Your message dated Sun, 07 Feb 2016 22:43:10 +0000 with message-id <E1aSY2w-0006L9-4e@deadeye> and subject line Closing bugs assigned to linux-2.6 package has caused the Debian Bug report #702960, regarding linux-image-2.6.32-5-amd64: Kernel issues a stream of kobject_add_internal failed for threshold_bank5 with -EEXIST during boot to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 702960: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702960 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-2.6 Version: 2.6.32-48squeeze1 Severity: important -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=26d2463e-fb90-480f-9054-d218e8dfa17e ro console=tty0 console=ttyS0,19200n8 ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 253.685837] md: bind<sdb6> [ 253.702321] md: bind<sda6> [ 253.719652] raid1: raid set md2 active with 2 out of 2 mirrors [ 253.754706] md2: detected capacity change from 0 to 100001799168 [ 253.791439] md2: unknown partition table [ 253.995643] md: md3 stopped. [ 254.014014] md: bind<sdb7> [ 254.030487] md: bind<sda7> [ 254.047847] raid1: raid set md3 active with 2 out of 2 mirrors [ 254.082866] md3: detected capacity change from 0 to 699994783744 [ 254.119616] md3: unknown partition table [ 254.324306] PM: Starting manual resume from disk [ 254.355355] PM: Resume from partition 9:2 [ 254.355357] PM: Checking hibernation image. [ 254.356232] PM: Error -22 checking image file [ 254.356234] PM: Resume from disk failed. [ 254.388361] kjournald starting. Commit interval 5 seconds [ 254.388369] EXT3-fs: mounted filesystem with ordered data mode. [ 255.207212] udev[777]: starting version 164 [ 255.327802] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 255.378085] ACPI: Power Button [PWRB] [ 255.383425] processor LNXCPU:00: registered as cooling_device0 [ 255.386409] processor LNXCPU:01: registered as cooling_device1 [ 255.389383] processor LNXCPU:02: registered as cooling_device2 [ 255.392322] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 255.392329] processor LNXCPU:03: registered as cooling_device3 [ 255.394953] processor LNXCPU:04: registered as cooling_device4 [ 255.398140] processor LNXCPU:05: registered as cooling_device5 [ 255.401039] processor LNXCPU:06: registered as cooling_device6 [ 255.403635] processor LNXCPU:07: registered as cooling_device7 [ 255.406547] processor LNXCPU:08: registered as cooling_device8 [ 255.409775] processor LNXCPU:09: registered as cooling_device9 [ 255.412676] processor LNXCPU:0a: registered as cooling_device10 [ 255.415251] processor LNXCPU:0b: registered as cooling_device11 [ 255.418518] processor LNXCPU:0c: registered as cooling_device12 [ 255.421475] processor LNXCPU:0d: registered as cooling_device13 [ 255.424447] processor LNXCPU:0e: registered as cooling_device14 [ 255.427039] processor LNXCPU:0f: registered as cooling_device15 [ 256.051490] processor LNXCPU:10: registered as cooling_device16 [ 256.087206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 256.131711] ACPI: Power Button [PWRF] [ 256.158424] processor LNXCPU:11: registered as cooling_device17 [ 256.198637] processor LNXCPU:12: registered as cooling_device18 [ 256.238879] processor LNXCPU:13: registered as cooling_device19 [ 256.279166] processor LNXCPU:14: registered as cooling_device20 [ 256.319530] processor LNXCPU:15: registered as cooling_device21 [ 256.359869] processor LNXCPU:16: registered as cooling_device22 [ 256.400190] processor LNXCPU:17: registered as cooling_device23 [ 256.441295] processor LNXCPU:18: registered as cooling_device24 [ 256.481650] processor LNXCPU:19: registered as cooling_device25 [ 256.522028] processor LNXCPU:1a: registered as cooling_device26 [ 256.562457] usb-storage: device scan complete [ 256.562492] processor LNXCPU:1b: registered as cooling_device27 [ 256.602864] processor LNXCPU:1c: registered as cooling_device28 [ 256.643145] scsi 6:0:0:0: CD-ROM TEAC DV-28S-W 1.2A PQ: 0 ANSI: 0 [ 256.643257] processor LNXCPU:1d: registered as cooling_device29 [ 256.646311] processor LNXCPU:1e: registered as cooling_device30 [ 256.649299] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 256.649403] processor LNXCPU:1f: registered as cooling_device31 [ 256.707167] Error: Driver 'pcspkr' is already registered, aborting... [ 257.224967] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 257.262084] Uniform CD-ROM driver Revision: 3.20 [ 257.289951] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 257.318151] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 257.350161] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 257.382130] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 257.788479] Adding 97657988k swap on /dev/md2. Priority:-1 extents:1 across:97657988k [ 258.032485] EXT3 FS on md1, internal journal [ 258.108908] __ratelimit: 68 callbacks suppressed [ 258.138470] mdadm: sending ioctl 1261 to a partition! [ 258.144197] loop: module loaded [ 258.198479] mdadm: sending ioctl 1261 to a partition! [ 258.229093] mdadm: sending ioctl 1261 to a partition! [ 258.267640] mdadm: sending ioctl 1261 to a partition! [ 258.313280] mdadm: sending ioctl 1261 to a partition! [ 258.343624] mdadm: sending ioctl 1261 to a partition! [ 258.374215] mdadm: sending ioctl 1261 to a partition! [ 258.404566] mdadm: sending ioctl 1261 to a partition! [ 258.441988] mdadm: sending ioctl 1261 to a partition! [ 258.472324] mdadm: sending ioctl 1261 to a partition! [ 258.943215] kjournald starting. Commit interval 5 seconds [ 258.976404] EXT3 FS on md3, internal journal [ 259.002202] EXT3-fs: mounted filesystem with ordered data mode. [ 259.522655] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 259.525440] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 259.598751] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 261.488674] RPC: Registered udp transport module. [ 261.519699] RPC: Registered tcp transport module. [ 261.556246] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 261.634573] Slow work thread pool: Starting up [ 261.663307] Slow work thread pool: Ready [ 261.693955] FS-Cache: Loaded [ 261.734780] FS-Cache: Netfs 'nfs' registered for caching [ 261.768446] svc: failed to register lockdv1 RPC service (errno 97). [ 261.806215] Invalid hostname "pid1723@Kuster:/net" in NFS lock request [ 262.847237] svc: failed to register lockdv1 RPC service (errno 97). [ 262.884955] Invalid hostname "pid1723@Kuster:/net" in NFS lock request [ 270.580034] eth0: no IPv6 routers present [ 518.162296] svc: failed to register lockdv1 RPC service (errno 97). [ 698.439700] i2c /dev entries driver ** Model information sys_vendor: Supermicro product_name: H8DGU product_version: 1234567890 chassis_vendor: Supermicro chassis_version: 1234567890 bios_vendor: American Megatrends Inc. bios_version: 3.0 board_vendor: Supermicro board_name: H8DGU board_version: 1234567890 ** Loaded modules: Module Size Used by nfs 241498 1 lockd 57651 1 nfs fscache 29882 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33524 1 nfs sunrpc 161756 10 nfs,lockd,nfs_acl,auth_rpcgss autofs 10850 2 loop 11799 0 sg 24085 0 sr_mod 12602 0 cdrom 29351 1 sr_mod snd_pcm 60487 0 snd_timer 15598 1 snd_pcm snd 46542 2 snd_pcm,snd_timer i2c_piix4 8328 0 i2c_core 15835 1 i2c_piix4 soundcore 4598 1 snd joydev 8459 0 snd_page_alloc 6265 1 snd_pcm evdev 7352 4 pcspkr 1699 0 processor 29951 32 button 4650 0 ext3 106854 2 jbd 37349 1 ext3 mbcache 5050 1 ext3 raid1 18431 3 md_mod 73936 4 raid1 sd_mod 29953 8 crc_t10dif 1276 1 sd_mod ata_generic 3239 0 usb_storage 40233 0 usbhid 33324 0 hid 63273 1 usbhid pata_atiixp 3505 0 ahci 32950 6 libata 133824 3 ata_generic,pata_atiixp,ahci igb 91336 0 thermal 11674 0 dca 3761 1 igb ohci_hcd 19375 0 ehci_hcd 32145 0 usbcore 123399 5 usb_storage,usbhid,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore scsi_mod 126901 5 sg,sr_mod,sd_mod,usb_storage,libata thermal_sys 11942 2 processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only dual slot (2x8) PCI-e GFX Hydra part [1002:5a12] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: <access denied> 00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device [1002:5a23] Subsystem: ATI Technologies Inc Device [1002:5a23] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 24 Capabilities: <access denied> 00:04.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at d000 [size=8] Region 1: I/O ports at c000 [size=4] Region 2: I/O ports at b000 [size=8] Region 3: I/O ports at a000 [size=4] Region 4: I/O ports at 9000 [size=16] Region 5: Memory at feafa400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feaf6000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feaf7000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at feafa800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feaf9000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at feafac00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3d) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fdf00000-fe7fffff Prefetchable memory behind bridge: fc000000-fcffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device [1002:4396] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at feafb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:19.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1b.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1b.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1b.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1b.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1b.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1b.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:04.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller]) Subsystem: Super Micro Computer Inc Device [15d9:a811] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Super Micro Computer Inc Device [15d9:ab11] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feb60000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at feb40000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at e400 [size=32] Region 3: Memory at feb1c000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at feb20000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: igb 02:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Super Micro Computer Inc Device [15d9:ab11] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at febc0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at e800 [size=32] Region 3: Memory at feb9c000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at feba0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: igb ** USB devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0557:2221 ATEN International Co., Ltd Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0719 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.7 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/32 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-48squeeze1 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: The machine boots to serial console, issuing a stream of [ 7.966320] ------------[ cut here ]------------ [ 7.994141] WARNING: at /build/buildd-linux-2.6_2.6.32-48squeeze1-amd64-qu4MIV/linux-2.6-2.6.32/debian/build/source_amd64_none/fs/sysfs/dir.c:491 sysfs_add_one+0xcc/0xe4() [ 8.085902] Hardware name: H8DGU [ 8.105310] sysfs: cannot create duplicate filename '/devices/system/machinecheck/machinecheck1/threshold_bank0' [ 8.166356] Modules linked in: [ 8.184729] Pid: 1, comm: swapper Not tainted 2.6.32-5-amd64 #1 [ 8.220397] Call Trace: [ 8.235105] [<ffffffff81140d73>] ? sysfs_add_one+0xcc/0xe4 [ 8.268556] [<ffffffff81140d73>] ? sysfs_add_one+0xcc/0xe4 [ 8.302039] [<ffffffff8104dfcc>] ? warn_slowpath_common+0x77/0xa3 [ 8.339117] [<ffffffff8104e054>] ? warn_slowpath_fmt+0x51/0x59 [ 8.374633] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d [ 8.408588] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d [ 8.442543] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d [ 8.476500] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d [ 8.510457] [<ffffffff81140d73>] ? sysfs_add_one+0xcc/0xe4 [ 8.543892] [<ffffffff811412ef>] ? create_dir+0x4f/0x7c [ 8.575770] [<ffffffff81141351>] ? sysfs_create_dir+0x35/0x4a [ 8.610768] [<ffffffff811903b7>] ? kobject_get+0x12/0x17 [ 8.643163] [<ffffffff811904ed>] ? kobject_add_internal+0xcb/0x181 [ 8.680762] [<ffffffff8119074f>] ? kobject_add+0x74/0x7c [ 8.713183] [<ffffffff811963fa>] ? sprintf+0x51/0x59 [ 8.743523] [<ffffffff810e87d1>] ? __kmalloc+0x12f/0x141 [ 8.775919] [<ffffffff81190264>] ? kobject_create+0x10/0x2c [ 8.809875] [<ffffffff81190214>] ? kobject_init+0x42/0x82 [ 8.842794] [<ffffffff8119027b>] ? kobject_create+0x27/0x2c [ 8.876749] [<ffffffff81190785>] ? kobject_create_and_add+0x2e/0x5b [ 8.914924] [<ffffffff812f620f>] ? threshold_create_bank+0x16f/0x287 [ 8.953614] [<ffffffff81525db1>] ? threshold_init_device+0x40/0x86 [ 8.991258] [<ffffffff81525d71>] ? threshold_init_device+0x0/0x86 [ 9.028351] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174 [ 9.063380] [<ffffffff8151e677>] ? kernel_init+0x158/0x1ae [ 9.096816] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71 [ 9.131814] [<ffffffff81011baa>] ? child_rip+0xa/0x20 [ 9.162662] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71 [ 9.197701] [<ffffffff8151e51f>] ? kernel_init+0x0/0x1ae [ 9.230095] [<ffffffff81011ba0>] ? child_rip+0x0/0x20 [ 9.260934] ---[ end trace 838cc524170d8628 ]--- [ 9.288645] kobject_add_internal failed for threshold_bank0 with -EEXIST, don't try to register things with the same name in the same directory. [ 9.366333] Pid: 1, comm: swapper Tainted: G W 2.6.32-5-amd64 #1 [ 9.406535] Call Trace: [ 9.421239] [<ffffffff81190590>] ? kobject_add_internal+0x16e/0x181 [ 9.459369] [<ffffffff8119074f>] ? kobject_add+0x74/0x7c [ 9.491763] [<ffffffff811963fa>] ? sprintf+0x51/0x59 [ 9.522078] [<ffffffff810e87d1>] ? __kmalloc+0x12f/0x141 [ 9.554474] [<ffffffff81190264>] ? kobject_create+0x10/0x2c [ 9.588432] [<ffffffff81190214>] ? kobject_init+0x42/0x82 [ 9.621346] [<ffffffff8119027b>] ? kobject_create+0x27/0x2c [ 9.655305] [<ffffffff81190785>] ? kobject_create_and_add+0x2e/0x5b [ 9.693425] [<ffffffff812f620f>] ? threshold_create_bank+0x16f/0x287 [ 9.732063] [<ffffffff81525db1>] ? threshold_init_device+0x40/0x86 [ 9.769657] [<ffffffff81525d71>] ? threshold_init_device+0x0/0x86 [ 9.806733] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174 [ 9.841728] [<ffffffff8151e677>] ? kernel_init+0x158/0x1ae [ 9.875164] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71 [ 9.910160] [<ffffffff81011baa>] ? child_rip+0xa/0x20 [ 9.941048] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71 [ 9.976045] [<ffffffff8151e51f>] ? kernel_init+0x0/0x1ae [ 10.008441] [<ffffffff81011ba0>] ? child_rip+0x0/0x20 [ 10.039276] kobject_create_and_add: kobject_add error: -17 [ 10.072196] ------------[ cut here ]------------ which takes a few minutes to transmit during boot (complete boot log on request).
--- End Message ---
--- Begin Message ---Version: 3.4.1-1~experimental.1+rm Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source package will no longer be updated. This bug is being closed on the assumption that it does not affect the kernel versions in newer Debian releases. If you can still reproduce this bug in a newer release, please reopen the bug report and reassign it to 'src:linux' and the affected version of the package. You can find the package version for the running kernel by running: uname -v or the versions of all installed kernel packages by running: dpkg -l 'linux-image-[34]*' | grep ^.i and looking at the third column. I apologise that we weren't able to provide a specific resolution for this bug. Ben. -- Ben Hutchings - Debian developer, member of Linux kernel and LTS teams
--- End Message ---
