Your message dated Sun, 09 May 2021 07:08:49 -0700 (PDT) with message-id <[email protected]> and subject line Closing this bug (BTS maintenance for src:linux bugs) has caused the Debian Bug report #805862, regarding linux-image-4.2.0-0.bpo.1-amd64: ThinkPad Ultra Dock no sound over hdmi or displayport if Kernel > 3.16 (Notebook X250) to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 805862: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=805862 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: src:linux Version: 4.2.6-1~bpo8+1 Severity: normal * What exactly did you do (or not do) that was effective (or ineffective)? My Dockingstation is connected via HDMI or Displayport to a Philips TV. If I start Debian 8 with Kernel 3.16 sound over HDMI works. If I start Debian 8 with Kernel > 3.16 sound over HDMI doesn't work. I tried also Ubuntu 15.10 and Fedora 23 with the same result. pavucontrol shows me, that all HDMI/DisplayPort Ports are unplugged * Hardware Notebook: Thinkpad X250 Dockingstation: Thinkpad Ultra Dock with 135Watt power supply -- Package-specific info: ** Version: Linux version 4.2.0-0.bpo.1-amd64 ([email protected]) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.2.6-1~bpo8+1 (2015-11-18) ** Command line: BOOT_IMAGE=/vmlinuz-4.2.0-0.bpo.1-amd64 root=UUID=635456dd-bfe8-42f5-9bd1-f1e9cb657887 ro quiet splash apparmor=1 security=apparmor allow-discards root_trim=yes pcie_aspm=force ** Tainted: UWO (4672) * Userspace-defined naughtiness. * Taint on warning. * Out-of-tree module has been loaded. ** Kernel log: [ 3.307762] intel_rapl: Found RAPL domain dram [ 3.309571] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 3.586195] Bluetooth: Core ver 2.20 [ 3.586213] NET: Registered protocol family 31 [ 3.586215] Bluetooth: HCI device and connection manager initialized [ 3.586220] Bluetooth: HCI socket layer initialized [ 3.586224] Bluetooth: L2CAP socket layer initialized [ 3.586231] Bluetooth: SCO socket layer initialized [ 3.587673] usbcore: registered new interface driver btusb [ 3.602762] Bluetooth: hci0: read Intel version: 370810011003110e09 [ 3.602765] Bluetooth: hci0: Intel device is already patched. patch num: 09 [ 3.842790] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780] [ 3.873796] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..] [ 3.934474] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf002a3/0x943300/0x12e800/0x10000, board id: 3075, fw id: 2560 [ 3.934483] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.972865] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 4.092656] media: Linux media interface: v0.10 [ 4.095381] Linux video capture interface: v2.00 [ 4.097777] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:703c) [ 4.105255] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input21 [ 4.105442] usbcore: registered new interface driver uvcvideo [ 4.105444] USB Video Class driver (1.1.1) [ 5.108189] em28xx: New device WinTV HVR-930C @ 480 Mbps (2040:1605, interface 0, class 0) [ 5.108192] em28xx: Audio interface 0 found (Vendor Class) [ 5.108193] em28xx: Video interface 0 found: isoc [ 5.108194] em28xx: DVB interface 0 found: isoc [ 5.108233] em28xx: chip ID is em2884 [ 5.168942] em2884 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x36f00eaa [ 5.168944] em2884 #0: EEPROM info: [ 5.168946] em2884 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 5.175374] em2884 #0: I2S audio, 5 sample rates [ 5.175377] em2884 #0: 500mA max power [ 5.175378] em2884 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000 [ 5.175425] em2884 #0: Identified as Hauppauge WinTV HVR 930C (card=81) [ 5.176347] tveeprom 10-0050: Hauppauge model 16009, rev B1F0, serial# 4035387385 [ 5.176350] tveeprom 10-0050: MAC address is 00:0d:fe:15:1f:f0 [ 5.176364] tveeprom 10-0050: tuner model is Xceive XC5000 (idx 150, type 76) [ 5.176366] tveeprom 10-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 5.176367] tveeprom 10-0050: audio processor is AVF4910B (idx 45) [ 5.176368] tveeprom 10-0050: decoder processor is AVF4910B (idx 44) [ 5.176369] tveeprom 10-0050: has no radio, has IR receiver, has no IR transmitter [ 5.176371] em2884 #0: analog set to isoc mode. [ 5.176372] em2884 #0: dvb set to isoc mode. [ 5.176405] usbcore: registered new interface driver em28xx [ 5.177594] em2884 #0: Registering V4L2 extension [ 5.177648] em2884 #0: Config register raw data: 0x5a [ 5.177891] em2884 #0: AC97 vendor ID = 0x9b019b01 [ 5.178011] em2884 #0: AC97 features = 0x9b01 [ 5.178011] em2884 #0: Unknown AC97 audio processor detected! [ 5.292241] em2884 #0: V4L2 video device registered as video1 [ 5.292245] em2884 #0: V4L2 extension successfully initialized [ 5.292247] em28xx: Registered (Em28xx v4l2 Extension) extension [ 5.293861] em2884 #0: Binding audio extension [ 5.293863] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 5.293864] em28xx-audio.c: Copyright (C) 2007-2014 Mauro Carvalho Chehab [ 5.293898] em2884 #0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196 [ 5.293899] em2884 #0: Number of URBs: 1, with 64 packets and 192 size [ 5.295007] em2884 #0: Audio extension successfully initialized [ 5.295010] em28xx: Registered (Em28xx Audio Extension) extension [ 5.297544] em2884 #0: Binding DVB extension [ 6.537815] usb 1-3.2: firmware: direct-loading firmware dvb-usb-hauppauge-hvr930c-drxk.fw [ 6.544988] drxk: status = 0x439130d9 [ 6.544992] drxk: detected a drx-3913k, spin A2, xtal 20.250 MHz [ 7.810452] drxk: DRXK driver version 0.9.4300 [ 7.819216] drxk: frontend initialized. [ 7.820500] xc5000 10-0061: creating new instance [ 7.820760] xc5000: Successfully identified at address 0x61 [ 7.820761] xc5000: Firmware has not been loaded previously [ 7.820764] DVB: registering new adapter (em2884 #0) [ 7.820767] usb 1-3.2: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)... [ 7.822192] em2884 #0: DVB extension successfully initialized [ 7.822197] em28xx: Registered (Em28xx dvb Extension) extension [ 8.039980] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 8.233998] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input20 [ 8.982222] NET: Registered protocol family 38 [ 9.177874] XFS (dm-0): Mounting V4 Filesystem [ 9.209906] XFS (dm-0): Ending clean mount [ 11.898261] XFS (dm-1): Mounting V4 Filesystem [ 11.919515] XFS (dm-1): Ending clean mount [ 11.925194] systemd-journald[199]: Received request to flush runtime journal from PID 1 [ 11.964483] audit_printk_skb: 63 callbacks suppressed [ 11.964488] audit: type=1305 audit(1448276403.726:32): audit_pid=1048 old=0 auid=4294967295 ses=4294967295 res=1 [ 11.967469] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.971853] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 11.977956] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.110773] Adding 8597500k swap on /dev/mapper/swap. Priority:-1 extents:1 across:8597500k SSDscFS [ 12.318632] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.318635] Bluetooth: BNEP filters: protocol multicast [ 12.318639] Bluetooth: BNEP socket layer initialized [ 12.330702] vboxdrv: Found 4 processor cores [ 12.351435] vboxdrv: TSC mode is Invariant, tentative frequency 2194910040 Hz [ 12.351438] vboxdrv: Successfully loaded version 5.0.10 (interface 0x00240000) [ 12.555979] VBoxNetFlt: Successfully started. [ 12.557626] VBoxNetAdp: Successfully started. [ 12.559839] VBoxPciLinuxInit [ 12.561657] vboxpci: IOMMU not found (not registered) [ 12.902870] usb 1-7: USB disconnect, device number 7 [ 12.903014] Bluetooth: hci0: turning off Intel device LED failed (-19) [ 16.423476] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 129.969141] [drm:gen8_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun ** Model information sys_vendor: LENOVO product_name: 20CMCT01WW product_version: ThinkPad X250 chassis_vendor: LENOVO chassis_version: None bios_vendor: LENOVO bios_version: N10ET38W (1.17 ) board_vendor: LENOVO board_name: 20CMCT01WW board_version: 0B12417 WIN ** Loaded modules: pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep ip6t_REJECT nf_reject_ipv6 xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT nf_reject_ipv4 xt_limit xt_tcpudp xt_addrtype nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables dm_crypt algif_skcipher af_alg xc5000 drxk em28xx_dvb dvb_core em28xx_alsa em28xx_v4l em28xx tveeprom uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media joydev btusb btrtl btbcm btintel bluetooth crc16 nls_utf8 nls_cp437 vfat x86_pkg_temp_thermal intel_powerclamp intel_rapl iosf_mbi fat kvm_intel kvm crct10dif_pclmul crc32_pclmul sha256_ssse3 sha256_generic hmac arc4 dm_mod iTCO_wdt iTCO_vendor_support msr coretemp acpi_call(O) drbg ansi_cprng iwlmvm snd_hda_codec_hdmi mac80211 snd_hda_codec_realtek aesni_intel snd_hda_codec_generic iwlwifi aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd efi_pstore rtsx_pci_ms snd_hda_intel memstick cfg80211 snd_hda_codec psmouse serio_raw snd_hda_core snd_hwdep pcspkr snd_pcm i2c_i801 lpc_ich shpchp mei_me efivars mei snd_timer thinkpad_acpi nvram snd soundcore battery rfkill ac tpm_tis tpm evdev processor fuse parport_pc ppdev lp parport autofs4 xfs libcrc32c sg hid_generic sd_mod usbhid hid rtsx_pci_sdmmc mmc_core ahci libahci crc32c_intel libata scsi_mod rtsx_pci mfd_core ehci_pci e1000e ehci_hcd ptp pps_core xhci_pci xhci_hcd i915 i2c_algo_bit usbcore usb_common drm_kms_helper drm thermal wmi video thermal_sys button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 09) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: bdw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 09) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at e1230000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI]) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 Region 0: Memory at e1220000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI Controller #1 [8086:9cba] (rev 03) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at e1239000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection (3) I218-LM [8086:15a2] (rev 03) Subsystem: Lenovo Device [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e1200000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at e123e000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 3080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at e1234000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 [8086:9c9a] (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e1100000-e11fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 [8086:9c94] (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: e1000000-e10fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB EHCI Controller [8086:9ca6] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e123d000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc3] (rev 03) Subsystem: Lenovo Device [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:2226] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at 30a8 [size=8] Region 1: I/O ports at 30b4 [size=4] Region 2: I/O ports at 30a0 [size=8] Region 3: I/O ports at 30b0 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e123c000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller [8086:9ca2] (rev 03) Subsystem: Lenovo Device [17aa:2226] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at e1238000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus 00:1f.6 Signal processing controller [1180]: Intel Corporation Wildcat Point-LP Thermal Management Controller [8086:9ca4] (rev 03) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 255 Region 0: Memory at e123b000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01) Subsystem: Lenovo Device [17aa:2226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at e1100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci 03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095b] (rev 59) Subsystem: Intel Corporation Dual Band Wireless-N 7265 [8086:5200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi ** USB devices: Bus 003 Device 002: ID 8087:8001 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 17ef:1010 Lenovo Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 009: ID 04ca:703c Lite-On Technology Corp. Bus 001 Device 005: ID 138a:0017 Validity Sensors, Inc. Bus 001 Device 003: ID 058f:9540 Alcor Micro Corp. Bus 001 Device 008: ID 17ef:100f Lenovo Bus 001 Device 006: ID 04f2:0976 Chicony Electronics Co., Ltd Bus 001 Device 004: ID 2040:1605 Hauppauge Bus 001 Device 002: ID 17ef:1010 Lenovo Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.2 APT prefers stable APT policy: (900, 'stable'), (500, 'stable-updates') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.2.0-0.bpo.1-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.2.0-0.bpo.1-amd64 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 18-3 ii linux-base 4.0~bpo8+1 Versions of packages linux-image-4.2.0-0.bpo.1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.0.6-3 Versions of packages linux-image-4.2.0-0.bpo.1-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi | extlinux <none> pn linux-doc-4.2 <none> Versions of packages linux-image-4.2.0-0.bpo.1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.44~bpo8+1 pn firmware-libertas <none> ii firmware-linux 0.44~bpo8+1 ii firmware-linux-nonfree 0.44~bpo8+1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-4.2.0-0.bpo.1-amd64/postinst/depmod-error-initrd-4.2.0-0.bpo.1-amd64: false linux-image-4.2.0-0.bpo.1-amd64/postinst/mips-initrd-4.2.0-0.bpo.1-amd64: linux-image-4.2.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.2.0-0.bpo.1-amd64: true
--- End Message ---
--- Begin Message ---Hi This bug was filed for a very old kernel or the bug is old itself without resolution. If you can reproduce it with - the current version in unstable/testing - the latest kernel from backports please reopen the bug, see https://www.debian.org/Bugs/server-control for details. Regards, Salvatore
--- End Message ---
