-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello
I am running k3b 0.11.9 under woody. I have a CD writer/DVD reader which works fine in TAO mode but fails when using SAO (dao) mode. I am trying to burn a VCD from a videocd.bin and videocd.cue. I get the following error when debuging the output: =========================================== System - ----------------------- K3b Version: 0.11.9 KDE Version: 3.2.0 QT Version: 3.2.1 cdrecord - ----------------------- scsidev: '0,0,6' scsibus: 0 target: 0 lun: 6 Linux sg driver version: 3.1.25 Cdrecord 2.01a16 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'RW/DVD GCC-4241N' Revision : 'A101' Device seems to be: Generic mmc2 DVD-ROM. Current: 0x0009 Profile: 0x0010 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1644048 = 1605 KB FIFO size : 4194304 = 4096 KB Track 01: data 1 MB Track 02: data 101 MB Total size: 102 MB (10:08.20) = 45615 sectors Lout start: 102 MB (10:10/15) = 45615 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11768 (97:25/07) ATIP start of lead out: 359775 (79:59/00) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 64 Manufacturer: MPO Blocks total: 359775 Blocks current: 359775 Blocks remaining: 314160 Starting to write CD/DVD at speed 10 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord.mmap: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A C0 FF FF FF 6A 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1605 K BSize: 1605 K Starting new track at sector: 0 Track 01: 0 of 1 MB written. /usr/bin/cdrecord.mmap: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A C0 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 200s /usr/bin/cdrecord.mmap: A write error occured. /usr/bin/cdrecord.mmap: Please properly read the error message above. write track data: error after 0 bytes Writing time: 16.120s Average write speed 121.4x. Fixating... Fixating time: 0.004s /usr/bin/cdrecord.mmap: fifo had 64 puts and 1 gets. /usr/bin/cdrecord.mmap: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord comand: - ----------------------- /usr/bin/cdrecord.mmap -v gracetime=2 dev=0,0,6 speed=24 -dao driveropts=burnfree cuefile=/home/vicente/video/videocd.cue -eject ===================================================== I have tested the following command at the command line and I get the same errors: cdrecord dev=0,0 -dao cuefile=videocd.cue -speed=4 I have also tried to burn the CD using cdrdao at the command line and I get an almost identical error which I have looked for googling. I have found no useful clues of what is going on. May be somebody in the list can help....? Thanks in advance. ======================================================== cdrdao write --driver generic-mmc --device 0,0,0 -v9 videocd.cue Cdrdao version 1.1.9 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. SCSI: max DMA: 64512 Using libscg version 'schily-0.8' Using libscg transport code version 'schily-scsi-linux-sg.c-1.83' 0,0,0: HL-DT-ST RW/DVD GCC-4241N Rev: A101 Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000) Burning entire 79 mins disc. Starting write at speed 10... Pausing 10 seconds - hit CTRL-C to abort. Process can be aborted with QUIT signal (usually CTRL-\). Lead-in start: 97:25:07 length: 11618 Lead-out length: 6750 Using pthread POSIX real time scheduling. Swap: 1 Buffer filled Using pthread POSIX real time scheduling. Memory locked Waiting for reader process Awaken, will start writing Turning BURN-Proof on Multi session mode: 0 Data block type: 0 Session format: 20 Toc type: 0x20 Drive accepted write parameter mode page variant 0. Executing power calibration... Power calibration successful. Track is Blank, Next Writable Address is valid NWA: -150 Cue Sheet (variant 0): CTL/ TNO INDEX DATA SCMS MIN SEC FRAME ADR FORM 41 00 00 24 00 00 00 00 61 01 00 20 00 00 00 00 61 01 01 20 00 00 02 00 61 02 00 20 00 00 06 00 61 02 01 20 00 00 08 00 41 aa 01 24 00 10 10 15 Drive accepted cue sheet variant 0. cdrdao: Input/output error. : scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 180s ERROR: Write data failed. ERROR: Writing failed ======================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBHUXBSItUpHl6kJERAoZ9AKDPpODGaiBJxRp2OM9Cs37atsZC8ACgoz8l RjklPKCAu3WVR/wtE7Mbdbs= =0pd1 -----END PGP SIGNATURE-----