On Friday 31 August 2007 23:51:02 robert caterina wrote: > hy Nick, hy José, > Thanks for having taken the time to analyze my problem. I have > done what were suggested by José (i installed wireshark: very nice GUI > in fact!) and ran it, then i connected to my bank with konqueror. I > received a lot of informations in which i saw that there was a > difference in the secure protocol used during the shaking hand or > acquirement from both parts. From my side, it was the SSLv2 one but > from the bank's side it was TLS!? (it is why an error message raised: > Failed...) Thus i went in Kcontrolcenter (or in konqueror-configuration > it's the same) to modify the configuration in the crypto module: i > unchecked SSLv2 and also SSLv3 and let only the TLS checked. I made a > retry to connect to my bank and voilà IT WORKS fine! > Note that i have first tried unchecking SSLv2 and keeping SSLv3 checked > but it didn't work! Strange behaviour, isn't it? > Nick, i have tried too to connect to https://gmail.google.com/ but i > get a white window (hence no error message). Should i post in the list > the output of wirewhark? > Cheers > robert
Interesting thread, I had issues with my bank and Konq also. I did notice that Iceweasel, which works, enables ssl v3.0 & tls only, while Konq enabled those plus ssl v2.0. Disabled ssl v2.0 and Konq works. -- Greg Madden -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]