Your message dated Sat, 24 Apr 2021 23:44:11 -0700 (PDT) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #745635, regarding linux-image-3.2.0-4-amd64: ALC 883 fail to hear sound separate on channels. to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 745635: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=745635 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 3.2.54-2 Severity: normal Content of cat /proc/asound/* cat: /proc/asound/CA0106: Is a directory cat: /proc/asound/card0: Is a directory cat: /proc/asound/card1: Is a directory 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfbff8000 irq 44 1 [CA0106 ]: CA0106 - CA0106 Audigy SE [SB0570] at 0xec00 irq 16 1: : sequencer 2: [ 1- 0]: raw midi 3: [ 1- 3]: digital audio playback 4: [ 1- 3]: digital audio capture 5: [ 1- 2]: digital audio playback 6: [ 1- 2]: digital audio capture 7: [ 1- 1]: digital audio playback 8: [ 1- 1]: digital audio capture 9: [ 1- 0]: digital audio playback 10: [ 1- 0]: digital audio capture 11: [ 1] : control 12: [ 0- 2]: digital audio capture 13: [ 0- 1]: digital audio playback 14: [ 0- 0]: digital audio playback 15: [ 0- 0]: digital audio capture 16: [ 0- 0]: hardware dependent 17: [ 0] : control 33: : timer 00-00: HDA Codec 0 cat: /proc/asound/Intel: Is a directory 0 snd_hda_intel 1 snd_ca0106 cat: /proc/asound/oss: Is a directory 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1 00-01: ALC883 Digital : ALC883 Digital : playback 1 00-02: ALC883 Analog : ALC883 Analog : capture 1 01-00: ca0106 : CA0106 : playback 1 : capture 1 01-01: ca0106 : CA0106 : playback 1 : capture 1 01-02: ca0106 : CA0106 : playback 1 : capture 1 01-03: ca0106 : CA0106 : playback 1 : capture 1 cat: /proc/asound/seq: Is a directory G0: system timer : 4000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE P0-0-1: PCM capture 0-0-1 : SLAVE P0-1-0: PCM playback 0-1-0 : SLAVE P0-2-1: PCM capture 0-2-1 : SLAVE P1-0-0: PCM playback 1-0-0 : SLAVE P1-0-1: PCM capture 1-0-1 : SLAVE P1-1-0: PCM playback 1-1-0 : SLAVE P1-1-1: PCM capture 1-1-1 : SLAVE P1-2-0: PCM playback 1-2-0 : SLAVE P1-2-1: PCM capture 1-2-1 : SLAVE P1-3-0: PCM playback 1-3-0 : SLAVE P1-3-1: PCM capture 1-3-1 : SLAVE Advanced Linux Sound Architecture Driver Version 1.0.24. On alsa modules CA0106 is normal and channels in separate ,and on ALC 883 stereo channels is together on alls channel. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/system-debian_root ro quiet init=/bin/systemd ** Not tainted ** Kernel log: [ 5.036643] fuse init (API version 7.17) [ 5.108544] loop: module loaded [ 6.229142] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 6.229150] ACPI: Power Button [PWRB] [ 6.229217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.229222] ACPI: Power Button [PWRF] [ 6.233124] ACPI: Requesting acpi_cpufreq [ 6.267568] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] [ 6.267572] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.280759] iTCO_vendor_support: vendor-support=0 [ 6.281523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 6.281634] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 6.281710] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.297638] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.457773] coretemp coretemp.0: Using relative temperature scale! [ 6.457790] coretemp coretemp.0: Using relative temperature scale! [ 6.491755] [drm] Initialized drm 1.1.0 20060810 [ 7.086787] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 7.290240] wmi: Mapper loaded [ 7.357175] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 7.357210] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 7.371273] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 7.381948] nouveau 0000:01:00.0: setting latency timer to 64 [ 7.381985] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046f00a3) [ 7.384812] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 7.464859] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 7.464863] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [ 7.464868] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 7.464872] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.43 [ 7.464875] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 7.464878] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [ 7.465020] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 7.465024] [drm] nouveau 0000:01:00.0: DCB version 3.0 [ 7.465027] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00000028 [ 7.465031] [drm] nouveau 0000:01:00.0: DCB outp 01: 02011310 00000028 [ 7.465033] [drm] nouveau 0000:01:00.0: DCB outp 02: 01011312 00000000 [ 7.465036] [drm] nouveau 0000:01:00.0: DCB outp 03: 020223f1 00c0c080 [ 7.465039] [drm] nouveau 0000:01:00.0: DCB conn 00: 0000 [ 7.465041] [drm] nouveau 0000:01:00.0: DCB conn 01: 1130 [ 7.465044] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210 [ 7.465047] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211 [ 7.465049] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213 [ 7.465057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0 [ 7.465110] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F [ 7.480230] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD [ 7.480252] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38 [ 7.481372] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91 [ 7.481553] [TTM] Zone kernel: Available graphics memory: 2030410 kiB [ 7.481557] [TTM] Initializing pool allocator [ 7.481563] [TTM] Initializing DMA pool allocator [ 7.481577] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR2) [ 7.481597] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 7.487899] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 7.488288] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 7.550259] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.550263] [drm] No driver support for vblank timestamp query. [ 7.555306] hda_codec: ALC883: BIOS auto-probing. [ 7.558339] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 7.564168] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 7.872038] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 7.872044] [drm] nouveau 0000:01:00.0: 0: core 550MHz shader 550MHz memory 540MHz fanspeed 100% [ 7.872048] [drm] nouveau 0000:01:00.0: c: core 199MHz memory 391MHz [ 7.873039] [drm] nouveau 0000:01:00.0: 0xD4A7: Parsing digital output script table [ 7.923323] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 7.963631] Adding 2097148k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:2097148k [ 8.028934] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88012742a000 [ 8.029038] fbcon: nouveaufb (fb0) is primary device [ 8.043366] [drm] nouveau 0000:01:00.0: 0xD4A7: Parsing digital output script table [ 8.095697] Console: switching to colour frame buffer device 160x64 [ 8.098065] fb0: nouveaufb frame buffer device [ 8.098068] drm: registered panic notifier [ 8.098080] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 8.294719] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 8.944525] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/dm-2 [ 9.029174] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/dm-2 [ 9.406163] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 9.474977] device fsid 2eeb19db-5a3c-48de-922a-86b1935895aa devid 1 transid 70709 /dev/mapper/system-debian_home [ 9.475285] btrfs: disk space caching is enabled [ 9.820496] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 9.900317] Adding 2047996k swap on /dev/mapper/fedora_192--168--0--152-swap. Priority:-2 extents:1 across:2047996k [ 11.390070] RPC: Registered named UNIX socket transport module. [ 11.390074] RPC: Registered udp transport module. [ 11.390077] RPC: Registered tcp transport module. [ 11.390079] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.498769] FS-Cache: Loaded [ 11.601858] FS-Cache: Netfs 'nfs' registered for caching [ 11.620237] Installing knfsd (copyright (C) 1996 [email protected]). [ 11.843176] atl1 0000:02:00.0: irq 45 for MSI/MSI-X [ 11.843285] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 12.744662] ossctl[1011] trap int3 ip:7f0c102d4c13 sp:7fffd1444b10 error:0 [ 14.705656] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.567327] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 22.840018] eth0: no IPv6 routers present [ 23.009084] 8139too 0000:05:01.0: eth1: link down [ 23.009724] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 27.414603] postgres (1572): /proc/1572/oom_adj is deprecated, please use /proc/1572/oom_score_adj instead. [ 33.712047] eth0: no IPv6 routers present [ 45.988324] ata5.00: configured for UDMA/133 [ 45.988331] ata5: EH complete [ 93.179817] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) ** Model information sys_vendor: System manufacturer product_name: P5K SE product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1402 board_vendor: ASUSTeK Computer INC. board_name: P5K SE board_version: Rev 1.xx ** Loaded modules: ip6table_filter ip6_tables xt_tcpudp iptable_filter binfmt_misc ip_tables x_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc snd_hda_codec_realtek nouveau snd_ca0106 snd_hda_intel snd_hda_codec mxm_wmi wmi snd_ac97_codec video snd_seq_midi snd_seq_midi_event snd_hwdep ttm snd_rawmidi snd_pcm snd_seq evdev snd_page_alloc snd_seq_device drm_kms_helper ac97_bus drm snd_timer coretemp snd power_supply serio_raw pcspkr iTCO_wdt iTCO_vendor_support i2c_i801 acpi_cpufreq mperf processor button soundcore thermal_sys i2c_algo_bit i2c_core asus_atk0110 cuse loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 jbd2 mbcache btrfs crc32c libcrc32c zlib_deflate dm_mod usbhid hid sg sd_mod crc_t10dif 8139too ata_generic 8139cp floppy ata_piix pata_marvell ahci libahci libata uhci_hcd atl1 mii scsi_mod ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fc000000-fe8fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at cc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0400000-f07fffff Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at ac00 [size=4] Region 2: I/O ports at a880 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a480 [size=16] Region 5: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at b880 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at b480 [size=16] Region 5: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:81f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82a2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell 05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007] Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=32] Capabilities: <access denied> Kernel driver in use: snd_ca0106 05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at febe0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 8139too ** USB devices: Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 04ca:0022 Lite-On Technology Corp. Bus 004 Device 002: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button) Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.52 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 16-2 ii linux-base 3.5 ii module-init-tools 16-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
