I can confirm I've seen the same symptoms on my system. I was unable to
get a working X session (although the cursor would appear on one of my
two displays). Manual startx would also fail.
HW:
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller
(rev 06)
Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor
PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen
Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor
Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor
HD Audio Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor
HD Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USB xHCI (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family
USB xHCI
Flags: bus master, medium devsel, latency 0, IRQ 24
Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family
MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USB EHCI #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family
USB EHCI
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High
Definition Audio Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset High
Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #1 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #3 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI
Express Root Port #5 (rev d4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family
USB EHCI
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation H87 Express LPC Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. H87 Express LPC Controller
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family
6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family
6-port SATA Controller 1 [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 25
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus
Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family
SMBus Controller
Flags: medium devsel, IRQ 18
Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411
PCI Express Gigabit Ethernet Controller (rev 0c)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit
Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at e000 [size=256]
Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
Subsystem: Intel Corporation Gigabit CT Desktop Adapter
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f7cc0000 (32-bit, non-prefetchable) [size=128K]
Memory at f7c00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at d000 [disabled] [size=32]
Memory at f7ce0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f7c80000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
CPU:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 39 bits physical, 48 bits virtual
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 60
Model name: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
Stepping: 3
CPU MHz: 3619.423
CPU max MHz: 3900.0000
CPU min MHz: 800.0000
BogoMIPS: 6784.91
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt
tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm cpuid_fault epb
invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid
ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida
arat pln pts flush_l1d
And example X log when starting manually:
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 418.693] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 418.693] Current Operating System: Linux zen 4.19.0-4-amd64 #1 SMP Debian
4.19.28-2 (2019-03-15) x86_64
[ 418.693] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-4-amd64
root=/dev/mapper/zen--ssd1-rootfs ro quiet
[ 418.693] Build Date: 25 October 2018 06:15:23PM
[ 418.693] xorg-server 2:1.20.3-1 (https://www.debian.org/support)
[ 418.693] Current version of pixman: 0.36.0
[ 418.693] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 418.693] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 418.694] (==) Log file: "/home/alex/.local/share/xorg/Xorg.1.log", Time:
Mon Apr 29 09:14:51 2019
[ 418.694] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 418.694] (==) No Layout section. Using the first Screen section.
[ 418.694] (==) No screen section available. Using defaults.
[ 418.694] (**) |-->Screen "Default Screen Section" (0)
[ 418.694] (**) | |-->Monitor "<default monitor>"
[ 418.695] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 418.695] (==) Automatically adding devices
[ 418.695] (==) Automatically enabling devices
[ 418.695] (==) Automatically adding GPU devices
[ 418.695] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 418.695] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 418.695] Entry deleted from font path.
[ 418.695] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 418.695] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 418.695] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 418.695] (II) Loader magic: 0x560bdf3a3e20
[ 418.695] (II) Module ABI versions:
[ 418.695] X.Org ANSI C Emulation: 0.4
[ 418.695] X.Org Video Driver: 24.0
[ 418.695] X.Org XInput driver : 24.1
[ 418.695] X.Org Server Extension : 10.0
[ 418.696] (++) using VT number 2
[ 418.699] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/_35
[ 418.699] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 418.700] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 418.701] (--) PCI:*(0@0:2:0) 8086:0412:1043:8534 rev 6, Mem @
0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @
0x????????/131072
[ 418.701] (II) LoadModule: "glx"
[ 418.701] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 418.702] (II) Module glx: vendor="X.Org Foundation"
[ 418.702] compiled for 1.20.3, module version = 1.0.0
[ 418.702] ABI class: X.Org Server Extension, version 10.0
[ 418.702] (==) Matched modesetting as autoconfigured driver 0
[ 418.702] (==) Matched fbdev as autoconfigured driver 1
[ 418.702] (==) Matched vesa as autoconfigured driver 2
[ 418.702] (==) Assigned the driver to the xf86ConfigLayout
[ 418.702] (II) LoadModule: "modesetting"
[ 418.702] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 418.702] (II) Module modesetting: vendor="X.Org Foundation"
[ 418.702] compiled for 1.20.3, module version = 1.20.3
[ 418.702] Module class: X.Org Video Driver
[ 418.702] ABI class: X.Org Video Driver, version 24.0
[ 418.702] (II) LoadModule: "fbdev"
[ 418.702] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 418.702] (II) Module fbdev: vendor="X.Org Foundation"
[ 418.702] compiled for 1.20.0, module version = 0.5.0
[ 418.702] Module class: X.Org Video Driver
[ 418.702] ABI class: X.Org Video Driver, version 24.0
[ 418.702] (II) LoadModule: "vesa"
[ 418.702] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 418.702] (II) Module vesa: vendor="X.Org Foundation"
[ 418.702] compiled for 1.20.1, module version = 2.4.0
[ 418.702] Module class: X.Org Video Driver
[ 418.702] ABI class: X.Org Video Driver, version 24.0
[ 418.702] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 418.702] (II) FBDEV: driver for framebuffer: fbdev
[ 418.702] (II) VESA: driver for VESA chipsets: vesa
[ 418.702] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not
permitted)
[ 418.702] (II) modeset(0): using drv /dev/dri/card0
[ 418.702] (WW) Falling back to old probe method for fbdev
[ 418.702] (II) Loading sub module "fbdevhw"
[ 418.702] (II) LoadModule: "fbdevhw"
[ 418.702] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 418.702] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 418.702] compiled for 1.20.3, module version = 0.0.2
[ 418.702] ABI class: X.Org Video Driver, version 24.0
[ 418.702] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 418.702] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 418.702] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 418.702] (==) modeset(0): RGB weight 888
[ 418.702] (==) modeset(0): Default visual is TrueColor
[ 418.702] (II) Loading sub module "glamoregl"
[ 418.702] (II) LoadModule: "glamoregl"
[ 418.702] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 418.704] (II) Module glamoregl: vendor="X.Org Foundation"
[ 418.704] compiled for 1.20.3, module version = 1.0.1
[ 418.704] ABI class: X.Org ANSI C Emulation, version 0.4
[ 418.716] (II) modeset(0): glamor X acceleration enabled on Mesa DRI
Intel(R) Haswell Desktop
[ 418.716] (II) modeset(0): glamor initialized
[ 418.730] (II) modeset(0): Output VGA-1 has no monitor section
[ 418.744] (II) modeset(0): Output HDMI-1 has no monitor section
[ 418.745] (II) modeset(0): Output HDMI-2 has no monitor section
[ 418.759] (II) modeset(0): EDID for output VGA-1
[ 418.759] (II) modeset(0): Manufacturer: IVM Model: 610f Serial#: 16843009
[ 418.759] (II) modeset(0): Year: 2012 Week: 36
[ 418.759] (II) modeset(0): EDID Version: 1.3
[ 418.759] (II) modeset(0): Analog Display Input, Input Voltage Level:
0.700/0.700 V
[ 418.759] (II) modeset(0): Sync: Separate
[ 418.759] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 418.759] (II) modeset(0): Gamma: 2.20
[ 418.759] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 418.759] (II) modeset(0): First detailed timing is preferred mode
[ 418.759] (II) modeset(0): redX: 0.638 redY: 0.331 greenX: 0.309 greenY:
0.626
[ 418.759] (II) modeset(0): blueX: 0.152 blueY: 0.071 whiteX: 0.313 whiteY:
0.329
[ 418.759] (II) modeset(0): Supported established timings:
[ 418.759] (II) modeset(0): 720x400@70Hz
[ 418.759] (II) modeset(0): 640x480@60Hz
[ 418.759] (II) modeset(0): 640x480@72Hz
[ 418.759] (II) modeset(0): 640x480@75Hz
[ 418.759] (II) modeset(0): 800x600@60Hz
[ 418.759] (II) modeset(0): 800x600@72Hz
[ 418.759] (II) modeset(0): 800x600@75Hz
[ 418.759] (II) modeset(0): 1024x768@60Hz
[ 418.759] (II) modeset(0): 1024x768@70Hz
[ 418.759] (II) modeset(0): 1024x768@75Hz
[ 418.759] (II) modeset(0): 1280x1024@75Hz
[ 418.759] (II) modeset(0): Manufacturer's mask: 0
[ 418.760] (II) modeset(0): Supported standard timings:
[ 418.760] (II) modeset(0): #0: hsize: 640 vsize 480 refresh: 66 vid: 17969
[ 418.760] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 418.760] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid:
35969
[ 418.760] (II) modeset(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 418.760] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 418.760] (II) modeset(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 418.760] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid:
16553
[ 418.760] (II) modeset(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid:
49361
[ 418.760] (II) modeset(0): Supported detailed timing:
[ 418.760] (II) modeset(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 418.760] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
h_blank_end 2080 h_border: 0
[ 418.760] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1209
v_blanking: 1235 v_border: 0
[ 418.760] (II) modeset(0): Serial No: 1120023602184
[ 418.760] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max:
94 kHz, PixClock max 215 MHz
[ 418.760] (II) modeset(0): Monitor name: X2485
[ 418.760] (II) modeset(0): EDID (in hex):
[ 418.760] (II) modeset(0): 00ffffffffffff0026cd0f6101010101
[ 418.760] (II) modeset(0): 24160103683420782a7115a3544fa027
[ 418.760] (II) modeset(0): 125054adcf0031468180818c9500950f
[ 418.760] (II) modeset(0): b300a940d1c0283c80a070b023403020
[ 418.760] (II) modeset(0): 360006442100001a000000ff00313132
[ 418.760] (II) modeset(0): 30303233363032313834000000fd0032
[ 418.760] (II) modeset(0): 4b1e5e15000a202020202020000000fc
[ 418.760] (II) modeset(0): 0058323438350a2020202020202000ce
[ 418.760] (II) modeset(0): Printing probed modes for output VGA-1
[ 418.760] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 418.760] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[ 418.760] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 418.760] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 418.760] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 418.760] (II) modeset(0): Modeline "1280x1024"x72.0 132.84 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 418.760] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 418.760] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688
1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 418.760] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672
1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 418.760] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 418.760] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 418.760] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 418.760] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 418.760] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 418.760] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 418.760] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 418.760] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 418.760] (II) modeset(0): Modeline "640x480"x66.0 26.89 640 664 728 816
480 481 484 499 -hsync +vsync (32.9 kHz)
[ 418.760] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 418.760] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 418.774] (II) modeset(0): EDID for output HDMI-1
[ 418.774] (II) modeset(0): Manufacturer: IVM Model: 610f Serial#: 16843009
[ 418.774] (II) modeset(0): Year: 2012 Week: 36
[ 418.774] (II) modeset(0): EDID Version: 1.3
[ 418.774] (II) modeset(0): Digital Display Input
[ 418.774] (II) modeset(0): DFP 1.x compatible TMDS
[ 418.774] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 418.774] (II) modeset(0): Gamma: 2.20
[ 418.774] (II) modeset(0): DPMS capabilities: Off
[ 418.774] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 418.774] (II) modeset(0): First detailed timing is preferred mode
[ 418.774] (II) modeset(0): redX: 0.638 redY: 0.331 greenX: 0.309 greenY:
0.626
[ 418.774] (II) modeset(0): blueX: 0.152 blueY: 0.071 whiteX: 0.313 whiteY:
0.329
[ 418.774] (II) modeset(0): Supported established timings:
[ 418.774] (II) modeset(0): 720x400@70Hz
[ 418.774] (II) modeset(0): 640x480@60Hz
[ 418.774] (II) modeset(0): 640x480@72Hz
[ 418.774] (II) modeset(0): 640x480@75Hz
[ 418.774] (II) modeset(0): 800x600@60Hz
[ 418.774] (II) modeset(0): 800x600@72Hz
[ 418.774] (II) modeset(0): 800x600@75Hz
[ 418.774] (II) modeset(0): 1024x768@60Hz
[ 418.774] (II) modeset(0): 1024x768@70Hz
[ 418.774] (II) modeset(0): 1024x768@75Hz
[ 418.774] (II) modeset(0): 1280x1024@75Hz
[ 418.774] (II) modeset(0): Manufacturer's mask: 0
[ 418.774] (II) modeset(0): Supported standard timings:
[ 418.774] (II) modeset(0): #0: hsize: 640 vsize 480 refresh: 66 vid: 17969
[ 418.774] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 418.774] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid:
35969
[ 418.774] (II) modeset(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 418.774] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 418.774] (II) modeset(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 418.774] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid:
16553
[ 418.774] (II) modeset(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid:
49361
[ 418.774] (II) modeset(0): Supported detailed timing:
[ 418.774] (II) modeset(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 418.774] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000
h_blank_end 2080 h_border: 0
[ 418.774] (II) modeset(0): v_active: 1200 v_sync: 1203 v_sync_end 1209
v_blanking: 1235 v_border: 0
[ 418.774] (II) modeset(0): Serial No: 1120023602183
[ 418.774] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max:
75 kHz, PixClock max 175 MHz
[ 418.774] (II) modeset(0): Monitor name: X2485
[ 418.774] (II) modeset(0): EDID (in hex):
[ 418.774] (II) modeset(0): 00ffffffffffff0026cd0f6101010101
[ 418.774] (II) modeset(0): 24160103813420782a7115a3544fa027
[ 418.774] (II) modeset(0): 125054adcf0031468180818c9500950f
[ 418.774] (II) modeset(0): b300a940d1c0283c80a070b023403020
[ 418.774] (II) modeset(0): 360006442100001a000000ff00313132
[ 418.774] (II) modeset(0): 30303233363032313833000000fd0032
[ 418.774] (II) modeset(0): 4b1e4b11000a202020202020000000fc
[ 418.774] (II) modeset(0): 0058323438350a2020202020202000cd
[ 418.775] (II) modeset(0): Printing probed modes for output HDMI-1
[ 418.775] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000
2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 418.775] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052
2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[ 418.775] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 418.775] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760
1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 418.775] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 418.775] (II) modeset(0): Modeline "1280x1024"x72.0 132.84 1280 1368 1504
1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 418.775] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 418.775] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688
1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 418.775] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520
1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 418.775] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 418.775] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 418.775] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 418.775] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 418.775] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 418.775] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 418.775] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 418.775] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 418.775] (II) modeset(0): Modeline "640x480"x66.0 26.89 640 664 728 816
480 481 484 499 -hsync +vsync (32.9 kHz)
[ 418.775] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 418.775] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 418.776] (II) modeset(0): EDID for output HDMI-2
[ 418.776] (II) modeset(0): Output VGA-1 connected
[ 418.776] (II) modeset(0): Output HDMI-1 connected
[ 418.776] (II) modeset(0): Output HDMI-2 disconnected
[ 418.776] (II) modeset(0): Using spanning desktop for initial modes
[ 418.776] (II) modeset(0): Output VGA-1 using initial mode 1920x1200 +0+0
[ 418.776] (II) modeset(0): Output HDMI-1 using initial mode 1920x1200 +1920+0
[ 418.776] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 418.776] (==) modeset(0): DPI set to (96, 96)
[ 418.776] (II) Loading sub module "fb"
[ 418.776] (II) LoadModule: "fb"
[ 418.776] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 418.776] (II) Module fb: vendor="X.Org Foundation"
[ 418.776] compiled for 1.20.3, module version = 1.0.0
[ 418.776] ABI class: X.Org ANSI C Emulation, version 0.4
[ 418.776] (II) UnloadModule: "fbdev"
[ 418.776] (II) Unloading fbdev
[ 418.776] (II) UnloadSubModule: "fbdevhw"
[ 418.776] (II) Unloading fbdevhw
[ 418.776] (II) UnloadModule: "vesa"
[ 418.777] (II) Unloading vesa
[ 418.838] (==) modeset(0): Backing store enabled
[ 418.838] (==) modeset(0): Silken mouse enabled
[ 418.945] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 418.945] (==) modeset(0): DPMS enabled
[ 418.946] (II) modeset(0): [DRI2] Setup complete
[ 418.946] (II) modeset(0): [DRI2] DRI driver: i965
[ 418.946] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 418.946] (II) Initializing extension Generic Event Extension
[ 418.946] (II) Initializing extension SHAPE
[ 418.946] (II) Initializing extension MIT-SHM
[ 418.946] (II) Initializing extension XInputExtension
[ 418.946] (II) Initializing extension XTEST
[ 418.946] (II) Initializing extension BIG-REQUESTS
[ 418.946] (II) Initializing extension SYNC
[ 418.947] (II) Initializing extension XKEYBOARD
[ 418.947] (II) Initializing extension XC-MISC
[ 418.947] (II) Initializing extension SECURITY
[ 418.947] (II) Initializing extension XFIXES
[ 418.947] (II) Initializing extension RENDER
[ 418.947] (II) Initializing extension RANDR
[ 418.947] (II) Initializing extension COMPOSITE
[ 418.947] (II) Initializing extension DAMAGE
[ 418.948] (II) Initializing extension MIT-SCREEN-SAVER
[ 418.948] (II) Initializing extension DOUBLE-BUFFER
[ 418.948] (II) Initializing extension RECORD
[ 418.948] (II) Initializing extension DPMS
[ 418.948] (II) Initializing extension Present
[ 418.948] (II) Initializing extension DRI3
[ 418.948] (II) Initializing extension X-Resource
[ 418.948] (II) Initializing extension XVideo
[ 418.948] (II) Initializing extension XVideo-MotionCompensation
[ 418.948] (II) Initializing extension SELinux
[ 418.948] (II) SELinux: Disabled on system
[ 418.948] (II) Initializing extension GLX
[ 418.954] (II) AIGLX: Loaded and initialized i965
[ 418.954] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 418.954] (II) Initializing extension XFree86-VidModeExtension
[ 418.954] (II) Initializing extension XFree86-DGA
[ 418.954] (II) Initializing extension XFree86-DRI
[ 418.954] (II) Initializing extension DRI2
[ 418.956] (II) modeset(0): Damage tracking initialized
[ 418.956] (II) modeset(0): Setting screen physical size to 1016 x 317
[ 418.985] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 418.985] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 418.985] (II) LoadModule: "libinput"
[ 418.985] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 418.988] (II) Module libinput: vendor="X.Org Foundation"
[ 418.988] compiled for 1.20.4, module version = 0.28.2
[ 418.988] Module class: X.Org XInput Driver
[ 418.988] ABI class: X.Org XInput driver, version 24.1
[ 418.988] (II) Using input driver 'libinput' for 'Power Button'
[ 418.989] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 20
paused 0
[ 418.989] (**) Power Button: always reports core events
[ 418.989] (**) Option "Device" "/dev/input/event1"
[ 418.989] (**) Option "_source" "server/udev"
[ 418.990] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 418.990] (II) event1 - Power Button: device is a keyboard
[ 418.990] (II) event1 - Power Button: device removed
[ 418.990] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 418.990] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 418.990] (**) Option "xkb_model" "pc105"
[ 418.990] (**) Option "xkb_layout" "gb"
[ 419.002] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 419.002] (II) event1 - Power Button: device is a keyboard
[ 419.002] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 419.002] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 419.002] (II) Using input driver 'libinput' for 'Video Bus'
[ 419.003] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23
paused 0
[ 419.003] (**) Video Bus: always reports core events
[ 419.003] (**) Option "Device" "/dev/input/event2"
[ 419.003] (**) Option "_source" "server/udev"
[ 419.004] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 419.004] (II) event2 - Video Bus: device is a keyboard
[ 419.004] (II) event2 - Video Bus: device removed
[ 419.004] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 419.004] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[ 419.004] (**) Option "xkb_model" "pc105"
[ 419.004] (**) Option "xkb_layout" "gb"
[ 419.004] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 419.004] (II) event2 - Video Bus: device is a keyboard
[ 419.005] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 419.005] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 419.005] (II) Using input driver 'libinput' for 'Power Button'
[ 419.005] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24
paused 0
[ 419.005] (**) Power Button: always reports core events
[ 419.006] (**) Option "Device" "/dev/input/event0"
[ 419.006] (**) Option "_source" "server/udev"
[ 419.006] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 419.006] (II) event0 - Power Button: device is a keyboard
[ 419.006] (II) event0 - Power Button: device removed
[ 419.006] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 419.006] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[ 419.006] (**) Option "xkb_model" "pc105"
[ 419.006] (**) Option "xkb_layout" "gb"
[ 419.007] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 419.007] (II) event0 - Power Button: device is a keyboard
[ 419.007] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3
(/dev/input/event16)
[ 419.007] (II) No input driver specified, ignoring this device.
[ 419.007] (II) This device may have been added with another device file.
[ 419.007] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7
(/dev/input/event17)
[ 419.007] (II) No input driver specified, ignoring this device.
[ 419.007] (II) This device may have been added with another device file.
[ 419.008] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8
(/dev/input/event18)
[ 419.008] (II) No input driver specified, ignoring this device.
[ 419.008] (II) This device may have been added with another device file.
[ 419.008] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000:
Mi (/dev/input/event20)
[ 419.008] (**) Microsoft® LifeCam HD-5000: Mi: Applying InputClass "libinput
keyboard catchall"
[ 419.008] (II) Using input driver 'libinput' for 'Microsoft® LifeCam
HD-5000: Mi'
[ 419.009] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 25
paused 0
[ 419.009] (**) Microsoft® LifeCam HD-5000: Mi: always reports core events
[ 419.009] (**) Option "Device" "/dev/input/event20"
[ 419.009] (**) Option "_source" "server/udev"
[ 419.010] (II) event20 - Microsoft® LifeCam HD-5000: Mi: is tagged by udev
as: Keyboard
[ 419.010] (II) event20 - Microsoft® LifeCam HD-5000: Mi: device is a keyboard
[ 419.010] (II) event20 - Microsoft® LifeCam HD-5000: Mi: device removed
[ 419.010] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input21/event20"
[ 419.010] (II) XINPUT: Adding extended input device "Microsoft® LifeCam
HD-5000: Mi" (type: KEYBOARD, id 9)
[ 419.010] (**) Option "xkb_model" "pc105"
[ 419.010] (**) Option "xkb_layout" "gb"
[ 419.010] (II) event20 - Microsoft® LifeCam HD-5000: Mi: is tagged by udev
as: Keyboard
[ 419.010] (II) event20 - Microsoft® LifeCam HD-5000: Mi: device is a keyboard
[ 419.011] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz
Transceiver v8.0 (/dev/input/event4)
[ 419.011] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying
InputClass "libinput keyboard catchall"
[ 419.011] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0'
[ 419.012] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26
paused 0
[ 419.012] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports
core events
[ 419.012] (**) Option "Device" "/dev/input/event4"
[ 419.012] (**) Option "_source" "server/udev"
[ 419.012] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v8.0: is
tagged by udev as: Keyboard
[ 419.012] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v8.0:
device is a keyboard
[ 419.013] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v8.0:
device removed
[ 419.013] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:045E:07B2.0002/input/input4/event4"
[ 419.013] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[ 419.013] (**) Option "xkb_model" "pc105"
[ 419.013] (**) Option "xkb_layout" "gb"
[ 419.013] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v8.0: is
tagged by udev as: Keyboard
[ 419.013] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v8.0:
device is a keyboard
[ 419.014] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz
Transceiver v8.0 Mouse (/dev/input/event5)
[ 419.014] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse: Applying
InputClass "libinput pointer catchall"
[ 419.014] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0 Mouse'
[ 419.075] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27
paused 0
[ 419.075] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse: always
reports core events
[ 419.075] (**) Option "Device" "/dev/input/event5"
[ 419.075] (**) Option "_source" "server/udev"
[ 419.076] (II) event5 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse:
is tagged by udev as: Mouse
[ 419.076] (II) event5 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse:
device is a pointer
[ 419.076] (II) event5 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse:
device removed
[ 419.076] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:07B2.0003/input/input5/event5"
[ 419.076] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0 Mouse" (type: MOUSE, id 11)
[ 419.077] (**) Option "AccelerationScheme" "none"
[ 419.077] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse: (accel)
selected scheme none/0
[ 419.077] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse: (accel)
acceleration factor: 2.000
[ 419.077] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse: (accel)
acceleration threshold: 4
[ 419.078] (II) event5 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse:
is tagged by udev as: Mouse
[ 419.078] (II) event5 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse:
device is a pointer
[ 419.079] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz
Transceiver v8.0 Mouse (/dev/input/mouse0)
[ 419.079] (II) No input driver specified, ignoring this device.
[ 419.079] (II) This device may have been added with another device file.
[ 419.079] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz
Transceiver v8.0 Consumer Control (/dev/input/event6)
[ 419.079] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: Applying InputClass "libinput keyboard catchall"
[ 419.079] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control'
[ 419.081] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28
paused 0
[ 419.081] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: always reports core events
[ 419.081] (**) Option "Device" "/dev/input/event6"
[ 419.081] (**) Option "_source" "server/udev"
[ 419.082] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: is tagged by udev as: Keyboard
[ 419.082] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device is a keyboard
[ 419.082] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device removed
[ 419.082] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: needs a virtual subdevice
[ 419.082] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:07B2.0003/input/input6/event6"
[ 419.082] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control" (type: MOUSE, id 12)
[ 419.082] (**) Option "AccelerationScheme" "none"
[ 419.082] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: (accel) selected scheme none/0
[ 419.082] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: (accel) acceleration factor: 2.000
[ 419.082] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: (accel) acceleration threshold: 4
[ 419.083] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: is tagged by udev as: Keyboard
[ 419.083] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device is a keyboard
[ 419.084] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz
Transceiver v8.0 Consumer Control (/dev/input/event7)
[ 419.084] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: Applying InputClass "libinput keyboard catchall"
[ 419.084] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control'
[ 419.086] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29
paused 0
[ 419.086] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: always reports core events
[ 419.086] (**) Option "Device" "/dev/input/event7"
[ 419.086] (**) Option "_source" "server/udev"
[ 419.087] (II) event7 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: is tagged by udev as: Keyboard
[ 419.087] (II) event7 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device is a keyboard
[ 419.087] (II) event7 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device removed
[ 419.087] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: needs a virtual subdevice
[ 419.087] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:07B2.0004/input/input7/event7"
[ 419.087] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control" (type: MOUSE, id 13)
[ 419.087] (**) Option "AccelerationScheme" "none"
[ 419.087] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: (accel) selected scheme none/0
[ 419.087] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: (accel) acceleration factor: 2.000
[ 419.087] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: (accel) acceleration threshold: 4
[ 419.089] (II) event7 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: is tagged by udev as: Keyboard
[ 419.089] (II) event7 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device is a keyboard
[ 419.089] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz
Transceiver v8.0 System Control (/dev/input/event8)
[ 419.089] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 System Control:
Applying InputClass "libinput keyboard catchall"
[ 419.089] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0 System Control'
[ 419.090] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 30
paused 0
[ 419.090] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 System Control:
always reports core events
[ 419.090] (**) Option "Device" "/dev/input/event8"
[ 419.090] (**) Option "_source" "server/udev"
[ 419.091] (II) event8 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 System
Control: is tagged by udev as: Keyboard
[ 419.091] (II) event8 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 System
Control: device is a keyboard
[ 419.091] (II) event8 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 System
Control: device removed
[ 419.091] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:07B2.0004/input/input9/event8"
[ 419.091] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0 System Control" (type: KEYBOARD, id 14)
[ 419.091] (**) Option "xkb_model" "pc105"
[ 419.091] (**) Option "xkb_layout" "gb"
[ 419.092] (II) event8 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 System
Control: is tagged by udev as: Keyboard
[ 419.092] (II) event8 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 System
Control: device is a keyboard
[ 419.092] (II) config/udev: Adding input device USB Optical Mouse
(/dev/input/event19)
[ 419.092] (**) USB Optical Mouse: Applying InputClass "libinput pointer
catchall"
[ 419.092] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[ 419.151] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 31
paused 0
[ 419.151] (**) USB Optical Mouse: always reports core events
[ 419.151] (**) Option "Device" "/dev/input/event19"
[ 419.151] (**) Option "_source" "server/udev"
[ 419.152] (II) event19 - USB Optical Mouse: is tagged by udev as: Mouse
[ 419.152] (II) event19 - USB Optical Mouse: device is a pointer
[ 419.152] (II) event19 - USB Optical Mouse: device removed
[ 419.152] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:045E:0797.0005/input/input20/event19"
[ 419.152] (II) XINPUT: Adding extended input device "USB Optical Mouse"
(type: MOUSE, id 15)
[ 419.152] (**) Option "AccelerationScheme" "none"
[ 419.152] (**) USB Optical Mouse: (accel) selected scheme none/0
[ 419.152] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 419.153] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 419.154] (II) event19 - USB Optical Mouse: is tagged by udev as: Mouse
[ 419.154] (II) event19 - USB Optical Mouse: device is a pointer
[ 419.154] (II) config/udev: Adding input device USB Optical Mouse
(/dev/input/mouse1)
[ 419.154] (II) No input driver specified, ignoring this device.
[ 419.154] (II) This device may have been added with another device file.
[ 419.155] (II) config/udev: Adding input device Logitech Logitech USB
Headset (/dev/input/event3)
[ 419.155] (**) Logitech Logitech USB Headset: Applying InputClass "libinput
keyboard catchall"
[ 419.155] (II) Using input driver 'libinput' for 'Logitech Logitech USB
Headset'
[ 419.156] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 32
paused 0
[ 419.156] (**) Logitech Logitech USB Headset: always reports core events
[ 419.156] (**) Option "Device" "/dev/input/event3"
[ 419.156] (**) Option "_source" "server/udev"
[ 419.158] (II) event3 - Logitech Logitech USB Headset: is tagged by udev
as: Keyboard
[ 419.158] (II) event3 - Logitech Logitech USB Headset: device is a keyboard
[ 419.158] (II) event3 - Logitech Logitech USB Headset: device removed
[ 419.158] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.3/0003:046D:0A44.0001/input/input3/event3"
[ 419.158] (II) XINPUT: Adding extended input device "Logitech Logitech USB
Headset" (type: KEYBOARD, id 16)
[ 419.158] (**) Option "xkb_model" "pc105"
[ 419.158] (**) Option "xkb_layout" "gb"
[ 419.159] (II) event3 - Logitech Logitech USB Headset: is tagged by udev
as: Keyboard
[ 419.159] (II) event3 - Logitech Logitech USB Headset: device is a keyboard
[ 419.160] (II) config/udev: Adding input device HDA Intel PCH Front Mic
(/dev/input/event11)
[ 419.160] (II) No input driver specified, ignoring this device.
[ 419.160] (II) This device may have been added with another device file.
[ 419.160] (II) config/udev: Adding input device HDA Intel PCH Rear Mic
(/dev/input/event12)
[ 419.160] (II) No input driver specified, ignoring this device.
[ 419.160] (II) This device may have been added with another device file.
[ 419.160] (II) config/udev: Adding input device HDA Intel PCH Line
(/dev/input/event13)
[ 419.160] (II) No input driver specified, ignoring this device.
[ 419.160] (II) This device may have been added with another device file.
[ 419.161] (II) config/udev: Adding input device HDA Intel PCH Line Out
(/dev/input/event14)
[ 419.161] (II) No input driver specified, ignoring this device.
[ 419.161] (II) This device may have been added with another device file.
[ 419.161] (II) config/udev: Adding input device HDA Intel PCH Front
Headphone (/dev/input/event15)
[ 419.161] (II) No input driver specified, ignoring this device.
[ 419.161] (II) This device may have been added with another device file.
[ 419.161] (II) config/udev: Adding input device Eee PC WMI hotkeys
(/dev/input/event10)
[ 419.161] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard
catchall"
[ 419.161] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 419.162] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 33
paused 0
[ 419.162] (**) Eee PC WMI hotkeys: always reports core events
[ 419.162] (**) Option "Device" "/dev/input/event10"
[ 419.162] (**) Option "_source" "server/udev"
[ 419.163] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 419.163] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[ 419.163] (II) event10 - Eee PC WMI hotkeys: device removed
[ 419.163] (**) Option "config_info"
"udev:/sys/devices/platform/eeepc-wmi/input/input11/event10"
[ 419.163] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys"
(type: KEYBOARD, id 17)
[ 419.163] (**) Option "xkb_model" "pc105"
[ 419.163] (**) Option "xkb_layout" "gb"
[ 419.164] (II) event10 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 419.164] (II) event10 - Eee PC WMI hotkeys: device is a keyboard
[ 419.165] (II) config/udev: Adding input device PC Speaker
(/dev/input/event9)
[ 419.165] (II) No input driver specified, ignoring this device.
[ 419.165] (II) This device may have been added with another device file.
[ 419.168] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: Applying InputClass "libinput keyboard catchall"
[ 419.168] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control'
[ 419.168] (II) systemd-logind: returning pre-existing fd for
/dev/input/event6 13:70
[ 419.168] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: always reports core events
[ 419.168] (**) Option "Device" "/dev/input/event6"
[ 419.168] (**) Option "_source" "_driver/libinput"
[ 419.168] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: is a virtual subdevice
[ 419.168] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:07B2.0003/input/input6/event6"
[ 419.168] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control" (type: KEYBOARD, id 18)
[ 419.168] (**) Option "xkb_model" "pc105"
[ 419.168] (**) Option "xkb_layout" "gb"
[ 419.168] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: Applying InputClass "libinput keyboard catchall"
[ 419.168] (II) Using input driver 'libinput' for 'Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control'
[ 419.168] (II) systemd-logind: returning pre-existing fd for
/dev/input/event7 13:71
[ 419.168] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer
Control: always reports core events
[ 419.168] (**) Option "Device" "/dev/input/event7"
[ 419.168] (**) Option "_source" "_driver/libinput"
[ 419.168] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: is a virtual subdevice
[ 419.168] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:07B2.0004/input/input7/event7"
[ 419.168] (II) XINPUT: Adding extended input device "Microsoft Microsoft®
2.4GHz Transceiver v8.0 Consumer Control" (type: KEYBOARD, id 19)
[ 419.168] (**) Option "xkb_model" "pc105"
[ 419.168] (**) Option "xkb_layout" "gb"
[ 419.179] (EE) modeset(0): failed to set mode: Invalid argument
[ 427.908] (**) Option "fd" "20"
[ 427.908] (II) event1 - Power Button: device removed
[ 427.908] (**) Option "fd" "23"
[ 427.908] (II) event2 - Video Bus: device removed
[ 427.908] (**) Option "fd" "24"
[ 427.908] (II) event0 - Power Button: device removed
[ 427.909] (**) Option "fd" "25"
[ 427.909] (II) event20 - Microsoft® LifeCam HD-5000: Mi: device removed
[ 427.909] (**) Option "fd" "26"
[ 427.909] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v8.0:
device removed
[ 427.909] (**) Option "fd" "27"
[ 427.909] (II) event5 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse:
device removed
[ 427.909] (**) Option "fd" "28"
[ 427.909] (**) Option "fd" "29"
[ 427.909] (**) Option "fd" "30"
[ 427.909] (II) event8 - Microsoft Microsoft® 2.4GHz Transceiver v8.0 System
Control: device removed
[ 427.910] (**) Option "fd" "31"
[ 427.910] (II) event19 - USB Optical Mouse: device removed
[ 427.910] (**) Option "fd" "32"
[ 427.910] (II) event3 - Logitech Logitech USB Headset: device removed
[ 427.910] (**) Option "fd" "33"
[ 427.910] (II) event10 - Eee PC WMI hotkeys: device removed
[ 427.910] (**) Option "fd" "28"
[ 427.910] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device removed
[ 427.910] (**) Option "fd" "29"
[ 427.910] (II) event7 - Microsoft Microsoft® 2.4GHz Transceiver v8.0
Consumer Control: device removed
[ 427.910] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 427.967] (II) systemd-logind: got pause for 13:69
[ 427.967] (II) systemd-logind: got pause for 13:71
[ 427.967] (II) systemd-logind: got pause for 13:84
[ 427.967] (II) systemd-logind: got pause for 13:65
[ 427.967] (II) systemd-logind: got pause for 13:66
[ 427.967] (II) systemd-logind: got pause for 13:68
[ 427.967] (II) systemd-logind: got pause for 13:70
[ 427.967] (II) systemd-logind: got pause for 13:72
[ 427.967] (II) systemd-logind: got pause for 13:64
[ 427.967] (II) systemd-logind: got pause for 13:83
[ 427.967] (II) systemd-logind: got pause for 226:0
[ 427.967] (II) systemd-logind: got pause for 13:74
[ 427.967] (II) systemd-logind: got pause for 13:67
[ 436.183] (II) systemd-logind: got resume for 13:69
[ 436.199] (II) systemd-logind: got resume for 13:71
[ 436.215] (II) systemd-logind: got resume for 13:84
[ 436.231] (II) systemd-logind: got resume for 13:65
[ 436.255] (II) systemd-logind: got resume for 13:66
[ 436.271] (II) systemd-logind: got resume for 13:68
[ 436.287] (II) systemd-logind: got resume for 13:70
[ 436.303] (II) systemd-logind: got resume for 13:72
[ 436.319] (II) systemd-logind: got resume for 13:64
[ 436.343] (II) systemd-logind: got resume for 13:83
[ 436.343] (II) systemd-logind: got resume for 226:0
[ 436.343] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 436.358] (EE) modeset(0): failed to set mode: Invalid argument
[ 436.358] (EE)
Fatal server error:
[ 436.358] (EE) EnterVT failed for screen 0
[ 436.358] (EE)
[ 436.358] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 436.358] (EE) Please also check the log file at
"/home/alex/.local/share/xorg/Xorg.1.log" for additional information.
[ 436.358] (EE)
[ 436.358] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 436.385] (EE) Server terminated with error (1). Closing log file.
Reverting to :
Linux zen 4.19.0-2-amd64 #1 SMP Debian 4.19.16-1 (2019-01-17) x86_64 GNU/Linux
restored working X.
--
Alex Bennée
