Your message dated Wed, 03 Apr 2019 00:19:41 +0100 with message-id <f054f45ab97b72ffddf343541fc49f3173bba068.ca...@decadent.org.uk> and subject line Re: Bug#926261: linux-image-4.19.0-4-amd64: fan continiously spinning above 6900 RPM after resume on lenovo carbon x1 thinkpad with isa adapter has caused the Debian Bug report #926261, regarding linux-image-4.19.0-4-amd64: fan continiously spinning above 6900 RPM after resume on lenovo carbon x1 thinkpad with isa adapter to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 926261: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=926261 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: src:linux Version: 4.19.28-2 Severity: normal Dear Maintainer, Dear Debian, After resume fan is continiously spinning above 6900 RPM. This happens after resume the laptop, the problem accuring time to time. As a temporary workaround I have to to three or four suspend/resume cycles and after it fan1 decrease the speed. sensors looks like the following output: karol@pc:~$ sensors iwlwifi-virtual-0 Adapter: Virtual device temp1: +30.0°C pch_skylake-virtual-0 Adapter: Virtual device temp1: +34.5°C acpitz-acpi-0 Adapter: ACPI interface temp1: +48.0°C (crit = +128.0°C) thinkpad-isa-0000 Adapter: ISA adapter fan1: 6928 RPM coretemp-isa-0000 Adapter: ISA adapter Package id 0: +34.0°C (high = +100.0°C, crit = +100.0°C) Core 0: +32.0°C (high = +100.0°C, crit = +100.0°C) Core 1: +33.0°C (high = +100.0°C, crit = +100.0°C) I think the problem exist from long time, I reported this on redhat mailing list some time ago, but nothing happed: https://bugzilla.kernel.org/show_bug.cgi?id=191181 this is similar and marked as resolved, but actually seems not. Thank you and regards. -- Package-specific info: ** Version: Linux version 4.19.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64 root=UUID=0004b958-b7a4-474a-a282-2328a441eb3a ro quiet ** Tainted: WOE (12800) * Taint on warning. * Out-of-tree module has been loaded. * Unsigned module has been loaded. ** Kernel log: [35001.654200] IRQ 124: no longer affine to CPU3 [35001.655245] smpboot: CPU 3 is now offline [35001.665321] ACPI: Low-level resume complete [35001.665527] ACPI: EC: EC started [35001.665530] PM: Restoring platform NVS memory [35001.666492] Enabling non-boot CPUs ... [35001.666618] x86: Booting SMP configuration: [35001.666623] smpboot: Booting Node 0 Processor 1 APIC 0x2 [35001.669589] cache: parent cpu1 should not be sleeping [35001.670551] CPU1 is up [35001.670636] smpboot: Booting Node 0 Processor 2 APIC 0x1 [35001.674083] cache: parent cpu2 should not be sleeping [35001.675832] CPU2 is up [35001.675934] smpboot: Booting Node 0 Processor 3 APIC 0x3 [35001.678864] cache: parent cpu3 should not be sleeping [35001.679952] CPU3 is up [35001.703079] ACPI: Waking up from system sleep state S3 [35001.733668] ACPI: EC: interrupt unblocked [35001.794673] ACPI: EC: event unblocked [35002.091134] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [35002.367071] usb 1-9: reset full-speed USB device number 6 using xhci_hcd [35002.554916] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [35002.590992] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [35002.642791] usb 1-8: reset high-speed USB device number 5 using xhci_hcd [35002.834691] restoring control 00000000-0000-0000-0000-000000000101/10/5 [35002.834699] restoring control 00000000-0000-0000-0000-000000000101/12/11 [35003.344095] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [35004.773991] OOM killer enabled. [35004.773995] Restarting tasks ... done. [35004.786155] usb 1-2: USB disconnect, device number 19 [35004.786238] cdc_mbim 1-2:3.0 wwp0s20f0u2c3: unregister 'cdc_mbim' usb-0000:00:14.0-2, CDC MBIM [35004.787782] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [35004.794783] Bluetooth: hci0: Device revision is 5 [35004.794786] Bluetooth: hci0: Secure boot is enabled [35004.794787] Bluetooth: hci0: OTP lock is enabled [35004.794788] Bluetooth: hci0: API lock is enabled [35004.794789] Bluetooth: hci0: Debug lock is disabled [35004.794790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [35004.794795] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [35004.814176] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [35004.814193] option 1-2:3.2: device disconnected [35004.827919] PM: suspend exit [35005.055769] e1000e: enp0s31f6 NIC Link is Down [35005.116434] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [35005.326260] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [35005.390476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35005.649795] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35005.878157] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. [35005.919512] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35005.995710] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35006.345350] Bluetooth: hci0: Waiting for firmware download to complete [35006.345759] Bluetooth: hci0: Firmware loaded in 1522657 usecs [35006.345801] Bluetooth: hci0: Waiting for device to boot [35006.356821] Bluetooth: hci0: Device booted in 10793 usecs [35006.356830] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [35006.360939] Bluetooth: hci0: Applying Intel DDC parameters completed [35006.694108] usb 1-2: new high-speed USB device number 20 using xhci_hcd [35006.844579] usb 1-2: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 [35006.844589] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [35006.844595] usb 1-2: Product: HUAWEI Mobile [35006.844601] usb 1-2: Manufacturer: Huawei Technologies Co., Ltd. [35006.844607] usb 1-2: SerialNumber: 0123456789ABCDEF [35006.936479] cdc_ether 1-2:2.0 wwan0: register 'cdc_ether' at usb-0000:00:14.0-2, Mobile Broadband Network Device, 02:1e:10:1f:00:00 [35006.937554] option 1-2:2.2: GSM modem (1-port) converter detected [35006.937934] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 [35006.938661] option 1-2:2.3: GSM modem (1-port) converter detected [35006.938937] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 [35006.939492] option 1-2:2.4: GSM modem (1-port) converter detected [35006.939752] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2 [35006.940310] option 1-2:2.5: GSM modem (1-port) converter detected [35006.940573] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3 [35006.941147] option 1-2:2.6: GSM modem (1-port) converter detected [35006.941399] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB4 [35007.093607] cdc_ether 1-2:2.0 wwp0s20f0u2c2: renamed from wwan0 [35007.618954] cdc_ether 1-2:2.0 wwp0s20f0u2c2: unregister 'cdc_ether' usb-0000:00:14.0-2, Mobile Broadband Network Device [35007.650463] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [35007.650526] option 1-2:2.2: device disconnected [35007.650767] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [35007.650816] option 1-2:2.3: device disconnected [35007.651176] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [35007.651221] option 1-2:2.4: device disconnected [35007.655927] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [35007.656044] option 1-2:2.5: device disconnected [35007.670244] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 [35007.670367] option 1-2:2.6: device disconnected [35007.906701] cdc_mbim 1-2:3.0: setting rx_max = 16384 [35007.907076] cdc_mbim 1-2:3.0: NDP will be placed at end of frame for this device. [35007.907479] cdc_mbim 1-2:3.0: cdc-wdm1: USB WDM device [35007.908531] cdc_mbim 1-2:3.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-2, CDC MBIM, 7e:39:88:2a:04:27 [35007.909714] option 1-2:3.2: GSM modem (1-port) converter detected [35007.910112] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 [35007.930020] cdc_mbim 1-2:3.0 wwp0s20f0u2c3: renamed from wwan0 [35009.463367] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [35010.639782] wlp4s0: authenticate with a0:f3:c1:bc:90:53 [35010.649166] wlp4s0: send auth to a0:f3:c1:bc:90:53 (try 1/3) [35010.661214] wlp4s0: authenticated [35010.661907] wlp4s0: associate with a0:f3:c1:bc:90:53 (try 1/3) [35010.666228] wlp4s0: RX AssocResp from a0:f3:c1:bc:90:53 (capab=0x431 status=0 aid=3) [35010.672040] wlp4s0: associated [35010.689977] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready ** Model information sys_vendor: LENOVO product_name: 20FC0038PB product_version: ThinkPad X1 Carbon 4th chassis_vendor: LENOVO chassis_version: None bios_vendor: LENOVO bios_version: N1FET66W (1.40 ) board_vendor: LENOVO board_name: 20FC0038PB board_version: SDK0J40705 WIN ** Loaded modules: nls_ascii nls_cp437 vfat fat sg sd_mod uas usb_storage scsi_mod hid_jabra snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device ctr ccm fuse ipt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo nft_counter nft_chain_nat_ipv4 nf_nat_ipv4 xt_addrtype nft_compat xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc nf_tables nfnetlink tun rfcomm cmac pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) cdc_mbim cdc_wdm cdc_ncm snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic vboxdrv(OE) cdc_ether option usb_wwan usbnet usbserial mii aufs(OE) bnep overlay arc4 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mei_wdt media btusb btrtl btbcm btintel wmi_bmof snd_soc_skl sparse_keymap bluetooth snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi drbg iwlmvm ansi_cprng snd_soc_core intel_rapl mac80211 ecdh_generic x86_pkg_temp_thermal snd_compress intel_powerclamp i915 snd_hda_intel kvm_intel iwlwifi snd_hda_codec snd_hda_core kvm snd_hwdep cfg80211 snd_pcm drm_kms_helper irqbypass intel_cstate intel_uncore snd_timer intel_rapl_perf joydev rtsx_pci_ms evdev serio_raw hid_sensor_accel_3d pcspkr thinkpad_acpi hid_sensor_trigger nvram snd hid_sensor_iio_common tpm_tis drm iTCO_wdt memstick iTCO_vendor_support mei_me soundcore tpm_tis_core industrialio_triggered_buffer tpm kfifo_buf mei industrialio intel_pch_thermal i2c_algo_bit rng_core rfkill battery ac wmi button video pcc_cpufreq coretemp parport_pc sunrpc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto ecb btrfs zstd_decompress zstd_compress xxhash algif_skcipher af_alg dm_crypt dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_logitech_hidpp hid_logitech_dj usbhid raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear hid_sensor_custom md_mod hid_sensor_hub hid_generic intel_ishtp_hid hid crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc rtsx_pci_sdmmc mmc_core aesni_intel aes_x86_64 xhci_pci crypto_simd cryptd e1000e glue_helper xhci_hcd psmouse nvme i2c_i801 usbcore rtsx_pci intel_ish_ipc nvme_core thermal intel_ishtp usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [8086:1904] (rev 08) Subsystem: Lenovo Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers [17aa:2238] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: skl_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake GT2 [HD Graphics 520] [8086:1916] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Lenovo Skylake GT2 [HD Graphics 520] [17aa:2238] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 134 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at e000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [8086:1911] Subsystem: Lenovo Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model [17aa:2238] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 255 Region 0: Memory at f1348000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:13.0 Non-VGA unclassified device [0000]: Intel Corporation Sunrise Point-LP Integrated Sensor Hub [8086:9d35] (rev 21) Subsystem: Lenovo Sunrise Point-LP Integrated Sensor Hub [17aa:2238] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at f1349000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_ish_ipc Kernel modules: intel_ish_ipc 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI]) Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller [17aa:2238] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 124 Region 0: Memory at f1320000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21) Subsystem: Lenovo Sunrise Point-LP Thermal subsystem [17aa:2238] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f134a000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP CSME HECI #1 [8086:9d3a] (rev 21) Subsystem: Lenovo Sunrise Point-LP CSME HECI [17aa:2238] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 123 Region 0: Memory at f134b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 [8086:9d10] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f1200000-f12fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #3 [8086:9d12] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: f1100000-f11fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 [8086:9d14] (rev f1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: f1000000-f10fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller [8086:9d48] (rev 21) Subsystem: Lenovo Sunrise Point-LP LPC Controller [17aa:2238] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC [8086:9d21] (rev 21) Subsystem: Lenovo Sunrise Point-LP PMC [17aa:2238] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at f1344000 (32-bit, non-prefetchable) [size=16K] 00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio [8086:9d70] (rev 21) Subsystem: Lenovo Sunrise Point-LP HD Audio [17aa:2238] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 126 Region 0: Memory at f1340000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at f1330000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel, snd_soc_skl 00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev 21) Subsystem: Lenovo Sunrise Point-LP SMBus [17aa:2238] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at f134c000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection I219-LM [8086:156f] (rev 21) Subsystem: Lenovo Ethernet Connection I219-LM [17aa:2233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 135 Region 0: Memory at f1300000 (32-bit, non-prefetchable) [size=128K] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01) Subsystem: Lenovo RTS525A PCI Express Card Reader [17aa:2238] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 122 Region 1: Memory at f1200000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci 04:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a) Subsystem: Intel Corporation Wireless 8260 [8086:0130] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 133 Region 0: Memory at f1100000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 05:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a804] (prog-if 02 [NVM Express]) Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961 [144d:a801] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 NUMA node: 0 Region 0: Memory at f1000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 138a:0090 Validity Sensors, Inc. VFS7500 Touch Fingerprint Sensor Bus 001 Device 005: ID 13d3:5248 IMC Networks Bus 001 Device 004: ID 8087:0a2b Intel Corp. Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 001 Device 020: ID 12d1:15c1 Huawei Technologies Co., Ltd. ME906s LTE M.2 Module Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-4-amd64 (SMP w/4 CPU cores) Kernel taint flags: TAINT_WARN, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8), LANGUAGE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-4-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133 ii kmod 26-1 ii linux-base 4.5 Versions of packages linux-image-4.19.0-4-amd64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 ii irqbalance 1.5.0-3 Versions of packages linux-image-4.19.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-1 ii grub-pc 2.02+dfsg1-16 pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-4-amd64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
--- End Message ---
--- Begin Message ---On Tue, 2019-04-02 at 20:20 +0200, KarolSzk wrote: > Package: src:linux > Version: 4.19.28-2 > Severity: normal > > Dear Maintainer, Dear Debian, > > After resume fan is continiously spinning above 6900 RPM. This happens after > resume the laptop, the problem accuring time to time. As a temporary > workaround > I have to to three or four suspend/resume cycles and after it fan1 decrease > the > speed. > sensors looks like the following output: [...] Linux doesn't control the fan, that's done by the system firmware. Ben. -- Ben Hutchings Q. Which is the greater problem in the world today, ignorance or apathy? A. I don't know and I couldn't care less.signature.asc
Description: This is a digitally signed message part
--- End Message ---