 TOSINV FACP_000 100 0000 10200) > ACPI: DSDT 1FFF9040, 6AE5 (r1 TOSINV SONOMA 1004 INTL 2002036) > ACPI: FACS 1FFFFFC0, 0040 > ACPI: MCFG 1FFFFBC0, 003C (r1 INSYDE MCFG_000 30303030 0000 30303030) > ACPI: SSDT 1FFF8BE5, 0279 (r1 PmRef Cpu0Ist 3000 INTL 20030522) > ACPI: SSDT 1FFF8A2B, 01BA (r1 PmRef Cpu0Cst 3001 INTL 20030522) > ACPI: PM-Timer IO Port: 0x1008 > Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) > Built 1 zonelists. Total pages: 130016 > Kernel command line: root=/dev/sda3 ro irqpoll pci=assign-busses > Misrouted IRQ fixup and polling support enabled > This may significantly impact system performance > Local APIC disabled by BIOS -- you can enable it with "lapic" > mapped APIC to ffffd000 (0140c000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 8192 bytes) > Detected 1862.050 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 510728k/524156k available (1688k kernel code, 12812k reserved, > 653k data, 244k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) > lowmem : 0xc0000000 - 0xdffdf000 ( 511 MB) > .init : 0xc034f000 - 0xc038c000 ( 244 kB) > .data : 0xc02a62bf - 0xc03497e4 ( 653 kB) > .text : 0xc0100000 - 0xc02a62bf (1688 kB) > Checking if this processor honours the WP bit even in supervisor > mode... Ok. > Calibrating delay using timer specific routine.. 3736.96 BogoMIPS > (lpj=7473932) > Security Framework v1.0.0 initialized > SELinux: Disabled at boot. > Capability LSM initialized > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 > 00000180 00000000 00000000 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: After all inits, caps: afe9f9ff 00000000 00000000 00002040 > 00000180 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 11k freed > ACPI: Core revision 20070126 > ACPI: setting ELCR to 0200 (from 0c20) > CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 > SMP motherboard not detected. > Local APIC not detected. Using dummy APIC emulation. > Brought up 1 CPUs > Booting paravirtualized kernel on bare hardware > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO > PCI quirk: region 1300-133f claimed by ICH6 GPIO > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) > ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) > ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11) > ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11 > ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11 > ACPI: Power Resource [PUT2] (on) > ACPI: Power Resource [PFA1] (off) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > 00:0b: SMCf010 not responding at SIR 0x2f8, FIR 0x110; > auto-configuring > pnp: Device 00:0b disabled. > pnp: Device 00:0b activated. > 00:0b: responds at SIR 0x2f8, FIR 0x110 > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post > a report > PCI: Cannot allocate resource region 0 of device 0000:04:06.0 > NET: Registered protocol family 8 > NET: Registered protocol family 20 > ACPI: RTC can wake from S4 > pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved > pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved > pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved > pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved > pnp: 00:05: iomem range 0xe0000000-0xefffffff has been reserved > pnp: 00:05: iomem range 0xf0008000-0xf000bfff has been reserved > pnp: 00:05: iomem range 0xfed14000-0xfed17fff has been reserved > pnp: 00:05: iomem range 0xfed18000-0xfed18fff has been reserved > Time: tsc clocksource has been installed. > PCI: Bridge: 0000:00:01.0 > IO window: c000-dfff > MEM window: c0000000-cfffffff > PREFETCH window: 90000000-9fffffff > PCI: Bridge: 0000:00:1c.0 > IO window: a000-bfff > MEM window: bc000000-bfffffff > PREFETCH window: 8c000000-8fffffff > PCI: Bridge: 0000:00:1c.1 > IO window: 8000-9fff > MEM window: b8000000-bbffffff > PREFETCH window: 88000000-8bffffff > PCI: Bus 5, cardbus bridge: 0000:04:06.0 > IO window: 00006000-000060ff > IO window: 00006400-000064ff > PREFETCH window: 80000000-83ffffff > MEM window: b4000000-b7ffffff > PCI: Bridge: 0000:00:1e.0 > IO window: 6000-7fff > MEM window: b0000000-b7ffffff > PREFETCH window: 80000000-87ffffff > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 > PCI: setting IRQ 10 as level-triggered > ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNKC] -> GSI 11 (level, > low) -> IRQ 11 > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 196608 bytes) > TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > checking if image is initramfs... it is > Switched to high resolution mode on CPU 0 > Freeing initrd memory: 5328k freed > audit: initializing netlink socket (disabled) > audit(1193333715.676:1): initialized > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > Boot video device is 0000:01:00.0 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 > PCI: setting IRQ 5 as level-triggered > ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, > low) -> IRQ 5 > ACPI: PCI interrupt for device 0000:00:1e.3 disabled > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > i8042.c: Detected active multiplexing controller, rev 1.1. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX0 port at 0x60,0x64 irq 12 > serio: i8042 AUX1 port at 0x60,0x64 irq 12 > serio: i8042 AUX2 port at 0x60,0x64 irq 12 > serio: i8042 AUX3 port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > Freeing unused kernel memory: 244k freed > input: AT Translated Set 2 keyboard as /class/input/input0 > ACPI: Transitioning device [FAN1] to D3 > ACPI: Transitioning device [FAN1] to D3 > ACPI: Fan [FAN1] (off) > ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device > is not present [20070126] > Marking TSC unstable due to: possible TSC halt in C2. > Time: acpi_pm clocksource has been installed. > ACPI: Thermal Zone [TZCR] (62 C) > ACPI: Thermal Zone [TZVR] (52 C) > ACPI: Thermal Zone [TZVL] (53 C) > ACPI: Thermal Zone [TZCL] (46 C) > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > Clocksource tsc unstable (delta = -170637400 ns) > ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb 1-1: new low speed USB device using uhci_hcd and address 2 > PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) > ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 8 ports detected > ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6 > PCI: setting IRQ 6 as level-triggered > ACPI: PCI Interrupt 0000:04:06.2[C] -> Link [LNKG] -> GSI 6 (level, > low) -> IRQ 6 > firewire_ohci: Added fw-ohci device 0000:04:06.2, OHCI version 1.10 > SCSI subsystem initialized > libata version 2.21 loaded. > ata_piix 0000:00:1f.2: version 2.11 > ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] > ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > scsi0 : ata_piix > scsi1 : ata_piix > ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 > irq 14 > ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 > irq 15 > usb 1-1: device not accepting address 2, error -71 > ata1.00: ATA-6: FUJITSU MHV2080AH, 00400097, max UDMA/100 > ata1.00: 156301488 sectors, multi 16: LBA > ata1.00: applying bridge limits > ata1.00: configured for UDMA/100 > firewire_core: created new fw device fw0 (0 config rom retries) > ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.40, max UDMA/33 > ata2.00: configured for UDMA/33 > scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0040 PQ: 0 > ANSI: 5 > scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-831S 1.40 PQ: 0 > ANSI: 5 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 < sda5<6>usb 1-1: new low speed USB device using > uhci_hcd and address 4 > sda6 sda7 sda8 sda9 > sda3 > sd 0:0:0:0: [sda] Attached SCSI disk > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sr 1:0:0:0: Attached scsi generic sg1 type 5 > usb 1-1: configuration #1 chosen from 1 choice > usb 2-2: new full speed USB device using uhci_hcd and address 2 > usb 2-2: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > input: Logitech Optical USB Mouse as /class/input/input1 > input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on > usb-0000:00:1d.0-1 > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > Attempting manual resume > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > Linux agpgart interface v0.102 (c) Dave Jones > ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > sky2 0000:02:00.0: v1.14 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1 > sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx > mode. > sky2 eth0: addr 00:a0:d1:22:1d:56 > intel_rng: FWH not detected > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) > iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > Yenta: CardBus bridge found at 0000:04:06.0 [1179:ff10] > Yenta: Enabling burst memory read transactions > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:04:06.0, mfunc 0x01aa1b22, devctl 0x66 > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Yenta: ISA IRQ mask 0x0098, PCI irq 11 > Socket status: 30000006 > pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff > cs: IO port probe 0x6000-0x7fff: clean. > pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff > pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff > ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, > low) -> IRQ 5 > PCI: Setting latency timer of device 0000:00:1e.3 to 64 > Bluetooth: HCI USB driver ver 2.9 > Real Time Clock Driver v1.12ac > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci: SDHCI controller found at 0000:04:06.4 [104c:8034] (rev 0) > ACPI: PCI Interrupt 0000:04:06.4[A] -> Link [LNKC] -> GSI 11 (level, > low) -> IRQ 11 > mmc0: SDHCI at 0xb000a000 irq 11 DMA > mmc1: SDHCI at 0xb000a100 irq 11 DMA > mmc2: SDHCI at 0xb000a200 irq 11 DMA > ieee80211_crypt: registered algorithm 'NULL' > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation > <[EMAIL PROTECTED]> > usbcore: registered new interface driver hci_usb > ACPI: PCI Interrupt 0000:04:06.3[D] -> Link [LNKE] -> GSI 5 (level, > low) -> IRQ 5 > ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, > low) -> IRQ 10 > PCI: Setting latency timer of device 0000:00:1e.2 to 64 > ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmq > ipw2200: Copyright(c) 2003-2006 Intel Corporation > Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: > 0xa04713/0x0 > irda_init() > NET: Registered protocol family 23 > input: SynPS/2 Synaptics TouchPad as /class/input/input2 > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > cs: IO port probe 0x100-0x3af: excluding 0x110-0x117 0x300-0x307 > 0x310-0x31f > cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 > cs: IO port probe 0x820-0x8ff: clean. > cs: IO port probe 0xc00-0xcf7: clean. > cs: IO port probe 0xa00-0xaff: clean. > intel8x0_measure_ac97_clock: measured 55475 usecs > intel8x0: clocking to 48000 > ACPI: PCI Interrupt 0000:04:04.0[A] -> Link [LNKA] -> GSI 11 (level, > low) -> IRQ 11 > ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection > ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a > channels) > udev: renamed network interface eth1 to eth2 > Adding 867468k swap on /dev/sda8. Priority:-1 extents:1 > across:867468k > EXT3 FS on sda3, internal journal > loop: module loaded > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: > [EMAIL PROTECTED] > fuse init (API version 7.8) > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda9, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > NTFS driver 2.1.28 [Flags: R/W MODULE]. > NTFS volume version 3.1. > kjournald starting. Commit interval 5 seconds > EXT3-fs warning: maximal mount count reached, running e2fsck is > recommended > EXT3 FS on sda5, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3-fs warning: maximal mount count reached, running e2fsck is > recommended > EXT3 FS on sda7, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. > pcmcia: This interface will soon be removed from the kernel; please > expect breakage unless you upgrade to new tools. > pcmcia: see > http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for > details. Ciao Genki ):o)) -- Per REVOCARE l'iscrizione alla lista, inviare un email a [EMAIL PROTECTED] con oggetto "unsubscribe". Per problemi inviare un email in INGLESE a [EMAIL PROTECTED] To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
