Package: src:linux
Version: 3.16.57-2
Severity: important

We use OpenNebula on Debian 8 to run KVM guests.  Our latest upgrade of the 
host and guests broke badly.
The host can not run guests with the latest kernels from Debian 8 and 9.  If we 
downgrade the kernel on 
host or guest the problem is no longer present.

To localize the root problem, I managed to launch a KVM guest on the command 
line using the lastest 
Debian live CD and the problem was the same.  This is not a problem of 
OpenNebula. 

I need help to collect more information about what is going wrong on the guest 
and the host.

Kind regards
Jose M Calhariz



-- Package-specific info:
** Version:
Linux version 3.16.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 
4.9.2 (Debian 4.9.2-10+deb8u1) ) #1 SMP Debian 3.16.57-2 (2018-07-14)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-6-amd64 root=/dev/mapper/system-root ro quiet

** Tainted: I (2048)
 * Working around severe firmware bug.

** Kernel log:

[ 1176.926137] kvm [12584]: vcpu0 unhandled rdmsr: 0x1c9
[ 1176.926209] kvm [12584]: vcpu0 unhandled rdmsr: 0x1a6
[ 1176.926275] kvm [12584]: vcpu0 unhandled rdmsr: 0x1a7
[ 1176.926341] kvm [12584]: vcpu0 unhandled rdmsr: 0x3f6


** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R410
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: 1.9.0
board_vendor: Dell Inc.
board_name: 01V648
board_version: A04

** Loaded modules:
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
xt_physdev
ip_set
nfnetlink
vhost_net
vhost
macvtap
macvlan
tun
xt_multiport
iptable_filter
ip_tables
x_tables
dm_round_robin
ib_iser
rdma_cm
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
ib_addr
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
rpcsec_gss_krb5
nfsv4
dns_resolver
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
bridge
8021q
garp
stp
mrp
llc
dm_queue_length
dm_multipath
scsi_dh
intel_powerclamp
coretemp
kvm_intel
ttm
drm_kms_helper
kvm
drm
crc32_pclmul
ipmi_devintf
iTCO_wdt
iTCO_vendor_support
dcdbas
joydev
evdev
aesni_intel
acpi_power_meter
serio_raw
aes_x86_64
pcspkr
ipmi_si
lrw
lpc_ich
gf128mul
tpm_tis
glue_helper
tpm
mfd_core
ablk_helper
cryptd
i7core_edac
ipmi_msghandler
edac_core
shpchp
processor
thermal_sys
button
xfs
libcrc32c
dm_mod
raid1
md_mod
sd_mod
crc_t10dif
crct10dif_generic
hid_generic
usbhid
hid
usb_storage
sg
sr_mod
cdrom
mptsas
ahci
libahci
scsi_transport_sas
ehci_pci
uhci_hcd
mptscsih
ehci_hcd
libata
mptbase
igb
i2c_algo_bit
crct10dif_pclmul
crct10dif_common
i2c_core
crc32c_intel
dca
usbcore
ptp
psmouse
usb_common
scsi_mod
pps_core
bnx2

** Network interface configuration:

(...) Privacy concerns



** Network status:
*** IP interfaces and addresses:

(...) Privacy concerns

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
eth0.600: 464024832 5969272    0    0    0     0          0      2853 17974996  
 97260    0    0    0     0       0          0
    lo:   90138    1748    0    0    0     0          0         0    90138    
1748    0    0    0     0       0          0
  eth3: 1783009756  398665    0 1726    0     0          0     30266 71899026  
240175    0    0    0     0       0          0
br0011: 55169743  796451    0    0    0     0          0         0    35956     
418    0    0    0     0       0          0
  eth2: 14674510167 6452216    0 1726    0     0          0     30478 559178254 
6193727    0    0    0     0       0          0
eth0.11: 91505035 1195004    0    0    0     0          0    895144 98536503  
364324    0    0    0     0       0          0
brj600: 14577853219 6342345    0    0    0     0          0         0 559177990 
6193723    0    0    0     0       0          0
  eth1:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
brj601: 1772277206  299405    0    0    0     0          0         0 71645058  
236327    0    0    0     0       0          0
  eth0: 2119825552 12748932   81 1723    0    81          0   1859406 
21539361933 14723412    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    8615928 total packets received
    1518 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    8002257 incoming packets delivered
    7038705 requests sent out
    4 fragments received ok
    8 fragments created
Icmp:
    9817 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 11
        echo requests: 9806
    9822 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 16
        echo replies: 9806
IcmpMsg:
        InType3: 11
        InType8: 9806
        OutType0: 9806
        OutType3: 16
Tcp:
    1111 active connections openings
    415 passive connection openings
    863 failed connection attempts
    171 connection resets received
    6 connections established
    7953192 segments received
    20712151 segments send out
    565 segments retransmited
    0 bad segments received.
    868 resets sent
Udp:
    15151 packets received
    16 packets to unknown port received.
    0 packet receive errors
    70496 packets sent
UdpLite:
TcpExt:
    8 TCP sockets finished time wait in fast timer
    17450 delayed acks sent
    5 delayed acks further delayed because of locked socket
    Quick ack mode was activated 3 times
    764 packets directly queued to recvmsg prequeue.
    1870 bytes directly received in process context from prequeue
    6624168 packet headers predicted
    12423 acknowledgments not containing data payload received
    4369968 predicted acknowledgments
    91 times recovered from packet loss by selective acknowledgements
    TCPLostRetransmit: 3
    1 timeouts after SACK recovery
    98 fast retransmits
    2 forward retransmits
    42 other TCP timeouts
    TCPLossProbes: 26
    TCPLossProbeRecovery: 13
    9 SACK retransmits failed
    3 DSACKs sent for old packets
    3 DSACKs received
    1 connections reset due to unexpected data
    31 connections aborted due to timeout
    TCPDSACKIgnoredNoUndo: 2
    TCPSackShifted: 748
    TCPSackMerged: 358
    TCPSackShiftFallback: 473
    TCPRcvCoalesce: 42
    TCPOFOQueue: 125
    TCPSpuriousRtxHostQueues: 117
    TCPAutoCorking: 25422
    TCPFromZeroWindowAdv: 4
    TCPToZeroWindowAdv: 4
    TCPWantZeroWindowAdv: 2089
    TCPSynRetrans: 102
    TCPOrigDataSent: 17363268
IpExt:
    InMcastPkts: 834
    InBcastPkts: 23247
    InOctets: 17458816406
    OutOctets: 21004783874
    InMcastOctets: 26704
    InBcastOctets: 1908504
    InNoECTPkts: 9399620


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port 
[8086:3403] (rev 13)
        Subsystem: Dell PowerEdge R410 I/O Hub to ESI Port [1028:028c]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 15
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: da000000-ddffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000f000-0000ffff
        Memory behind bridge: df100000-df2fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express 
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: df300000-df5fffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System 
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>
        Kernel driver in use: i7core_edac

00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and 
Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status 
and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
        Subsystem: Dell PowerEdge R410 USB UHCI Controller [1028:028c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 17
        Region 4: I/O ports at ec20 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
        Subsystem: Dell PowerEdge R410 USB UHCI Controller [1028:028c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 18
        Region 4: I/O ports at ec40 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
        Subsystem: Dell PowerEdge R410 USB EHCI Controller [1028:028c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 19
        Region 0: Memory at df0fd000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
        Subsystem: Dell PowerEdge R410 USB UHCI Controller [1028:028c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 21
        Region 4: I/O ports at ec60 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
        Subsystem: Dell PowerEdge R410 USB UHCI Controller [1028:028c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 20
        Region 4: I/O ports at ec80 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
        Subsystem: Dell PowerEdge R410 USB UHCI Controller [1028:028c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 21
        Region 4: I/O ports at eca0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
        Subsystem: Dell PowerEdge R410 USB UHCI Controller [1028:028c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 20
        Region 4: I/O ports at ecc0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
        Subsystem: Dell PowerEdge R410 USB EHCI Controller [1028:028c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
90) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Memory behind bridge: de000000-deffffff
        Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface 
Controller [8086:3a16]
        Subsystem: Dell PowerEdge R410 LPC Interface Controller [1028:028c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA 
AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device [1028:028c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 84
        Region 0: I/O ports at ec10 [size=8]
        Region 1: I/O ports at ec08 [size=4]
        Region 2: I/O ports at ec18 [size=8]
        Region 3: I/O ports at ec0c [size=4]
        Region 4: I/O ports at ece0 [size=32]
        Region 5: Memory at df0ff000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 
Gigabit Ethernet [14e4:163b] (rev 20)
        Subsystem: Dell PowerEdge R410 BCM5716 Gigabit Ethernet [1028:028c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 36
        Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
        Capabilities: <access denied>
        Kernel driver in use: bnx2

01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5716 
Gigabit Ethernet [14e4:163b] (rev 20)
        Subsystem: Dell PowerEdge R410 BCM5716 Gigabit Ethernet [1028:028c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 48
        Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
        Capabilities: <access denied>
        Kernel driver in use: bnx2

02:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E 
PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
        Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller [1028:1f0f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 32
        Region 0: I/O ports at fc00 [size=256]
        Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at df100000 [disabled] [size=1M]
        Capabilities: <access denied>
        Kernel driver in use: mptsas

03:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network 
Connection [8086:1521] (rev 01)
        Subsystem: Intel Corporation Ethernet Server Adapter I350-T2 [8086:0002]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 38
        Region 0: Memory at df400000 (32-bit, non-prefetchable) [size=1M]
        Region 3: Memory at df3f8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: igb

03:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network 
Connection [8086:1521] (rev 01)
        Subsystem: Intel Corporation Ethernet Server Adapter I350-T2 [8086:0002]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 45
        Region 0: Memory at df500000 (32-bit, non-prefetchable) [size=1M]
        Region 3: Memory at df3fc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: igb

04:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA 
G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
        Subsystem: Dell PowerEdge R410 MGA G200eW WPCM450 [1028:028c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M]
        Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
        [virtual] Expansion ROM at de000000 [disabled] [size=64K]
        Capabilities: <access denied>

fe:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath 
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath 
Architecture System Address Decoder [8086:2d81] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 
[8086:2d90] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 
[8086:2d91] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 
0 [8086:2d92] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 
1 [8086:2d93] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 
[8086:2d94] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 
[8086:2d95] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Registers [8086:2d98] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller RAS Registers [8086:2d9a] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Test Registers [8086:2d9c] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

fe:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath 
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath 
Architecture System Address Decoder [8086:2d81] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 
[8086:2d90] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 
[8086:2d91] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 
0 [8086:2d92] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 
1 [8086:2d93] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 
[8086:2d94] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 
[8086:2d95] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Registers [8086:2d98] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller RAS Registers [8086:2d9a] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Test Registers [8086:2d9c] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated 
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0


** USB devices:
Bus 004 Device 003: ID 0624:0249 Avocent Corp. 
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0624:0248 Avocent Corp. 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 8.11
  APT prefers oldstable
  APT policy: (500, 'oldstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-6-amd64 (SMP w/24 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)

Versions of packages linux-image-3.16.0-6-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.56+deb8u1
ii  initramfs-tools [linux-initramfs-tool]  0.120+deb8u3
ii  kmod                                    18-3
ii  linux-base                              4.5~deb8u1

Versions of packages linux-image-3.16.0-6-amd64 recommends:
pn  firmware-linux-free  <none>
pn  irqbalance           <none>

Versions of packages linux-image-3.16.0-6-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-22+deb8u1
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-6-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16.0-6-amd64/postinst/depmod-error-initrd-3.16.0-6-amd64: false
  linux-image-3.16.0-6-amd64/prerm/removing-running-kernel-3.16.0-6-amd64: true
  linux-image-3.16.0-6-amd64/postinst/mips-initrd-3.16.0-6-amd64:

Reply via email to