Your message dated Thu, 21 Sep 2023 12:44:25 +0200
with message-id <2701994.mvXUDI8C0e@bagend>
and subject line Re: Bug#1050117: Confirm fixed in 6.1.0-12 (6.1.52-1)
has caused the Debian Bug report #1050117,
regarding poweroff (shutdown -h) / reboot (shutdown -r) does not work properly
since 6.1.27-1
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1050117: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050117
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 6.4.4-3~bpo12+1
Severity: normal
File:
/usr/share/bug/linux-image-6.4.0-0.deb12.2-686-pae-unsigned/include-1cmdline
X-Debbugs-Cc: [email protected]
I installed bookworm into my OLD PC and found this problem.
Shutdown and reboot does not work properly. It stops after
displaying:
[ xxxx.xxxxxx] system-shutdown[1]: Powering off.
or
[ xxxx.xxxxxx] system-shutdown[1]: Rebooting.
I also noticed that the another PC of similar generation works
even with linux-image-6.1.0-11-686-pae (DELL PowerEdge 1500SC).
Full screen image is like:
[ 290.821465] EXT4-fs (sda4): unmounting filesystem.
[ 291.185022] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 291.358289] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 291.368445] systemd-journald[211]: Received SIGTERM from PID i
(systemdeshutdow).
[ 291.406307] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 291.415836] systemd-shutdown[1]: Unmounting file systems.
[ 291.420449] (sd-remount)[505]: Remounting'/' read-only with options
'errors:remount-ro'.
[ 291.431524] EXT4-fs (sda12): re-mounted. Quota mode: none.
[ 291.439996] systemd-shutdown[1]: All filesystems unmounted.
[ 291.440097] systemd-shutdown[1]: Deactivating swaps.
[ 291.440423] systemd-shutdown[1]: All swaps deactivated.
[ 291.440477] systemd-shutdown[1]: Detaching loop devices.
[ 291.444822] systemd-shutdown[1]: All loop devices detached.
[ 291.444919] systemdeshutdown[1]: Stopping MD devices.
[ 291.445354] systemd-shutdown[1]: All MD devices stopped.
[ 291.445406] systemd-shutdown[1]: Detaching DM devices.
[ 291.445753] systemd-shutdown[1]: All DM devices detached.
[ 291.445801] systemdeshutdown[1]: All filesystems, swaps, loop devices, MD
devices and DM devices detached.
[ 291.459662] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 291.461906] systemdeshutdown[1]: Powering off.
First, this happens with linux-image-6.1.0-11-686-pae.
I tried various kernel versions and the results are as follows.
linux-image-5.19.0-0.deb11.2-686-pae 5.19.11-1~bpo11+1 : OK
linux-image-6.0.0-0.deb11.2-686-pae 6.0.3-1~bpo11+1 : OK
linux-image-6.1.0-0.deb11.5-686-pae 6.1.12-1~bpo11+1 : OK
linux-image-6.1.0-0.deb11.7-686-pae 6.1.20-2~bpo11+1 : OK
linux-image-6.1.0-10-686-pae 6.1.38-2 : NG
linux-image-6.1.0-11-686-pae 6.1.38-4 : NG
linux-image-6.4.0-0.deb12.2-686-pae-unsigned 6.4.4-3~bpo12+1 : NG
linux-image-6.4.0-2-686-pae 6.4.4-3 : NG
linux-image-6.5.0-0-686-pae-unsigned 6.5~rc6-1~exp1 : NG
OK: Works without the problem.
NG: Has the problem.
It seems that kernels built for bullseye do not have this issue.
Or maybe the kernel before 6.1.0-0 works.
Please let me know if further information is necessary.
-- Package-specific info:
** Version:
Linux version 6.4.0-0.deb12.2-686-pae ([email protected]) (gcc-12
(Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP
PREEMPT_DYNAMIC Debian 6.4.4-3~bpo12+1 (2023-08-08)
** Command line:
BOOT_IMAGE=/vmlinuz-6.4.0-0.deb12.2-686-pae
root=UUID=fc774740-5be6-44f6-b87c-b6d8305d3680 ro quiet
** Tainted: DE (8320)
* kernel died recently, i.e. there was an OOPS or BUG
* unsigned module was loaded
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Mother board: MSI MS6163 VER:1 (440BX chipset)
CPU: Intel(R) Celeron(TM) CPU 1400MHz
Graphics: Nvidia FX 5900XT
** Loaded modules:
binfmt_misc(E)
sil164(E)
nouveau(E)
ppdev(E)
snd_ymfpci(E+)
saa7134(E)
tveeprom(E)
snd_ac97_codec(E)
videobuf2_dma_sg(E)
videobuf2_memops(E)
ac97_bus(E)
videobuf2_v4l2(E)
snd_mpu401_uart(E)
snd_opl3_lib(E)
snd_hwdep(E)
gameport(E)
snd_rawmidi(E)
snd_seq_device(E)
videodev(E)
mxm_wmi(E)
snd_pcm(E)
snd_timer(E)
videobuf2_common(E)
drm_display_helper(E)
pcspkr(E)
snd(E)
mc(E)
cec(E)
soundcore(E)
rc_core(E)
drm_ttm_helper(E)
ttm(E)
drm_kms_helper(E)
i2c_algo_bit(E)
parport_pc(E)
video(E)
parport(E)
wmi(E)
joydev(E)
button(E)
evdev(E)
serio_raw(E)
sg(E)
loop(E)
fuse(E)
drm(E)
efi_pstore(E)
dm_mod(E)
dax(E)
configfs(E)
ip_tables(E)
x_tables(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
crc32c_generic(E)
hid_logitech_hidpp(E)
hid_logitech_dj(E)
sd_mod(E)
t10_pi(E)
hid_generic(E)
usbhid(E)
hid(E)
crc64_rocksoft(E)
crc64(E)
crc_t10dif(E)
crct10dif_generic(E)
sr_mod(E)
crct10dif_common(E)
cdrom(E)
ata_generic(E)
ata_piix(E)
ohci_pci(E)
uhci_hcd(E)
ehci_pci(E)
ohci_hcd(E)
ehci_hcd(E)
libata(E)
psmouse(E)
usbcore(E)
scsi_mod(E)
e1000(E)
i2c_piix4(E)
scsi_common(E)
usb_common(E)
floppy(E)
fan(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: ec000000-edffffff [size=32M] [32-bit]
Prefetchable memory behind bridge: e0000000-e7ffffff [size=128M]
[32-bit]
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller,
supports bus mastering])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:07.2 USB controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel modules: i2c_piix4
00:0e.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-744B [DS-1S
Audio Controller] [1073:0010] (rev 02)
Subsystem: Yamaha Corporation DS-XG PCI Audio CODEC [1073:0010]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ef040000 (32-bit, non-prefetchable) [size=32K]
Region 1: I/O ports at e400 [size=64]
Region 2: I/O ports at e800 [size=4]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: snd_ymfpci
00:10.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet
Controller [8086:100e] (rev 02)
Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:002e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef020000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ec00 [size=64]
Expansion ROM at ee000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
Kernel modules: e1000
00:12.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video
Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Philips Semiconductors SAA7130-based TV tuner card
[1131:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ef048000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: saa7134
Kernel modules: saa7134
00:14.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035]
(rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef049000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:14.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035]
(rev 41) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef04a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:14.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller
[1033:00e0] (rev 02) (prog-if 20 [EHCI])
Subsystem: HaSoTec GmbH uPD72010x USB 2.0 Controller [0e55:2928]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at ef04b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV35 [GeForce FX
5900XT] [10de:0332] (rev a1) (prog-if 00 [VGA controller])
Subsystem: LeadTek Research Inc. NV35 [GeForce FX 5900XT] [107d:2975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x2
Kernel driver in use: nouveau
Kernel modules: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 12.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 6.4.0-0.deb12.2-686-pae (SMP w/1 CPU thread; PREEMPT)
Kernel taint flags: TAINT_DIE, TAINT_UNSIGNED_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-13
pn linux-doc-6.4 <none>
Versions of packages linux-image-6.4.0-0.deb12.2-686-pae-unsigned is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--
Takashi Yano <[email protected]>
--- End Message ---
--- Begin Message ---
Version: linux/6.1.52-1
On Thursday, 21 September 2023 12:32:37 CEST Takashi Yano wrote:
> I confirmed that the issue no longer pappens in:
> linux-image-6.1.0-12-686-pae 6.1.52-1
Thanks for reporting back! Closing bug with that version then
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
