Package: src:linux
Version: 4.19.67-2+deb10u2
Severity: important
Dear Maintainer,
Installing NVMe SSD on Asus UX430UA laptop (SSD is ADATA ZPG SX8200 Pro). Goal
was dual boot Windows 10 (already on drive) and Debian
10. Neither Debian 10 installer nor Deb 10.2 Live USB key
could detect NVMe drive. lsblk did not show drive, no /dev/nvme* files were
present. Drive works on Windows on same machine, and
works on Debian 9 on my desktop machine.
dmesg showed error nvme 0000:03:00.0: Refused to change power state, currently
in D3
/dev/disk/by-id and /dev/disk/by-type had links for the partitions on the NVMe
drive - correct number of partitions, but broken links
to /dev/nvme* files that didn't exist.
Added this line to startup in GRUB: nvme_core.default_ps_max_latency_us=0 (also
tried 5500, which worked)
That seems to have solved the problem, though I imagine that is at the cost of
proper power management.
As I mentioned, this drive worked on my desktop Deb 9 and on Windows on the
same laptop. Ideally, it would work without having to
disable APST so that Debian 10 can run without the extra power drain.
Thanks
-- Package-specific info:
** Version:
Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64
root=UUID=5a3fe95c-c293-4153-9685-6d090c4f29b8 ro
nvme_core.default_ps_max_latency_us=5500 quiet
** Not tainted
** Kernel log:
[ 7.462791] kauditd_printk_skb: 5 callbacks suppressed
[ 7.462793] audit: type=1400 audit(1574017435.750:16): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=490
comm="apparmor_parser"
[ 7.463199] audit: type=1400 audit(1574017435.750:17): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince//sanitized_helper" pid=490 comm="apparmor_parser"
[ 7.464208] audit: type=1400 audit(1574017435.750:18): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer"
pid=490 comm="apparmor_parser"
[ 7.464463] audit: type=1400 audit(1574017435.750:19): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince-previewer//sanitized_helper" pid=490
comm="apparmor_parser"
[ 7.464971] audit: type=1400 audit(1574017435.750:20): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/bin/evince-thumbnailer" pid=490 comm="apparmor_parser"
[ 9.954030] audit: type=1400 audit(1574017438.242:21): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice"
pid=466 comm="apparmor_parser"
[ 9.954736] audit: type=1400 audit(1574017438.242:22): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg"
pid=466 comm="apparmor_parser"
[ 10.046272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.046274] Bluetooth: BNEP filters: protocol multicast
[ 10.046278] Bluetooth: BNEP socket layer initialized
[ 10.282108] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.541054] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.822616] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.904097] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.033151] fuse init (API version 7.27)
[ 14.340048] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 15.062746] wlp2s0: authenticate with 00:26:5a:d0:55:bc
[ 15.072080] wlp2s0: send auth to 00:26:5a:d0:55:bc (try 1/3)
[ 15.078665] wlp2s0: authenticated
[ 15.081387] wlp2s0: associate with 00:26:5a:d0:55:bc (try 1/3)
[ 15.085349] wlp2s0: RX AssocResp from 00:26:5a:d0:55:bc (capab=0x431
status=0 aid=2)
[ 15.089785] wlp2s0: associated
[ 15.163549] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 22.383573] Bluetooth: RFCOMM TTY layer initialized
[ 22.384011] Bluetooth: RFCOMM socket layer initialized
[ 22.384016] Bluetooth: RFCOMM ver 1.11
[ 161.405575] PM: suspend entry (deep)
[ 161.405577] PM: Syncing filesystems ... done.
[ 161.407478] (NULL device *): firmware: direct-loading firmware
iwlwifi-8000C-36.ucode
[ 161.407524] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 161.408999] OOM killer disabled.
[ 161.409000] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 161.410162] Suspending console(s) (use no_console_suspend to debug)
[ 161.410518] wlp2s0: deauthenticating from 00:26:5a:d0:55:bc by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 161.727163] ACPI: EC: interrupt blocked
[ 161.782211] ACPI: Preparing to enter system sleep state S3
[ 161.786436] ACPI: EC: event blocked
[ 161.786438] ACPI: EC: EC stopped
[ 161.786440] PM: Saving platform NVS memory
[ 161.786537] Disabling non-boot CPUs ...
[ 161.802787] smpboot: CPU 1 is now offline
[ 161.828298] smpboot: CPU 2 is now offline
[ 161.850681] smpboot: CPU 3 is now offline
[18446744066.632380] [Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -19003746.
Restoring
[ 161.857957] ACPI: Low-level resume complete
[ 161.858044] ACPI: EC: EC started
[ 161.858044] PM: Restoring platform NVS memory
[ 161.858740] Enabling non-boot CPUs ...
[ 161.858774] x86: Booting SMP configuration:
[ 161.858775] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 161.859262] cache: parent cpu1 should not be sleeping
[ 161.859448] CPU1 is up
[ 161.859467] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 161.859960] cache: parent cpu2 should not be sleeping
[ 161.860329] CPU2 is up
[ 161.860351] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 161.860812] cache: parent cpu3 should not be sleeping
[ 161.860992] CPU3 is up
[ 161.864526] ACPI: Waking up from system sleep state S3
[ 161.874255] ACPI: EC: interrupt unblocked
[ 161.931888] ACPI: EC: event unblocked
[ 161.933542] ACPI: button: The lid device is not compliant to SW_LID.
[ 162.177383] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[ 162.453506] usb 1-9: reset full-speed USB device number 4 using xhci_hcd
[ 162.605510] acpi LNXPOWER:13: Turning OFF
[ 162.605663] acpi LNXPOWER:12: Turning OFF
[ 162.605809] acpi LNXPOWER:11: Turning OFF
[ 162.605956] acpi LNXPOWER:10: Turning OFF
[ 162.606101] acpi LNXPOWER:0f: Turning OFF
[ 162.606246] acpi LNXPOWER:0e: Turning OFF
[ 162.606391] acpi LNXPOWER:0d: Turning OFF
[ 162.606536] acpi LNXPOWER:0c: Turning OFF
[ 162.606680] acpi LNXPOWER:0b: Turning OFF
[ 162.606825] acpi LNXPOWER:0a: Turning OFF
[ 162.606969] acpi LNXPOWER:09: Turning OFF
[ 162.607114] acpi LNXPOWER:08: Turning OFF
[ 162.607258] acpi LNXPOWER:07: Turning OFF
[ 162.607403] acpi LNXPOWER:06: Turning OFF
[ 162.607547] acpi LNXPOWER:05: Turning OFF
[ 162.607692] acpi LNXPOWER:04: Turning OFF
[ 162.607836] acpi LNXPOWER:03: Turning OFF
[ 162.607980] acpi LNXPOWER:02: Turning OFF
[ 162.608125] acpi LNXPOWER:01: Turning OFF
[ 162.608268] acpi LNXPOWER:00: Turning OFF
[ 162.608365] OOM killer enabled.
[ 162.608366] Restarting tasks ... done.
[ 162.638570] PM: suspend exit
[ 162.715192] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 162.721470] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 162.733095] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 162.976970] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 166.434985] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 167.391629] wlp2s0: authenticate with 00:26:5a:d0:55:bc
[ 167.400476] wlp2s0: send auth to 00:26:5a:d0:55:bc (try 1/3)
[ 167.407839] wlp2s0: authenticated
[ 167.409434] wlp2s0: associate with 00:26:5a:d0:55:bc (try 1/3)
[ 167.415719] wlp2s0: RX AssocResp from 00:26:5a:d0:55:bc (capab=0x431
status=0 aid=2)
[ 167.419555] wlp2s0: associated
[ 167.444773] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: UX430UA
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: UX430UA.307
board_vendor: ASUSTeK COMPUTER INC.
board_name: UX430UA
board_version: 1.0
** Loaded modules:
rfcomm
ctr
ccm
fuse
cmac
bnep
arc4
nls_ascii
nls_cp437
snd_hda_codec_hdmi
vfat
intel_rapl
fat
snd_soc_skl
snd_soc_skl_ipc
x86_pkg_temp_thermal
intel_powerclamp
snd_hda_codec_realtek
snd_soc_sst_ipc
coretemp
btusb
btrtl
btbcm
btintel
snd_soc_sst_dsp
snd_hda_ext_core
snd_soc_acpi_intel_match
iwlmvm
snd_soc_acpi
kvm_intel
bluetooth
snd_hda_codec_generic
snd_soc_core
kvm
snd_compress
irqbypass
mac80211
joydev
uvcvideo
snd_hda_intel
videobuf2_vmalloc
videobuf2_memops
crct10dif_pclmul
crc32_pclmul
videobuf2_v4l2
snd_hda_codec
videobuf2_common
drbg
iwlwifi
videodev
snd_hda_core
ghash_clmulni_intel
intel_cstate
asus_nb_wmi
snd_hwdep
intel_uncore
asus_wmi
efi_pstore
ansi_cprng
sparse_keymap
wmi_bmof
serio_raw
intel_rapl_perf
hid_multitouch
cfg80211
media
snd_pcm
ecdh_generic
snd_timer
mei_me
snd
iTCO_wdt
iTCO_vendor_support
efivars
pcspkr
rfkill
idma64
soundcore
mei
processor_thermal_device
intel_soc_dts_iosf
intel_pch_thermal
battery
pcc_cpufreq
int3403_thermal
ac
int340x_thermal_zone
tpm_crb
acpi_als
tpm_tis
tpm_tis_core
kfifo_buf
tpm
industrialio
rng_core
evdev
asus_wireless
int3400_thermal
acpi_thermal_rel
acpi_pad
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
hid_generic
i915
crc32c_intel
i2c_algo_bit
xhci_pci
drm_kms_helper
xhci_hcd
aesni_intel
aes_x86_64
drm
crypto_simd
cryptd
glue_helper
usbcore
i2c_i801
wmi
nvme
nvme_core
i2c_hid
hid
thermal
intel_lpss_pci
usb_common
intel_lpss
video
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether cc:2f:71:5a:1d:e2 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.137/24 brd 192.168.2.255 scope global dynamic noprefixroute
wlp2s0
valid_lft 83954sec preferred_lft 83954sec
inet6 fe80::ce2f:71ff:fe5a:1de2/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlp2s0: 79564 295 0 0 0 0 0 0 43221
287 0 0 0 0 0 0
lo: 552 12 0 0 0 0 0 0 552
12 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core
Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v6/7th Gen Core Processor
Host Bridge/DRAM Registers [1043:1740]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 620
[8086:5916] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. HD Graphics 620 [1043:1740]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake
Processor Thermal Subsystem [8086:1903] (rev 02)
Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v5/E3-1500 v5/6th Gen
Core Processor Thermal Subsystem [1043:1740]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ef220000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP USB 3.0 xHCI
Controller [8086:9d2f] (rev 21) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP USB 3.0 xHCI
Controller [1043:201f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
Region 0: Memory at ef210000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP
Thermal subsystem [8086:9d31] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Thermal subsystem
[1043:1740]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ef234000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP
Serial IO I2C Controller #0 [8086:9d60] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C
Controller [1043:1740]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ef233000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller [1180]: Intel Corporation Sunrise Point-LP
Serial IO I2C Controller #1 [8086:9d61] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C
Controller [1043:1740]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ef232000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel-lpss
Kernel modules: intel_lpss_pci
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-LP
CSME HECI #1 [8086:9d3a] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP CSME HECI [1043:1740]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 125
Region 0: Memory at ef231000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root
Port [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: a0000000-a01fffff
Prefetchable memory behind bridge: 00000000a0200000-00000000a03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root
Port #6 [8086:9d15] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 123
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ef100000-ef1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root
Port #9 [8086:9d18] (rev f1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ef000000-ef0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC Controller
[8086:9d58] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP LPC Controller
[1043:1740]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-LP PMC
[8086:9d21] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP PMC [1043:1740]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at ef22c000 (32-bit, non-prefetchable) [disabled]
[size=16K]
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD Audio
[8086:9d71] (rev 21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP HD Audio [1043:1740]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 129
Region 0: Memory at ef228000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at ef200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel, snd_soc_skl
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus [8086:9d23] (rev
21)
Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SMBus [1043:1740]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ef230000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
02:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3]
(rev 3a)
Subsystem: Intel Corporation Wireless 8260 [8086:0110]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 133
Region 0: Memory at ef100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Non-Volatile memory controller [0108]: Device [1cc1:8201] (rev 03)
(prog-if 02 [NVM Express])
Subsystem: Device [1cc1:8201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at ef000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 04f3:0903 Elan Microelectronics Corp.
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 13d3:5694 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-6-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8),
LANGUAGE=en_CA:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-6-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-6-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-6-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-6-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20190114-2
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
