Your message dated Fri, 17 Jan 2025 17:48:40 +0100
with message-id
<y3l7v57vrohobxrjqourve3prhog6okut3yyrze6jt4vrqwo2a@hpixout75ugv>
and subject line Re: Bug#830303: sdhci_pci: SD card reader gives error "mmc0:
error -110 whilst initialising SD card"
has caused the Debian Bug report #830303,
regarding sdhci_pci: SD card reader gives error "mmc0: error -110 whilst
initialising SD card"
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
830303: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=830303
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 4.6.2-1
Severity: normal
I have a Zotac ZBox Nano CI320 (Intel N2930), which has a built-in SD card
reader. However, it doesn't seem to be working.
I get the following dmesg errors when I insert a card:
Jul 07 17:21:06.417263 hostname kernel: mmc0: error -110 whilst initialising SD
card
Jul 07 17:21:06.521245 hostname kernel: mmc0: error -110 whilst initialising SD
card
Jul 07 17:21:06.658049 hostname kernel: mmc0: error -110 whilst initialising SD
card
Jul 07 17:21:06.805167 hostname kernel: mmc0: error -110 whilst initialising SD
card
Multiple known-good cards tested, all working in other systems.
This is what lspci says about the reader device:
00:12.0 SD Host controller: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series SDIO Controller (rev 0e) (prog-if 01)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series SDIO ControllerDisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18bit, non-prefetchable) [size=4K]
Region 0: Memory at d0817000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at d0816000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3t=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
I googled around and found a very large number of similar bugs on similar
hardware (mostly laptops). I suspect this is a driver problem.
-- Package-specific info:
** Version:
Linux version 4.6.0-1-amd64 ([email protected]) (gcc version 5.4.0
20160609 (Debian 5.4.0-4) ) #1 SMP Debian 4.6.2-1 (2016-06-15)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64
root=UUID=50ba5b42-6270-4d9f-5d9c-b7f9a121b0bd ro ipv6.disable=1 quiet
** Tainted: E (8192)
* Unsigned module has been loaded (currently expected).
** Kernel log:
[574755.247043] mmc0: error -110 whilst initialising SD card
[574755.368245] mmc0: error -110 whilst initialising SD card
[574755.502021] mmc0: error -110 whilst initialising SD card
[574755.652246] mmc0: error -110 whilst initialising SD card
** Model information
sys_vendor: Motherboard by ZOTAC
product_name: ZBOX-CI320NANO series
product_version: Rev.00
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: B219P026
board_vendor: ZOTAC
board_name: ZBOX-CI320NANO series
board_version: Rev.00
** Loaded modules:
lp(E)
parport_pc(E)
joydev(E)
st(E)
sr_mod(E)
cdrom(E)
ppdev(E)
parport(E)
xt_multiport(E)
iptable_filter(E)
ip_tables(E)
x_tables(E)
hmac(E)
drbg(E)
ansi_cprng(E)
ctr(E)
ccm(E)
bridge(E)
stp(E)
llc(E)
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
nfs(E)
lockd(E)
grace(E)
fscache(E)
sunrpc(E)
binfmt_misc(E)
snd_hda_codec_hdmi(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
arc4(E)
iwlmvm(E)
intel_rapl(E)
uvcvideo(E)
intel_soc_dts_iosf(E)
intel_powerclamp(E)
videobuf2_vmalloc(E)
videobuf2_memops(E)
kvm_intel(E)
videobuf2_v4l2(E)
snd_usb_audio(E)
i915(E)
videobuf2_core(E)
snd_usbmidi_lib(E)
videodev(E)
uas(E)
iTCO_wdt(E)
snd_rawmidi(E)
mac80211(E)
iwlwifi(E)
cfg80211(E)
media(E)
iTCO_vendor_support(E)
usb_storage(E)
snd_seq_device(E)
kvm(E)
irqbypass(E)
crct10dif_pclmul(E)
crc32_pclmul(E)
evdev(E)
ghash_clmulni_intel(E)
btusb(E)
sg(E)
drm_kms_helper(E)
btrtl(E)
pcspkr(E)
serio_raw(E)
drm(E)
hci_uart(E)
snd_intel_sst_acpi(E)
snd_intel_sst_core(E)
video(E)
btbcm(E)
btqca(E)
snd_soc_sst_mfld_platform(E)
snd_soc_rt5640(E)
dw_dmac(E)
ir_lirc_codec(E)
lirc_dev(E)
btintel(E)
bluetooth(E)
battery(E)
rc_rc6_mce(E)
nuvoton_cir(E)
8250_fintek(E)
rfkill(E)
rc_core(E)
snd_soc_sst_match(E)
snd_soc_rl6231(E)
dw_dmac_core(E)
snd_soc_core(E)
shpchp(E)
i2c_algo_bit(E)
snd_hda_intel(E)
lpc_ich(E)
i2c_designware_platform(E)
i2c_designware_core(E)
i2c_i801(E)
snd_hda_codec(E)
mfd_core(E)
snd_compress(E)
snd_hda_core(E)
snd_hwdep(E)
snd_pcm(E)
snd_timer(E)
snd(E)
soundcore(E)
button(E)
tpm_tis(E)
tpm(E)
processor(E)
nct6775(E)
hwmon_vid(E)
coretemp(E)
autofs4(E)
ext4(E)
ecb(E)
glue_helper(E)
lrw(E)
gf128mul(E)
ablk_helper(E)
cryptd(E)
aes_x86_64(E)
crc16(E)
jbd2(E)
crc32c_generic(E)
mbcache(E)
md_mod(E)
sd_mod(E)
crc32c_intel(E)
xhci_pci(E)
psmouse(E)
ahci(E)
xhci_hcd(E)
libahci(E)
libata(E)
usbcore(E)
r8169(E)
mii(E)
scsi_mod(E)
usb_common(E)
sdhci_pci(E)
fjes(E)
i2c_hid(E)
hid(E)
sdhci_acpi(E)
sdhci(E)
mmc_core(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series SoC Transaction Register [8086:0f00] (rev 0e)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series SoC Transaction Register [19da:b219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA
controller])
DeviceName: Onboard IGD
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series Graphics & Display [19da:b219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 265
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 4: I/O ports at f080 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:12.0 SD Host controller [0805]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series SDIO Controller [8086:0f16] (rev 0e) (prog-if 01)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series SDIO Controller [19da:b219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0817000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at d0816000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
00:13.0 SATA controller [0106]: Intel Corporation Atom Processor E3800 Series
SATA AHCI Controller [8086:0f23] (rev 0e) (prog-if 01 [AHCI 1.0])
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor E3800 Series
SATA AHCI Controller [19da:b219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 262
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at d0815000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx,
Celeron N2000 Series USB xHCI [19da:b219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 263
Region 0: Memory at d0800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series Trusted Execution Engine [19da:b219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at d0400000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series High Definition Audio Controller [8086:0f04] (rev 0e)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series High Definition Audio Controller [19da:b219]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 266
Region 0: Memory at d0810000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI
Express Root Port 1 [8086:0f48] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d0700000-d07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI
Express Root Port 2 [8086:0f4a] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI
Express Root Port 3 [8086:0f4c] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0600000-d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI
Express Root Port 4 [8086:0f4e] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series Power Control Unit [8086:0f1c] (rev 0e)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor Z36xxx/Z37xxx
Series Power Control Unit [19da:b219]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Atom Processor E3800 Series SMBus
Controller [8086:0f12] (rev 0e)
Subsystem: ZOTAC International (MCO) Ltd. Atom Processor E3800 Series
SMBus Controller [19da:b219]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d0814000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at f000 [size=32]
Capabilities: <access denied>
Kernel modules: i2c_i801
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
Subsystem: ZOTAC International (MCO) Ltd. RTL8111/8168/8411 PCI Express
Gigabit Ethernet Controller [19da:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 261
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at d0704000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d0700000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b3]
(rev 83)
Subsystem: Intel Corporation Dual Band Wireless-AC 3160 [8086:0070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 264
Region 0: Memory at d0600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
** USB devices:
Bus 002 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 2109:2812 VIA Labs, Inc. VL812 Hub
Bus 001 Device 002: ID 8087:07dc Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.6.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.3
Versions of packages linux-image-4.6.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.6.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-36
pn linux-doc-4.6 <none>
Versions of packages linux-image-4.6.0-1-amd64 is related to:
ii firmware-amd-graphics 20160110-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20160110-1
pn firmware-libertas <none>
ii firmware-linux-nonfree 20160110-1
ii firmware-misc-nonfree 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160110-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Hello,
On Wed, Jan 08, 2025 at 08:28:14PM +0100, Jmkr wrote:
> Here is attached some more info about using the workaround mentioned above on
> Acer Aspire V3-571G with Broadcom Limited BCM57765/57785 card reader.
>
> Basically this card reader never really worked reliably for me on Debian even
> with the workaround. After attempting to write even relatively small amount
> of data to an SD card the reader usually quickly failed (reading was more
> usable, but sometimes failed too). Even with later kernels problems with the
> card reader were still there (probably even on Linux 6.1 from Debian 12, but
> I guess testing with current kernels could better confirm my vague memories:).
>
> Anyway as can be deduced from timestamps in the attachments: I am no longer
> using the laptop for Debian and I only wanted to share the info collected in
> 2022 in case it helps with debugging (as I gave up on solving this problem
> back then and forgot to share my collected info).
Thanks for your input. Given it's not relevant for you any more and it's
unknown if there are other affected users and this is still an issue in
2025, I close this bug. When the problem gets relevant again, please
reopen (or report a new bug).
Best regards
Uwe
signature.asc
Description: PGP signature
--- End Message ---
