Package: src:linux
Version: 5.10.92-1
Severity: important
X-Debbugs-Cc: flacusbigo...@gmail.com
Dear Maintainer,
* What led up to the situation?
I just upgraded from Debian Buster to Debian Bullseye and after the upgrade,
the ethernet port on the Syba SD-PEX50100 PCI-E card has become unusable.
In Bullseye, with kernel 5.10.0-11-amd64, the ethernet port on the card starts
getting random MAC addresses during bootup which causes issues with ISPs that
use DHCP servers that lock-on to MAC addresses. I also think the ethernet port
does not work in general in Bullseye but I am not sure how to prove that wider
claim.
* What exactly did you do (or not do) that was effective (or
ineffective)?
The ethernet port works just fine in Debian Buster with kernel 4.19.0-11-amd64.
It never fails to obtain a lease from the ISP DHCP server and its real MAC
address is always used because it never gets randomized.
I have used a pair of Debian Live USB sticks to boot from (one containing
Bullseye and another containing Buster) to prove that the card works on one and
not the other. In these environments, the card is managed by
NetworkManager.service. I have also tested it with a hard-drive installation of
Bullseye where the card is managed via networking.service instead and the same
issues occur as with the Bullseye Live image that uses NetworkManager.service.
In Bullseye, the /var/log/messages file shows kernel logs that indicate that
there are issues during boot up with the PCI-E card. Those logs do not occur at
all in Debian Buster. This is why I think the issue is in the kernel.
The kernel logs indicating issues in Bullseye include a warning of a
"host system error" by xhci_hcd, and several write/read errors by the ax88179
ethernet kernel driver/module for the card, as follows:
Feb 22 17:22:53 server1 kernel: [ 1.380198] xhci_hcd 0000:1c:00.0: xHCI
Host Controller
Feb 22 17:22:53 server1 kernel: [ 1.380205] xhci_hcd 0000:1c:00.0: new
USB bus registered, assigned bus number 5
Feb 22 17:22:53 server1 kernel: [ 1.380209] xhci_hcd 0000:1c:00.0: Host
supports USB 3.0 SuperSpeed
Feb 22 17:22:53 server1 kernel: [ 1.380260] usb usb5: New USB device
found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Feb 22 17:22:53 server1 kernel: [ 1.380261] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Feb 22 17:22:53 server1 kernel: [ 1.380263] usb usb5: Product: xHCI Host
Controller
Feb 22 17:22:53 server1 kernel: [ 1.380264] usb usb5: Manufacturer:
Linux 5.10.0-11-amd64 xhci-hcd
Feb 22 17:22:53 server1 kernel: [ 1.380265] usb usb5: SerialNumber:
0000:1c:00.0
Feb 22 17:22:53 server1 kernel: [ 1.380396] hub 5-0:1.0: USB hub found
Feb 22 17:22:53 server1 kernel: [ 1.380411] hub 5-0:1.0: 4 ports detected
Feb 22 17:22:53 server1 kernel: [ 5.508457] ax88179_178a 5-1:1.0 eth0:
register 'ax88179_178a' at usb-0000:1c:00.0-1, ASIX AX88179 USB 3.0 Gigabit
Ethernet, 00:11:22:33:44:55
Feb 22 17:23:25 server1 kernel: [ 39.576966] xhci_hcd 0000:1c:00.0:
WARNING: Host System Error
Feb 22 17:26:00 server1 kernel: [ 194.596335] ax88179_178a 5-1:1.0
enx001122334455: Failed to read reg index 0x0002: -22
Feb 22 17:26:00 server1 kernel: [ 194.596338] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0002: -22
Feb 22 17:26:11 server1 kernel: [ 205.378965] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0002: -22
Feb 22 17:26:11 server1 kernel: [ 205.378969] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0002: -22
Feb 22 17:26:11 server1 kernel: [ 205.585506] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693515] ax88179_178a 5-1:1.0
enx001122334455: Failed to read reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693524] ax88179_178a 5-1:1.0
enx001122334455: Failed to read reg index 0x0006: -22
Feb 22 17:26:11 server1 kernel: [ 205.693527] ax88179_178a 5-1:1.0
enx001122334455: invalid MAC address, using random
Feb 22 17:26:11 server1 kernel: [ 205.693532] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0006: -22
Feb 22 17:26:11 server1 kernel: [ 205.693535] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0005: -22
Feb 22 17:26:11 server1 kernel: [ 205.693538] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693541] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693544] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693547] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693550] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0002: -22
Feb 22 17:26:11 server1 kernel: [ 205.693553] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693555] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0002: -22
Feb 22 17:26:11 server1 kernel: [ 205.693561] ax88179_178a 5-1:1.0
enx001122334455: Failed to read reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693564] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0001: -22
Feb 22 17:26:11 server1 kernel: [ 205.693567] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x001f: -22
Feb 22 17:26:11 server1 kernel: [ 205.693570] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x0019: -22
Feb 22 17:26:11 server1 kernel: [ 205.693573] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x001f: -22
Feb 22 17:26:11 server1 kernel: [ 205.693576] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000d: -22
Feb 22 17:26:11 server1 kernel: [ 205.693579] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000e: -22
Feb 22 17:26:11 server1 kernel: [ 205.693581] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000d: -22
Feb 22 17:26:11 server1 kernel: [ 205.693586] ax88179_178a 5-1:1.0
enx001122334455: Failed to read reg index 0x000e: -22
Feb 22 17:26:11 server1 kernel: [ 205.693590] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000d: -22
Feb 22 17:26:11 server1 kernel: [ 205.693593] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000e: -22
Feb 22 17:26:11 server1 kernel: [ 205.693595] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000d: -22
Feb 22 17:26:11 server1 kernel: [ 205.693598] ax88179_178a 5-1:1.0
enx001122334455: Failed to write reg index 0x000e: -22
Feb 22 17:26:11 server1 kernel: [ 205.693604] ax88179_178a 5-1:1.0
enx001122334455: Failed to read reg index 0x0000: -22
I have also been able to reproduce the issue manually by removing the
corresponding ".rules" file from /etc/network/interfaces.d/ (so that the
networking.service does not attempt to bring up the ethernet port during boot)
and later issuing ifup and ifdown commands. Whenever I do this manually, I see
the driver write the log that says "invalid MAC address, using random", right
after the failed ifup command. At that time, the MAC address gets randomized
and it keeps getting changed to a different random value each time I issue the
ifup command from that point on. The card reverts to using its real MAC after
a reboot.
BTW, when I issue the ifup commands manually, I have verified that the value of
/sys/class/net/enx00133bab605e/addr_assign_type is 0 before I issue the ifup
commands. And I have verified also that when the randomization starts, the
value of addr_assign_type has changed to a 1.
I have also attempted to read the eeprom via ethtool -e enx00133bab605e, but
that results in the following error:
root@server1:~# ethtool -e enx00133bab605e
Cannot get EEPROM data: Input/output error
Here is the output of ethtool -i:
root@server1:~# ethtool -i enx00133bab605e
driver: ax88179_178a
version: 5.10.0-11-amd64
firmware-version:
expansion-rom-version:
bus-info: 9-1:1.0
supports-statistics: no
supports-test: no
supports-eeprom-access: yes
supports-register-dump: no
supports-priv-flags: no
* What was the outcome of this action?
I am able to have the card working on Buster, but not on Bullseye.
* What outcome did you expect instead?
I would like to have the card work in Bullseye because it is now the current
version of Debian, and I want to stay current, particularly with security
patches.
-- Package-specific info:
** Version:
Linux version 5.10.0-10-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian
10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP
Debian 5.10.84-1 (2021-12-08)
** Command line:
BOOT_IMAGE=/live/vmlinuz-5.10.0-10-amd64
initrd=/live/initrd.img-5.10.0-10-amd64 boot=live components splash quiet
** Tainted: I (2048)
* workaround for bug in platform firmware applied
** Kernel log:
[ 548.054239] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 548.054246] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 548.054307] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 548.054314] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 574.856913] audit: type=1400 audit(1645798498.773:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="tcpdump" pid=3610
comm="apparmor_parser"
[ 590.208893] r8169 0000:28:00.0 ens4: Link is Down
[ 593.009353] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009366] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009375] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009379] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009383] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009386] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009419] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009424] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009428] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009432] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009581] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.009586] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.044790] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.044802] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.046261] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.046269] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.046414] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.046421] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.047027] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.047035] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.047098] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 593.047107] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020783] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020794] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020808] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020814] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020821] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020826] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020877] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020884] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020891] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.020897] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.021065] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.021075] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.062378] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.062390] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.064212] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.064221] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.064383] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.064391] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.065196] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.065205] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.065266] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 638.065275] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 648.510589] RTL8211B Gigabit Ethernet r8169-0-2800:00: attached PHY driver
[RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-2800:00, irq=IGNORE)
[ 648.573963] r8169 0000:28:00.0 ens4: Link is Down
[ 683.021088] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021099] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021113] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021119] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021126] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021132] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021181] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021188] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021196] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021201] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021256] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 683.021266] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 710.922673] device enx00133bab605e entered promiscuous mode
[ 710.922713] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 749.181872] ax88179_178a 9-1:1.0 enx00133bab605e: Error submitting the
control message: status=-22
[ 749.181920] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to read reg index
0x0002: -22
[ 749.181925] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0002: -22
[ 766.741721] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0002: -22
[ 766.741726] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0002: -22
[ 766.947616] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055613] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to read reg index
0x0001: -22
[ 767.055623] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to read reg index
0x0006: -22
[ 767.055625] ax88179_178a 9-1:1.0 enx00133bab605e: invalid MAC address, using
random
[ 767.055630] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0006: -22
[ 767.055634] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0005: -22
[ 767.055637] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055639] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055642] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055645] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055648] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0002: -22
[ 767.055651] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055654] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0002: -22
[ 767.055660] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to read reg index
0x0001: -22
[ 767.055663] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0001: -22
[ 767.055666] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x001f: -22
[ 767.055669] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x0019: -22
[ 767.055672] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x001f: -22
[ 767.055675] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000d: -22
[ 767.055678] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000e: -22
[ 767.055681] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000d: -22
[ 767.055686] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to read reg index
0x000e: -22
[ 767.055690] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000d: -22
[ 767.055693] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000e: -22
[ 767.055696] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000d: -22
[ 767.055698] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to write reg index
0x000e: -22
[ 767.055704] ax88179_178a 9-1:1.0 enx00133bab605e: Failed to read reg index
0x0000: -22
[ 808.918669] perf: interrupt took too long (2523 > 2500), lowering
kernel.perf_event_max_sample_rate to 79250
[ 878.107291] device enx00133bab605e left promiscuous mode
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Z400 Workstation
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786G3 v03.61
board_vendor: Hewlett-Packard
board_name: 0B4Ch
board_version: D
** Loaded modules:
ext4
crc16
mbcache
jbd2
nls_ascii
nls_cp437
vfat
fat
or51132
lgdt330x
cx88_dvb
cx88_vp3054_i2c
videobuf2_dvb
dvb_core
ir_rc5_decoder
intel_powerclamp
rc_hauppauge
coretemp
tuner_simple
kvm_intel
tuner_types
tda9887
tda8290
kvm
tuner
snd_hda_codec_realtek
irqbypass
snd_hda_codec_generic
intel_cstate
cx88_alsa
cx8800
cx8802
intel_uncore
ledtrig_audio
hp_wmi
cx88xx
snd_hda_codec_hdmi
videobuf2_dma_sg
tveeprom
sparse_keymap
videobuf2_memops
rfkill
wmi_bmof
rc_core
serio_raw
videobuf2_v4l2
pcspkr
snd_hda_intel
videobuf2_common
snd_intel_dspcfg
soundwire_intel
iTCO_wdt
videodev
intel_pmc_bxt
soundwire_generic_allocation
iTCO_vendor_support
snd_soc_core
watchdog
mc
ax88179_178a
snd_compress
soundwire_cadence
snd_hda_codec
joydev
usbnet
mii
snd_hda_core
snd_hwdep
soundwire_bus
snd_pcm
snd_timer
snd
soundcore
sg
evdev
i7core_edac
acpi_cpufreq
msr
parport_pc
ppdev
lp
parport
fuse
configfs
ip_tables
x_tables
autofs4
squashfs
loop
overlay
isofs
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
hid_logitech_hidpp
hid_logitech_dj
raid1
md_mod
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
sr_mod
cdrom
crct10dif_common
hid_microsoft
ff_memless
hid_generic
usbhid
hid
uas
usb_storage
nouveau
mxm_wmi
video
i2c_algo_bit
ttm
drm_kms_helper
ahci
xhci_pci
crc32c_intel
libahci
firewire_ohci
tg3
xhci_hcd
psmouse
libata
cec
ehci_pci
uhci_hcd
ehci_hcd
firewire_core
drm
crc_itu_t
lpc_ich
usbcore
r8169
ptp
pps_core
scsi_mod
realtek
mdio_devres
libphy
usb_common
wmi
button
** Network interface configuration:
*** /etc/network/interfaces:
auto lo
iface lo inet loopback
*** /etc/network/interfaces.d/setup:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN group default qlen 1000
link/ether 04:8d:38:b7:0a:f9 brd ff:ff:ff:ff:ff:ff
altname enp40s0
3: enp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 1c:c1:de:5d:0e:ef brd ff:ff:ff:ff:ff:ff
4: enx00133bab605e: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN
group default qlen 1000
link/ether ce:75:a7:cf:c5:87 brd ff:ff:ff:ff:ff:ff permaddr
00:13:3b:ab:60:5e
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 133603 1633 0 0 0 0 0 0 133603
1633 0 0 0 0 0 0
ens4: 37349196 30770 0 0 0 0 0 0 1005007
15064 0 0 0 0 0 0
enp1s0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
enx00133bab605e: 16414 183 0 1 0 0 0 0
3403 22 0 164 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port
[8086:3405] (rev 13)
Subsystem: Hewlett-Packard Company 5520/5500/X58 I/O Hub to ESI Port
[103c:1309]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
IOMMU group: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 25
IOMMU group: 1
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: fc000000-fc0fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 26
IOMMU group: 2
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: ea000000-eb0fffff [size=17M]
Prefetchable memory behind bridge: 00000000e0000000-00000000e9ffffff
[size=160M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 27
IOMMU group: 3
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: ef000000-ef0fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link
Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 4
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol
Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 4
00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer
Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 5
Capabilities: <access denied>
00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer
Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 5
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 6
Capabilities: <access denied>
Kernel driver in use: i7core_edac
Kernel modules: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 7
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 8
Capabilities: <access denied>
00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution
Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 9
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
IOMMU group: 10
Region 4: I/O ports at b000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
IOMMU group: 10
Region 4: I/O ports at b020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
IOMMU group: 10
Region 4: I/O ports at b040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB2 EHCI
Controller [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
IOMMU group: 10
Region 0: Memory at ed004800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) HD Audio
Controller [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
IOMMU group: 11
Region 0: Memory at ed000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
IOMMU group: 12
Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: ee000000-ee0fffff [size=1M]
Prefetchable memory behind bridge: 00000000eb100000-00000000eb2fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
IOMMU group: 12
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: ec000000-ec0fffff [size=1M]
Prefetchable memory behind bridge: 00000000eb300000-00000000eb4fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
IOMMU group: 13
Region 4: I/O ports at b060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
IOMMU group: 13
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB UHCI
Controller [103c:1309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
IOMMU group: 13
Region 4: I/O ports at b0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801JI (ICH10 Family) USB2 EHCI
Controller [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
IOMMU group: 13
Region 0: Memory at ed004c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 14
Bus: primary=00, secondary=37, subordinate=37, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: f4000000-fb0fffff [size=113M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Hewlett-Packard Company 82801JIR (ICH10R) LPC Interface
Controller [103c:1309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 15
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation SATA Controller [RAID
mode] [8086:2822]
Subsystem: Hewlett-Packard Company SATA Controller [RAID mode]
[103c:1309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
IOMMU group: 15
Region 0: I/O ports at b100 [size=8]
Region 1: I/O ports at b110 [size=4]
Region 2: I/O ports at b108 [size=8]
Region 3: I/O ports at b114 [size=4]
Region 4: I/O ports at b0c0 [size=32]
Region 5: Memory at ed004000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme
BCM5764M Gigabit Ethernet PCIe [14e4:1684] (rev 10)
Subsystem: Hewlett-Packard Company NetXtreme BCM5764M Gigabit Ethernet
PCIe [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
IOMMU group: 12
Region 0: Memory at ec000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
03:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0
x1 4-port SATA 6 Gb/s Controller [1b4b:9215] (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-port
SATA 6 Gb/s Controller [1b4b:9215]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
IOMMU group: 16
Region 0: I/O ports at c020 [size=8]
Region 1: I/O ports at c030 [size=4]
Region 2: I/O ports at c028 [size=8]
Region 3: I/O ports at c034 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at fc000000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fc040000 [virtual] [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
0f:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208B [GeForce GT
710] [10de:128b] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] GK208B [GeForce GT
710] [1462:8c93]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
IOMMU group: 17
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at e8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
0f:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller
[10de:0e0f] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] GK208 HDMI/DP Audio
Controller [1462:8c93]
Physical Slot: 2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 36
IOMMU group: 17
Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
1c:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host
Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller
[1106:3483]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
IOMMU group: 12
Region 0: Memory at ee000000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
28:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express
Gigabit Ethernet controller [10ec:8168]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
IOMMU group: 18
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at ef000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at ef020000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
37:04.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: pcHDTV pcHDTV HD-5500 [7063:5500]
Physical Slot: 6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
IOMMU group: 14
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800
37:04.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: pcHDTV pcHDTV HD-5500 [7063:5500]
Physical Slot: 6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
IOMMU group: 14
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
Kernel modules: cx88_alsa
37:04.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: pcHDTV pcHDTV HD-5500 [7063:5500]
Physical Slot: 6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
IOMMU group: 14
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802
37:04.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: pcHDTV pcHDTV HD-5500 [7063:5500]
Physical Slot: 6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
IOMMU group: 14
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
37:05.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a
Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company FW322/323 [TrueFire] 1394a
Controller [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
IOMMU group: 14
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
37:09.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: pcHDTV pcHDTV HD3000 HDTV [7063:3000]
Physical Slot: 5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
IOMMU group: 14
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800
37:09.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: pcHDTV CX23880/1/2/3 PCI Video and Audio Decoder [Audio
Port] [7063:3000]
Physical Slot: 5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
IOMMU group: 14
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
Kernel modules: cx88_alsa
37:09.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: pcHDTV pcHDTV HD3000 HDTV [7063:3000]
Physical Slot: 5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
IOMMU group: 14
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802
3f:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [8086:2c41] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QuickPath
Architecture Generic Non-Core Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 19
3f:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QuickPath
Architecture System Address Decoder [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 19
3f:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0
[8086:2c10] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Link 0
[103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 20
3f:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0
[8086:2c11] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 QPI Physical 0
[103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 20
3f:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller [8086:2c18] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 21
3f:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Target Address Decoder [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 21
3f:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Test Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 21
3f:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Control Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 22
3f:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Address Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 22
3f:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Rank Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 22
3f:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 0 Thermal Control Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 22
3f:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Control Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 23
3f:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Address Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 23
3f:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Rank Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 23
3f:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 1 Thermal Control Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 23
3f:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Control Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 24
3f:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Address Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 24
3f:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Rank Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 24
3f:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated
Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05)
Subsystem: Hewlett-Packard Company Xeon 5500/Core i7 Integrated Memory
Controller Channel 2 Thermal Control Registers [103c:1309]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 24
** USB devices:
Bus 010 Device 003: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya
Technology Corp.) Flash Drive
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard
4000 V1.0
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for
Notebooks
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 002: ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya
Technology Corp.) Flash Drive
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 051d:0002 American Power Conversion Uninterruptible
Power Supply
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 11.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-10-amd64 (SMP w/8 CPU threads)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-10-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-10-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-10-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi-amd64 | extlinux <none>
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-10-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
