Package: src:linux
Version: 5.10.38-1
Severity: important
X-Debbugs-Cc: pitsior...@gmail.com

Preface.
I have disabled sleep, hibernate etc via systemd as you can see below.

$ systemctl status sleep.target suspend.target hibernate.target hybrid-
sleep.target
● sleep.target
     Loaded: masked (Reason: Unit sleep.target is masked.)
     Active: inactive (dead)

● suspend.target
     Loaded: masked (Reason: Unit suspend.target is masked.)
     Active: inactive (dead)

● hibernate.target
     Loaded: masked (Reason: Unit hibernate.target is masked.)
     Active: inactive (dead)

● hybrid-sleep.target
     Loaded: masked (Reason: Unit hybrid-sleep.target is masked.)
     Active: inactive (dead)

and I have set my keyboard's sleep button to shutdown the system via systemctl

    <keybind key="XF86Sleep">
      <action name="Execute">
        <command>systemctl poweroff</command>
      </action>
    </keybind>

So when I press the sleep button, the system shuts down. And I have been using
it like so for the last 5+ years.

But today, after I upgraded to 5.10.38 and rebooted, I pressed sleep and the
system... must have gone to sleep. Pressing the powerbutton did not get me to
post or grub or anything. It was just working with nothing on screen. I could
ssh to it from my phone or my laptop, so I ran reboot and it hypothetically
rebooted. I say "hypothetically", because there was no post, grub, boot
messages or desktop again. I rebooted it with reisub, but same thing happened.
Both network (leds on nic) and usb (light on optical mouse) showed that it was
really powered on, on all the forementioned situations.

Since I can ssh to it, I ran dmesg and it showed nothing weird. Systemd-analyze
blade showed no delays or issues too. I installed 5.10.28 again (because I
remove every old kernel when the new one works) and now I am able to see my
desktop and write all this.

Right now, I am on 5.10.28 (package linux-image-5.10.0-6-amd64) and I am trying
to figure out why all this happened.


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: P35-DS3R
product_version: 
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: 
bios_vendor: Award Software International, Inc.
bios_version: F13
board_vendor: Gigabyte Technology Co., Ltd.
board_name: P35-DS3R
board_version: 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM 
Controller [8086:29c0] (rev 02)
        Subsystem: Gigabyte Technology Co., Ltd 82G33/G31/P35/P31 Express DRAM 
Controller [1458:5000]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI 
Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 24
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff [size=4K]
        Memory behind bridge: f4000000-f6ffffff [size=48M]
        Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff 
[size=512M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB UHCI 
Controller [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at e100 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB UHCI 
Controller [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at e200 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB UHCI 
Controller [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at e000 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB2 EHCI 
Controller [1458:5006]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f9104000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller [8086:293e] (rev 02)
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) HD Audio 
Controller [1458:a002]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at f9100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 25
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000a000-0000afff [size=4K]
        Memory behind bridge: f9200000-f93fffff [size=2M]
        Prefetchable memory behind bridge: 00000000f9400000-00000000f95fffff 
[size=2M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin D routed to IRQ 26
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff [size=4K]
        Memory behind bridge: f9000000-f90fffff [size=1M]
        Prefetchable memory behind bridge: 00000000f9600000-00000000f97fffff 
[size=2M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 27
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff [size=4K]
        Memory behind bridge: f7000000-f8ffffff [size=32M]
        Prefetchable memory behind bridge: 00000000f9800000-00000000f99fffff 
[size=2M]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB UHCI 
Controller [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at e300 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB UHCI 
Controller [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at e400 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB UHCI 
Controller [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at e500 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) USB2 EHCI 
Controller [1458:5006]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f9105000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
92) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        I/O behind bridge: 00009000-00009fff [size=4K]
        Memory behind bridge: [disabled]
        Prefetchable memory behind bridge: [disabled]
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface 
Controller [8086:2916] (rev 02)
        Subsystem: Gigabyte Technology Co., Ltd 82801IR (ICH9R) LPC Interface 
Controller [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 
port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Gigabyte Technology Co., Ltd 82801IR/IO/IH (ICH9R/DO/DH) 6 
port SATA Controller [AHCI mode] [1458:b005]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 28
        Region 0: I/O ports at e600 [size=8]
        Region 1: I/O ports at e700 [size=4]
        Region 2: I/O ports at e800 [size=8]
        Region 3: I/O ports at e900 [size=4]
        Region 4: I/O ports at ea00 [size=32]
        Region 5: Memory at f9106000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller 
[8086:2930] (rev 02)
        Subsystem: Gigabyte Technology Co., Ltd 82801I (ICH9 Family) SMBus 
Controller [1458:5001]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f9107000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 0500 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 
210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. GT218 [GeForce 210] [1043:8490]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 30
        Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at b000 [size=128]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia
        Kernel modules: nvidia

01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio 
Controller [10de:0be3] (rev a1)
        Subsystem: ASUSTeK Computer Inc. High Definition Audio Controller 
[1043:8490]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE 
Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:b000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 19
        Region 5: Memory at f9000000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE 
Controller [197b:2363] (rev 02) (prog-if 85 [PCI native mode-only controller, 
supports bus mastering])
        Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:b000]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 16
        Region 0: I/O ports at c000 [size=8]
        Region 1: I/O ports at c100 [size=4]
        Region 2: I/O ports at c200 [size=8]
        Region 3: I/O ports at c300 [size=4]
        Region 4: I/O ports at c400 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_jmicron
        Kernel modules: pata_jmicron, ata_generic

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
        Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at d000 [size=256]
        Region 2: Memory at f8000000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at f7000000 [virtual] [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: r8169
        Kernel modules: r8169


** USB devices:
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 09da:f012 A4Tech Co., Ltd. USB Device
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 11.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'testing-security'), (500, 'unstable'), 
(1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-6-amd64 (SMP w/2 CPU threads)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, 
TAINT_UNSIGNED_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-5.10.0-7-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.140
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-7-amd64 recommends:
pn  apparmor             <none>
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-7-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:6.04~git20190206.bf6db5b4+dfsg1-3
ii  grub-pc                 2.04-17
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-7-amd64 is related to:
ii  firmware-amd-graphics     20210315-2
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20210315-2
ii  firmware-misc-nonfree     20210315-2
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20210315-2
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Reply via email to