Package: src:linux Version: 5.3.9-3 Severity: normal Dear Maintainer,
I have a Lenovo Ideapad 530s with an AMD ryzen cpu. This has been running fine under Debian, since I first bought the computer, although the touchpad does not work after boot. I found a very simple remedy for this using the https://github.com/Syniurge/i2c-amd-mp2 driver, which is supplied as a DKMS build, and simply installed and worked. When I apt upgraded my machine at the start of this week, and moved to a 5.3 series debian kernel, the DKMS build stopped working, and after boot I was surprised to have no trackpad again. I looked at the build problem with the module, and it was a very simple problem, where the prototype for one of the functions from device.h has become slightly more strict. When I submitted this change to the upstream repo, the reply from the author is that the module should be merged into the upstream kernel since releasae 5.2 and a separated build should not be necessary for kernels > 5.1. They report that the debian kernel seems to be exluding this module, but they don't know why. ( see https://github.com/Syniurge/i2c-amd-mp2/pull/14 ) Is there a reason this is not available in the debian kernel image? Do I need to install additional packages, or perhaps make such a package myself. Thanks cms -- Package-specific info: ** Version: Linux version 5.3.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 SMP Debian 5.3.9-3 (2019-11-19) ** Command line: BOOT_IMAGE=/vmlinuz-5.3.0-2-amd64 root=/dev/mapper/blink--vg-root ro quiet ** Tainted: OE (12288) * Out-of-tree module has been loaded. * Unsigned module has been loaded. ** Kernel log: (Note that use of the override may cause unknown side effects.) [ 17.594132] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 17.596964] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 17.622248] mc: Linux media interface: v0.10 [ 17.622285] EDAC amd64: Node 0: DRAM ECC disabled. [ 17.622289] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.644207] videodev: Linux video capture interface: v2.00 [ 17.672957] ath: EEPROM regdomain: 0x6c [ 17.672960] ath: EEPROM indicates we should expect a direct regpair map [ 17.672963] ath: Country alpha2 being used: 00 [ 17.672964] ath: Regpair used: 0x6c [ 17.677797] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0 [ 17.688653] EDAC amd64: Node 0: DRAM ECC disabled. [ 17.688655] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.698121] Bluetooth: Core ver 2.22 [ 17.698153] NET: Registered protocol family 31 [ 17.698154] Bluetooth: HCI device and connection manager initialized [ 17.698330] Bluetooth: HCI socket layer initialized [ 17.698333] Bluetooth: L2CAP socket layer initialized [ 17.698338] Bluetooth: SCO socket layer initialized [ 17.712914] usbcore: registered new interface driver btusb [ 17.765968] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b61e) [ 17.782522] uvcvideo 3-2:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized! [ 17.782525] uvcvideo 3-2:1.0: Entity type for entity Extension 4 was not initialized! [ 17.782526] uvcvideo 3-2:1.0: Entity type for entity Processing 2 was not initialized! [ 17.782528] uvcvideo 3-2:1.0: Entity type for entity Camera 1 was not initialized! [ 17.782785] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-2/3-2:1.0/input/input18 [ 17.783339] usbcore: registered new interface driver uvcvideo [ 17.783341] USB Video Class driver (1.1.1) [ 17.904204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.904207] Bluetooth: BNEP filters: protocol multicast [ 17.904214] Bluetooth: BNEP socket layer initialized [ 18.761123] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536 [ 18.895397] pcieport 0000:00:01.2: AER: Multiple Corrected error received: 0000:00:01.0 [ 18.895410] pcieport 0000:00:01.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 18.896225] pcieport 0000:00:01.2: AER: device [1022:15d3] error status/mask=00000080/00006000 [ 18.897225] pcieport 0000:00:01.2: AER: [ 7] BadDLLP [ 18.929438] pcieport 0000:00:01.2: AER: Multiple Corrected error received: 0000:00:01.0 [ 18.929452] pcieport 0000:00:01.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) [ 18.931291] pcieport 0000:00:01.2: AER: device [1022:15d3] error status/mask=00000040/00006000 [ 18.933110] pcieport 0000:00:01.2: AER: [ 6] BadTLP [ 19.133043] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536 [ 20.447946] Bluetooth: RFCOMM TTY layer initialized [ 20.447965] Bluetooth: RFCOMM socket layer initialized [ 20.447980] Bluetooth: RFCOMM ver 1.11 [ 20.826773] new mount options do not match the existing superblock, will be ignored [ 20.849360] fuse: init (API version 7.31) [ 21.652617] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 22.208100] lxdbr0: port 1(veth3be9edce) entered blocking state [ 22.208103] lxdbr0: port 1(veth3be9edce) entered disabled state [ 22.208254] device veth3be9edce entered promiscuous mode [ 22.208340] lxdbr0: port 1(veth3be9edce) entered blocking state [ 22.208342] lxdbr0: port 1(veth3be9edce) entered forwarding state [ 22.208511] lxdbr0: port 1(veth3be9edce) entered disabled state [ 22.357626] eth0: renamed from veth04f864ba [ 22.404699] IPv6: ADDRCONF(NETDEV_CHANGE): veth3be9edce: link becomes ready [ 22.404779] lxdbr0: port 1(veth3be9edce) entered blocking state [ 22.404782] lxdbr0: port 1(veth3be9edce) entered forwarding state [ 22.404999] IPv6: ADDRCONF(NETDEV_CHANGE): lxdbr0: link becomes ready [ 22.465509] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 22.515086] lxdbr0: port 2(veth8f98473f) entered blocking state [ 22.515090] lxdbr0: port 2(veth8f98473f) entered disabled state [ 22.515328] device veth8f98473f entered promiscuous mode [ 22.515415] lxdbr0: port 2(veth8f98473f) entered blocking state [ 22.515417] lxdbr0: port 2(veth8f98473f) entered forwarding state [ 22.614926] kauditd_printk_skb: 34 callbacks suppressed [ 22.614930] audit: type=1400 audit(1575138895.397:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-pconch-builder_</var/snap/lxd/common/lxd>" pid=1582 comm="apparmor_parser" [ 22.666454] lxdbr0: port 2(veth8f98473f) entered disabled state [ 22.669752] eth0: renamed from vethd6e4c171 [ 22.692077] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.692140] IPv6: ADDRCONF(NETDEV_CHANGE): veth8f98473f: link becomes ready [ 22.692228] lxdbr0: port 2(veth8f98473f) entered blocking state [ 22.692230] lxdbr0: port 2(veth8f98473f) entered forwarding state [ 22.815817] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 23.094661] rfkill: input handler disabled [ 29.024399] wlp1s0: authenticate with dc:39:6f:1b:be:b2 [ 29.052976] wlp1s0: send auth to dc:39:6f:1b:be:b2 (try 1/3) [ 29.054838] wlp1s0: authenticated [ 29.055571] wlp1s0: associate with dc:39:6f:1b:be:b2 (try 1/3) [ 29.057995] wlp1s0: RX AssocResp from dc:39:6f:1b:be:b2 (capab=0x1511 status=0 aid=4) [ 29.060567] wlp1s0: associated [ 29.071980] ath: EEPROM regdomain: 0x8114 [ 29.071983] ath: EEPROM indicates we should expect a country code [ 29.071983] ath: doing EEPROM country->regdmn map search [ 29.071984] ath: country maps to regdmn code: 0x37 [ 29.071986] ath: Country alpha2 being used: DE [ 29.071986] ath: Regpair used: 0x37 [ 29.071989] ath: regdomain 0x8114 dynamically updated by country element [ 29.127215] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 29.147174] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by dc:39:6f:1b:be:b2 [ 31.012274] rfkill: input handler enabled [ 33.949448] rfkill: input handler disabled [ 50.069145] pcieport 0000:00:01.2: AER: Corrected error received: 0000:00:01.0 [ 50.069156] pcieport 0000:00:01.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 50.069161] pcieport 0000:00:01.2: AER: device [1022:15d3] error status/mask=00001000/00006000 [ 50.069163] pcieport 0000:00:01.2: AER: [12] Timeout ** Model information sys_vendor: LENOVO product_name: 81H1 product_version: Lenovo ideapad 530S-14ARR chassis_vendor: LENOVO chassis_version: Lenovo ideapad 530S-14ARR bios_vendor: LENOVO bios_version: 8PCN45WW board_vendor: LENOVO board_name: LNVNB161216 board_version: SDK0J40709 WIN ** Loaded modules: ctr ccm veth ip6table_nat ip6table_filter ip6_tables xt_MASQUERADE xt_CHECKSUM xt_comment xt_tcpudp iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter bridge stp llc fuse rfcomm cpufreq_userspace cmac cpufreq_powersave cpufreq_conservative bnep uvcvideo btusb btrtl videobuf2_vmalloc btbcm videobuf2_memops btintel videobuf2_v4l2 videobuf2_common bluetooth videodev mc drbg ansi_cprng ecdh_generic ecc joydev binfmt_misc hid_multitouch edac_mce_amd hid_generic nls_ascii nls_cp437 vfat fat kvm_amd ccp rng_core kvm ath10k_pci ext4 snd_hda_codec_realtek irqbypass ath10k_core i2c_hid snd_hda_codec_generic crc16 hid mbcache snd_hda_codec_hdmi ledtrig_audio jbd2 ath crct10dif_pclmul crc32_pclmul snd_hda_intel efi_pstore mac80211 xhci_pci crc32c_generic snd_hda_codec xhci_hcd snd_hda_core ghash_clmulni_intel snd_hwdep pcspkr cfg80211 snd_pcm efivars usbcore snd_timer wmi_bmof snd sp5100_tco watchdog ideapad_laptop(OE) k10temp sparse_keymap i2c_piix4 usb_common libarc4 soundcore rfkill battery i2c_designware_platform i2c_designware_core ac i2c_amd_mp2(OE) acpi_cpufreq squashfs loop parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 btrfs libcrc32c xor zstd_decompress zstd_compress raid6_pq dm_crypt dm_mod amdgpu crc32c_intel mfd_core gpu_sched i2c_algo_bit ttm aesni_intel drm_kms_helper aes_x86_64 glue_helper crypto_simd cryptd drm evdev serio_raw nvme nvme_core wmi video button ** Network interface configuration: *** /etc/network/interfaces: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:f4:8d:e9:90:f9 brd ff:ff:ff:ff:ff:ff inet 10.0.1.97/16 brd 10.0.255.255 scope global dynamic noprefixroute wlp1s0 valid_lft 863162sec preferred_lft 863162sec inet6 fe80::2f4:8dff:fee9:90f9/64 scope link noprefixroute valid_lft forever preferred_lft forever 3: lxdbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 76:83:51:49:7c:d6 brd ff:ff:ff:ff:ff:ff inet 10.116.37.1/24 scope global lxdbr0 valid_lft forever preferred_lft forever inet6 fd42:2c0f:d0e5:984e::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::7483:51ff:fe49:7cd6/64 scope link valid_lft forever preferred_lft forever 5: veth3be9edce@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master lxdbr0 state UP group default qlen 1000 link/ether fa:96:d8:92:83:f9 brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet6 fe80::f896:d8ff:fe92:83f9/64 scope link valid_lft forever preferred_lft forever 7: veth8f98473f@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master lxdbr0 state UP group default qlen 1000 link/ether 6a:af:4d:29:ff:8f brd ff:ff:ff:ff:ff:ff link-netnsid 1 inet6 fe80::68af:4dff:fe29:ff8f/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed veth3be9edce: 3192 33 0 0 0 0 0 0 23457 175 0 0 0 0 0 0 wlp1s0: 9068524 11735 0 822 0 0 0 0 1005331 7169 0 0 0 0 0 0 lxdbr0: 6306 80 0 0 0 0 0 0 16440 126 0 0 0 0 0 0 veth8f98473f: 4234 47 0 0 0 0 0 0 22873 179 0 0 0 0 0 0 lo: 877909 1865 0 0 0 0 0 0 877909 1865 0 0 0 0 0 0 ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Root Complex [1022:15d0] Subsystem: Lenovo Raven/Raven2 Root Complex [17aa:380a] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 IOMMU [1022:15d1] Subsystem: Lenovo Raven/Raven2 IOMMU [17aa:3809] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 25 Capabilities: <access denied> 00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 26 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: None Memory behind bridge: e0200000-e03fffff [size=2M] Prefetchable memory behind bridge: None Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:01.7 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 PCIe GPP Bridge [6:0] [1022:15d3] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 27 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: None Memory behind bridge: e0900000-e09fffff [size=1M] Prefetchable memory behind bridge: None Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge [1022:1452] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A [1022:15db] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff [size=4K] Memory behind bridge: e0400000-e08fffff [size=5M] Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff [size=258M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 61) Subsystem: Lenovo FCH SMBus Controller [17aa:3818] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus Kernel modules: i2c_piix4, sp5100_tco 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51) Subsystem: Lenovo FCH LPC Bridge [17aa:3819] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 0 [1022:15e8] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 1 [1022:15e9] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 2 [1022:15ea] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 3 [1022:15eb] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k10temp Kernel modules: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 4 [1022:15ec] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 5 [1022:15ed] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 6 [1022:15ee] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2 Device 24: Function 7 [1022:15ef] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31) Subsystem: Lenovo QCA9377 802.11ac Wireless Network Adapter [17aa:0901] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 72 Region 0: Memory at e0200000 (64-bit, non-prefetchable) [size=2M] Capabilities: <access denied> Kernel driver in use: ath10k_pci Kernel modules: ath10k_pci 02:00.0 Non-Volatile memory controller [0108]: SK hynix Device [1c5c:1327] (prog-if 02 [NVM Express]) Subsystem: SK hynix Device [1c5c:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 NUMA node: 0 Region 0: Memory at e0900000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: nvme Kernel modules: nvme 03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c4) (prog-if 00 [VGA controller]) DeviceName: Broadcom 5762 Subsystem: Lenovo Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [17aa:39fe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=2M] Region 4: I/O ports at 1000 [size=256] Region 5: Memory at e0800000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu 03:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller [1002:15de] Subsystem: Lenovo Raven/Raven2/Fenghuang HDMI/DP Audio Controller [17aa:3803] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 68 Region 0: Memory at e08c8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 03:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df] Subsystem: Lenovo Family 17h (Models 10h-1fh) Platform Security Processor [17aa:3804] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 255 Region 2: Memory at e0700000 (32-bit, non-prefetchable) [size=1M] Region 5: Memory at e08ce000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> 03:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:15e0] (prog-if 30 [XHCI]) Subsystem: Lenovo Raven USB 3.1 [17aa:3805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 49 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 03:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven USB 3.1 [1022:15e1] (prog-if 30 [XHCI]) Subsystem: Lenovo Raven USB 3.1 [17aa:3806] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 03:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir Audio Processor [1022:15e2] Subsystem: Lenovo Raven/Raven2/FireFlight/Renoir Audio Processor [17aa:380b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 255 Region 0: Memory at e0880000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> 03:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) HD Audio Controller [1022:15e3] Subsystem: Lenovo Family 17h (Models 10h-1fh) HD Audio Controller [17aa:380c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 69 Region 0: Memory at e08c0000 (32-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 03:00.7 Non-VGA unclassified device [0000]: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/Renoir Non-Sensor Fusion Hub KMDF driver [1022:15e6] Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/Renoir Sensor Fusion Hub [1022:15e4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 49 Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=1M] Region 5: Memory at e08cc000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: i2c_amd_mp2 Kernel modules: i2c_amd_mp2 ** USB devices: Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 04f2:b61e Chicony Electronics Co., Ltd Integrated Camera Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 0cf3:e500 Qualcomm Atheros Communications Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.3.0-2-amd64 (SMP w/8 CPU cores) Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.3.0-2-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.135 ii kmod 26-3 ii linux-base 4.6 Versions of packages linux-image-5.3.0-2-amd64 recommends: ii apparmor 2.13.3-7 ii firmware-linux-free 3.4 Versions of packages linux-image-5.3.0-2-amd64 suggests: pn debian-kernel-handbook <none> ii grub-efi-amd64 2.04-4 pn linux-doc-5.3 <none> Versions of packages linux-image-5.3.0-2-amd64 is related to: ii firmware-amd-graphics 20190717-2 ii firmware-atheros 20190717-2 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20190717-2 ii firmware-misc-nonfree 20190717-2 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
