Hi I would like to upload linux version 6.5.3-1 later today to unstable. The new upload would consist of a new upstream version switching to the 6.5.y series in unstable. An ABi bump is included.
The new upload fixes CVE-2023-4623 and CVE-2023-25775. Apart from switching from 6.4.y to 6.5.y series there are additional changes covering: * Enable KFENCE support (not enabled by default) (Closes: #1025845) * net/xdp: Enable XDP_SOCKETS_DIAG as module (Closes: #1051455) * udeb: Make MPT modules optional in scsi-modules (fixes FTBFS on s390x) (Closes: #1051249) * Refresh "radeon, amdgpu: Firmware is required for DRM and KMS on R600 onward" * Set ABI to 1 * [rt] Update to 6.5.2-rt8 * [arm64] Add reset-rzg2l-usbphy-ctrl to usb-modules udeb in order to enable USB support on Renesas RZ/G2L-SMARC boards. * [arm64,armhf] drivers/hwspinlock: Enable CONFIG_HWSPINLOCK * [arm64] Add support for Lenovo ThinkPad X13s: enable as modules SC_DISPCC_8280XP, SC_GCC_8280XP, SC_GPUCC_8280XP, QCOM_SPMI_ADC5, INTERCONNECT_QCOM_OSM_L3, INTERCONNECT_QCOM_SC8280XP, LEDS_QCOM_LPG, QCOM_IPCC, QCOM_FASTRPC, NVMEM_SPMI_SDAM, PHY_QCOM_EDP, PHY_QCOM_QMP_PCIE, PHY_QCOM_USB_SNPS_FEMTO_V2, PINCTRL_SC8280XP, PINCTRL_SC8280XP_LPASS_LPI, PINCTRL_LPASS_LPI, POWER_RESET_QCOM_PON, BATTERY_QCOM_BATTMGR, QCOM_Q6V5_ADSP, QCOM_Q6V5_PAS, QCOM_Q6V5_WCSS, QCOM_SYSMON, QCOM_LLCC, QCOM_OCMEM, QCOM_PMIC_GLINK, QCOM_STATS, QCOM_APR, QCOM_ICC_BWMON, SPI_QCOM_GENI, TYPEC_MUX_GPIO_SBU, QRTR_SMD, SND_SOC_WCD938X_SDW, SND_SOC_LPASS_WSA_MACRO, SND_SOC_LPASS_VA_MACRO, SND_SOC_LPASS_RX_MACRO, SND_SOC_LPASS_TX_MACRO, SND_SOC_QDSP6 (Thanks Steve Capper!) * [arm64] Add Thinkpad X13s modules to udebs * drivers/char/hw_random: Change HW_RANDOM from module to built-in (Closes: #1041007) * drivers/char/tpm: Do not explicitly set HW_RANDOM_TPM * [arm64, cloud, x86] drivers/char/tpm: Do not explicitly enable TCG_TPM * [arm*,ppc64*,sparc64,s390x] drivers/char/hw_random: Prevent some HW Random Number Generator drivers from being built-in And the following already included in experimental uploads up to 6.5.1-1~exp1: * [riscv64] enable cpufreq support for Starfive JH7110: enable CPUFREQ_DT, MFD_AXP20X_I2C and REGULATOR_AXP20X as modules, and CPUFREQ_DT_PLATDEV as built-in. * [armel/rpi,armhf,arm64] enable CPUFREQ_DT_PLATDEV as built-in, as it does not get autoloaded as a module (Closes: #1050587) * Use pytest to test some of the code. * Re-add /usr/include/drm and /usr/include/scsi to linux-libc-dev; they don't longer conflict with other packages. (closes: #1050368) * Properly split host and build flags. (closes: #1050991) * [x86] drivers/hwtracing/intel_th: Enable INTEL_TH_ACPI Intel Trace Hub ACPI controller as module (Closes: #1050342) * [amd64] arch/x86/ras: Enable RAS_CEC (Correctable Errors Collector) (Closes: #1050940) * [arm64] sound/pci: Enable SND_CMIPCI as a module * linux-image: bug: Update taint list and use upstream descriptions * [rt] Refresh "serial: 8250: implement non-BKL console" * [amd64] mm: Enable MEMORY_HOTPLUG_DEFAULT_ONLINE: Enable Online the newly added memory blocks by default (Closes: #1049901) * [hppa] Add build-dependency on binutils-dev to get bfd.h and thus allow disassembly of jitted programs in bpftool * [riscv64] enable CONFIG_ACPI * [riscv64] improve Starfive JH7110 support: enable CRYPTO_DEV_JH7110, SND_SOC, SND_SOC_STARFIVE and SND_SOC_JH7110_TDM as modules * [x86] drivers/platform/x86/lenovo-ymc: Enable LENOVO_YMC as module * [arm64] Improve support for Allwinner H6 and affiliated SoCs (Closes: #1038986) - drivers/cpufreq: Enable ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM as module - drivers/iommu: Enable SUN50I_IOMMU - drivers/media/rc: Enable IR_SUNXI as module - drivers/phy/allwinner: Enable PHY_SUN50I_USB3 as module - sound/soc/sunxi: Enable SND_SUN50I_DMIC as module Regards, Salvatore
signature.asc
Description: PGP signature