Your message dated Thu, 06 May 2021 20:15:10 +0200 with message-id <[email protected]> and subject line Closing this bug has caused the Debian Bug report #819161, regarding linux-image-4.4.0-1-amd64: Mutlihead LCD configuration does not work anymore to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 819161: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=819161 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 4.4.6-1 Severity: important After the update of the linux image from 4.3.5-1 to 4.4.6-1 the LCD on the first HDMI output (HDMI1) of graphic card is no more detected: $ xrandr Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 32767 x 32767 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) HDMI2 connected primary 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 59.95*+ 1600x1200 60.00 1280x1024 60.02 1280x960 60.00 1024x768 60.00 800x600 60.32 56.25 640x480 60.00 VGA1 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) I use a Intel chip set: ~$ lspci -s 00:02.0 -v 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 31 Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at bc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 It is not a monitor problem because if a plug the monitor which is usually connected to HDM1 to HDM2 I get the ecpected moniotr image. Booting the same system with linux-image-4.3.0-1-amd64 has no problem and detects the monitors on both HDMI outputs. -- Package-specific info: ** Version: Linux version 4.4.0-1-amd64 ([email protected]) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=UUID=3669a3e1-168c-4d21-9ecb-ed44af9b152b ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 4.842516] scsi 7:0:0:0: Direct-Access ST1000LM 024 HN-M101MBB 2AR1 PQ: 0 ANSI: 5 [ 4.843207] sd 7:0:0:0: Attached scsi generic sg8 type 0 [ 4.849627] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.850249] sd 7:0:0:0: [sdh] Write Protect is off [ 4.850252] sd 7:0:0:0: [sdh] Mode Sense: 23 00 00 00 [ 4.850937] sd 7:0:0:0: [sdh] No Caching mode page found [ 4.850966] sd 7:0:0:0: [sdh] Assuming drive cache: write through [ 5.095185] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 5.118443] systemd-journald[197]: Received request to flush runtime journal from PID 1 [ 5.183992] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 5.183999] ACPI: Power Button [PWRB] [ 5.184058] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 5.184060] ACPI: Power Button [PWRF] [ 5.207737] [drm] Initialized drm 1.1.0 20060810 [ 5.208066] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.228296] sdh: sdh1 sdh2 [ 5.231273] sd 7:0:0:0: [sdh] Attached SCSI disk [ 5.260068] [drm] Memory usable by graphics device = 2048M [ 5.260076] [drm] Replacing VGA console driver [ 5.260791] Console: switching to colour dummy device 80x25 [ 5.261663] ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch [ 5.263681] ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch [ 5.265696] ACPI: \_SB_.PCI0.SBRG.ASOC: Device cannot be configured due to a frequency mismatch [ 5.266033] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.266036] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.266038] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.266040] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.266041] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 5.266043] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.266045] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 5.266047] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 5.266048] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 5.267359] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.267360] [drm] Driver supports precise vblank timestamp query. [ 5.267575] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.271017] [drm:intel_opregion_init [i915]] *ERROR* No ACPI video bus found [ 5.271061] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 5.296890] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254) [ 5.296896] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.296900] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254) [ 5.296903] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.296904] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150930/utaddress-254) [ 5.296907] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.296908] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.334000] random: nonblocking pool is initialized [ 5.339514] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.340467] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.340499] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.340530] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.340561] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.340592] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.340622] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.340653] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 5.340684] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 5.340716] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 5.392353] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20150930/utaddress-254) [ 5.392360] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.409047] Adding 4881404k swap on /dev/sda1. Priority:-1 extents:1 across:4881404k SSFS [ 5.450753] input: PC Speaker as /devices/platform/pcspkr/input/input18 [ 5.522179] iTCO_vendor_support: vendor-support=0 [ 5.523641] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.523677] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 5.524752] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.538510] fbcon: inteldrmfb (fb0) is primary device [ 6.080161] Console: switching to colour frame buffer device 240x75 [ 6.084400] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.199690] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 6.283127] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6.552655] FS-Cache: Loaded [ 6.553450] Key type dns_resolver registered [ 6.564683] FS-Cache: Netfs 'cifs' registered for caching [ 6.564712] Key type cifs.spnego registered [ 6.564721] Key type cifs.idmap registered [ 6.566718] CIFS VFS: Error connecting to socket. Aborting operation. [ 6.566782] CIFS VFS: Error connecting to socket. Aborting operation. [ 6.566992] CIFS VFS: cifs_mount failed w/return code = -101 [ 6.567100] CIFS VFS: cifs_mount failed w/return code = -101 [ 6.567537] CIFS VFS: Error connecting to socket. Aborting operation. [ 6.567596] CIFS VFS: cifs_mount failed w/return code = -101 [ 6.572737] CIFS VFS: Error connecting to socket. Aborting operation. [ 6.572911] CIFS VFS: cifs_mount failed w/return code = -101 [ 7.477983] vboxdrv: Found 2 processor cores [ 7.479134] vboxdrv: fAsync=0 offMin=0x2db offMax=0xe9f [ 7.579545] vboxdrv: TSC mode is Synchronous, tentative frequency 3166305830 Hz [ 7.579549] vboxdrv: Successfully loaded version 5.0.16_Debian (interface 0x00240000) [ 7.587799] VBoxNetFlt: Successfully started. [ 7.745482] VBoxNetAdp: Successfully started. [ 7.775265] VBoxPciLinuxInit [ 7.840067] vboxpci: IOMMU not found (not registered) [ 8.069084] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.077413] r8169 0000:01:00.0 eth0: link down [ 8.077414] r8169 0000:01:00.0 eth0: link down [ 8.077574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.220029] floppy0: no floppy controllers found [ 8.220041] work still pending [ 10.480224] r8169 0000:01:00.0 eth0: link up [ 10.480239] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.924928] usb 9-3: reset SuperSpeed USB device number 7 using xhci_hcd [ 66.949723] fuse init (API version 7.23) [ 367.584026] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 2101 board_vendor: ASUSTeK Computer INC. board_name: P5Q-EM board_version: Rev 1.xx ** Loaded modules: fuse pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) cpufreq_powersave cpufreq_stats cpufreq_conservative vboxdrv(O) cpufreq_userspace nls_utf8 cifs dns_resolver fscache binfmt_misc iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass joydev pcspkr serio_raw evdev i2c_i801 snd_hda_codec_hdmi lpc_ich mfd_core snd_hda_codec_realtek snd_hda_codec_generic i915 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm_oss video snd_mixer_oss snd_pcm drm_kms_helper snd_timer snd shpchp drm soundcore 8250_fintek i2c_algo_bit asus_atk0110 button acpi_cpufreq tpm_tis tpm processor dm_mod sg loop firewire_sbp2 parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 md_mod uas usb_storage hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic psmouse firewire_ohci 8139too 8139cp firewire_core crc_itu_t r8169 mii ata_piix xhci_pci xhci_hcd fjes pata_marvell libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 iface eth1 inet static address 192.168.0.127 netmask 255.255.255.0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:23:54:26:9d:3c brd ff:ff:ff:ff:ff:ff inet 192.168.1.110/24 brd 192.168.1.255 scope global dynamic eth0 valid_lft 84417sec preferred_lft 84417sec inet6 2a02:1205:507b:ffb0:223:54ff:fe26:9d3c/64 scope global noprefixroute dynamic valid_lft 295sec preferred_lft 55sec inet6 fe80::223:54ff:fe26:9d3c/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:40:f4:50:f7:ce brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 6644016 9491 0 0 0 0 0 1026 1126443 6664 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lo: 253144 2031 0 0 0 0 0 0 253144 2031 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 5222 total packets received 1 with invalid addresses 0 forwarded 0 incoming packets discarded 5221 incoming packets delivered 4469 requests sent out 56 outgoing packets dropped 8 dropped because of missing route Icmp: 112 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 112 112 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 112 IcmpMsg: InType3: 112 OutType3: 112 Tcp: 301 active connections openings 69 passive connection openings 0 failed connection attempts 1 connection resets received 7 connections established 7620 segments received 7385 segments send out 4 segments retransmited 1 bad segments received. 17 resets sent Udp: 1703 packets received 112 packets to unknown port received. 0 packet receive errors 943 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 2 UdpLite: TcpExt: 119 TCP sockets finished time wait in fast timer 104 delayed acks sent Quick ack mode was activated 8 times 3769 packet headers predicted 1093 acknowledgments not containing data payload received 489 predicted acknowledgments TCPSackRecovery: 2 2 congestion windows fully recovered without slow start 2 fast retransmits TCPLossProbes: 2 TCPLossProbeRecovery: 1 TCPDSACKOldSent: 8 TCPDSACKRecv: 1 2 connections reset due to unexpected data TCPDSACKIgnoredNoUndo: 1 TCPSackShiftFallback: 15 TCPRcvCoalesce: 1558 TCPOFOQueue: 65 TCPChallengeACK: 1 TCPSYNChallenge: 1 TCPAutoCorking: 23 TCPOrigDataSent: 2961 TCPKeepAlive: 191 IpExt: InMcastPkts: 1017 OutMcastPkts: 148 InBcastPkts: 72 OutBcastPkts: 55 InOctets: 2098828 OutOctets: 537803 InMcastOctets: 440298 OutMcastOctets: 39271 InBcastOctets: 11044 OutBcastOctets: 8006 InNoECTPkts: 5557 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics Controller [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at bc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03) Subsystem: ASUSTeK Computer Inc. 4 Series Chipset Integrated Graphics Controller [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fb000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) HD Audio Controller [1043:82fe] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f03fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 25 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000c7e00000-00000000c7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 27 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe6fa000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) 4 port SATA IDE Controller [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 9c00 [size=8] Region 1: I/O ports at 9880 [size=4] Region 2: I/O ports at 9800 [size=8] Region 3: I/O ports at 9480 [size=4] Region 4: I/O ports at 9400 [size=16] Region 5: I/O ports at 9080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 0 Region 0: Memory at fe6f9000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c_i801 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. 82801JI (ICH10 Family) 2 port SATA IDE Controller [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Region 5: I/O ports at a080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02) Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at c800 [size=256] Region 2: Memory at fe8ff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fdef0000 (64-bit, prefetchable) [size=64K] Expansion ROM at fe8c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:82e0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at fe9ffc00 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: pata_marvell Kernel modules: pata_marvell, ata_generic 03:00.0 USB controller [0c03]: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller [1106:3432] (rev 03) (prog-if 30 [XHCI]) Subsystem: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller [1106:3432] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139cp, 8139too 05:03.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. LSI FW322/323 IEEE 1394a FireWire Controller [1043:8294] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire_ohci ** USB devices: Bus 010 Device 004: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 010 Device 005: ID 046a:0011 Cherry GmbH G83 (RS 6000) Keyboard Bus 010 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 007: ID 059f:1057 LaCie, Ltd Bus 009 Device 002: ID 05e3:0732 Genesys Logic, Inc. All-in-One Cardreader Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 002: ID 2109:0811 VIA Labs, Inc. Hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.4.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_CH.UTF-8, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.4.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.59 ii initramfs-tools [linux-initramfs-tool] 0.123 ii kmod 22-1 ii linux-base 4.0 Versions of packages linux-image-4.4.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.4.0-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-36 pn linux-doc-4.4 <none> Versions of packages linux-image-4.4.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 20160110-1 pn xen-hypervisor <none> -- debconf information: linux-image-4.4.0-1-amd64/prerm/removing-running-kernel-4.4.0-1-amd64: true
--- End Message ---
--- Begin Message ---This bug was filed for a very old kernel. If you can reproduce it with - the current version in unstable/testing - the latest kernel from buster.backports please reopen the bug, see https://www.debian.org/Bugs/server-control
--- End Message ---
