Hi Bjørn, On 09/05/20 at 20:44 +0200, Bjørn Mork wrote: > Please enable CONFIG_PCIE_BRCMSTB on arm64. > > The Raspberry Pi 4 has a VL805 xhci controller connected to the > PCIe bus on the SoC. All USB ports are connected to this controller. > CONFIG_PCIE_BRCMSTB is therefore necessary for USB support.
I am trying to boot a RPI4 with the 5.6 kernel from unstable, but it fails to boot (while it worked with 5.5 from unstable). What I'm seeing with 5.5, but not with 5.6, is: [ 4.500333] mmc1: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 4.500585] mmc0: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.577842] mmc0: new high speed SDIO card at address 0001 [ 4.610694] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 4.618812] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 4.629268] mmcblk1: p1 p2 Did you also see that issue? Was it fixed by enabling CONFIG_PCIE_BRCMSTB, or is that a different issue? Thanks, Lucas
