Package: src:linux Version: 4.19.37-5 Severity: wishlist Dear Maintainer,
Raspberry Pi3, from which I write this bugreport, is a popular SoC that finally got a proper support by Debian project. It would be nice to have a kernel module for the camera host interface, which is included into Debian's kernel source tree, but is currently disabled. Tainted status of the current kernel comes from self-built bcm2835_v4l2. Sincerely yours, Reco -- Package-specific info: ** Version: Linux version 4.19.0-5-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-5 (2019-06-19) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-arm64 root=/dev/mapper/pi2-root ro quiet ** Tainted: COE (13312) * Module from drivers/staging has been loaded. * Out-of-tree module has been loaded. * Unsigned module has been loaded. ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3 ** Loaded modules: dm_snapshot dm_bufio cbc cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs lockd grace fscache nls_ascii nls_cp437 vfat fat 8021q garp mrp stp llc ip6_tables ip6t_REJECT nf_reject_ipv6 xt_mac nft_counter ipt_REJECT nf_reject_ipv4 xt_hashlimit xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c xt_comment nft_compat nf_tables nfnetlink btsdio bluetooth drbg ansi_cprng microchip ecdh_generic brcmfmac lan78xx brcmutil of_mdio cfg80211 fixed_phy libphy rfkill bcm2835_thermal bcm2835_rng rng_core efi_pstore bcm2835_wdt leds_gpio efivars bcm2835_v4l2(OE) vchiq(C) v4l2_common videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common auth_rpcgss videodev sunrpc media efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb aes_arm64 dm_mod dwc2 udc_core usbcore sdhci_iproc sdhci_pltfm sdhci usb_common bcm2835 phy_generic fixed ** PCI devices: not available ** USB devices: Bus 001 Device 004: ID 0424:7800 Standard Microsystems Corp. Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 10.0 APT prefers stable APT policy: (500, 'stable') Architecture: arm64 (aarch64) Kernel: Linux 4.19.0-5-arm64 (SMP w/4 CPU cores) Kernel taint flags: TAINT_CRAP, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-4.19.0-5-arm64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.133 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-4.19.0-5-arm64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 Versions of packages linux-image-4.19.0-5-arm64 suggests: pn debian-kernel-handbook <none> pn linux-doc-4.19 <none> Versions of packages linux-image-4.19.0-5-arm64 is related to: pn firmware-amd-graphics <none> pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux-nonfree <none> pn firmware-misc-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
