Your message dated Thu, 20 Feb 2025 15:38:38 +0100 (CET)
with message-id <[email protected]>
and subject line Closing this bug (BTS maintenance for src:linux bugs)
has caused the Debian Bug report #1065112,
regarding linux-image-6.1.0-18-amd64: System unresponsive after resume from
suspend when WoWLAN enabled in iwlwifi
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1065112: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1065112
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 6.1.76-1
Severity: normal
X-Debbugs-Cc: [email protected]
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
I am trying to get WoWLAN working on an old DELL via a PCIe WiFi card (
https://www.amazon.co.uk/dp/B0BTCNG9TD?psc=1&ref=ppx_yo2ov_dt_b_product_details
)
that uses the Intel 7265 chipset (
https://www.intel.com/content/www/us/en/products/sku/83635/intel-dual-band-wirelessac-7265/specifications.html
).
The card's result from lspci:
03:00.0 Network controller [0280]: "Intel Corporation Wireless 7265
[8086:095a] (rev 59)"
* What exactly did you do (or not do) that was effective (or
ineffective)?
1. Enabled WoWLAN with magic-packet with `iw phy0 wowlan enable magic-packet`
2. Suspend PC with `echo "mem" > /sys/power/state`
3. After suspend, press a key.
I also tried this with a pristine build of linux 6.7.6, and encountered the
same problem.
* What was the outcome of this action?
The display lit up, showing the same information as before suspend, but the
mouse and keyboard don't respond.
Magic SysRq does respond.
I found my way to seeing the kernel crash message (via preventing
console_suspend, and tweaking /proc/sys/kernel/{prink,sysrq} values),
as shown in the image at: https://imgur.com/a/E7dD0ND
Initial analysis of that photo from iam_tj[m]1 on irc #debian-kernel
(2024-02-29 19:48):
>From your photo we see
>`drivers/net/wireless/intel/iwlwifi/iwl-trans.c::iwl_trans_txq_enable_cfg()`
>report "bad state" and that is called from
>`drivers/net/wireless/intel/iwlwifi/mvm/d3.c::iwl_mvm_send_wowlan_get_status()`
> that reports "failed to query wakeup status (-5)".
>From reading the code around WoWLAN it seems a special WoWLAN firmware should
>be loaded into the device on suspend and on resume the driver is checking it
>is (still) there.
If not the driver should cause a full device reset.
`asm_exc_invalid_op` is a TRAP leading to
`arch/x86/kernel/traps.c::handle_invalid_op()` which may imply the code in RAM
has been corrupted (in the function `iwl_pcie_tx_start()` presumably).
Doesn't seem too likely though since code (.text sections) should be read-only
unless the RAM itself is faulty - but if that one wouldn't expect the same
error every time.
* What outcome did you expect instead?
The system resumes from suspend and is fully interactive (as it does when
WoWLAN is disabled).
-- Package-specific info:
** Version:
Linux version 6.1.0-18-amd64 ([email protected]) (gcc-12 (Debian
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP
PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64
root=UUID=b15802a9-4b38-4cb9-9109-fdf1cad881b0 ro quiet crashkernel=384M-:128M
** Not tainted
** Kernel log:
[ 4.039828] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 4.064801] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 4.066671] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 4.066685] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 4.110654] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4,
TCOBASE=0x0400)
[ 4.112303] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.4)
[ 4.113931] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.128354] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 4.128506] cfg80211: Loaded X.509 cert '[email protected]:
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 4.128645] cfg80211: Loaded X.509 cert '[email protected]:
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 4.128783] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.128917] cfg80211: Loaded X.509 cert 'wens:
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 4.133009] platform regulatory.0: firmware: direct-loading firmware
regulatory.db
[ 4.133129] platform regulatory.0: firmware: direct-loading firmware
regulatory.db.p7s
[ 4.133616] input: Dell WMI hotkeys as
/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[ 4.154628] Intel(R) Wireless WiFi driver for Linux
[ 4.166726] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround
enabled
[ 4.166880] iwlwifi 0000:03:00.0: enabling device (0100 -> 0102)
[ 4.169833] iwlwifi 0000:03:00.0: firmware: direct-loading firmware
iwlwifi-7265D-29.ucode
[ 4.169856] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
[ 4.169857] iwlwifi 0000:03:00.0: Found debug configuration: 0
[ 4.170045] iwlwifi 0000:03:00.0: loaded firmware version 29.4063824552.0
7265D-29.ucode op_mode iwlmvm
[ 4.184779] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
[ 4.187148] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms
ovfl timer
[ 4.187150] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.187151] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.187151] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.187152] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.189485] cryptd: max_cpu_qlen set to 1000
[ 4.198676] AVX2 version of gcm_enc/dec engaged.
[ 4.198702] AES CTR mode by8 optimization enabled
[ 4.204401] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 4.264476] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC
7265, REV=0x210
[ 4.264703] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 4.287825] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 4.288137] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware
monitor.
[ 4.292573] iwlwifi 0000:03:00.0: base HW address: 98:43:fa:68:6c:30, OTP
minor version: 0x0
[ 4.292779] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3234:
line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 4.292783] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 4.292785] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 4.292787] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.292788] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.292789] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 4.292790] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 4.354380] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.358756] intel_rapl_common: Found RAPL domain package
[ 4.358758] intel_rapl_common: Found RAPL domain core
[ 4.358760] intel_rapl_common: Found RAPL domain uncore
[ 4.358761] intel_rapl_common: Found RAPL domain dram
[ 4.384671] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 4.673925] BTRFS info (device sda): first mount of filesystem
627a8e1c-6e69-4af6-a231-01976a80f6ae
[ 4.673949] BTRFS info (device sda): using crc32c (crc32c-intel) checksum
algorithm
[ 4.673960] BTRFS info (device sda): using free space tree
[ 4.794108] audit: type=1400 audit(1709239155.743:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=610
comm="apparmor_parser"
[ 4.795702] audit: type=1400 audit(1709239155.743:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=611
comm="apparmor_parser"
[ 4.795713] audit: type=1400 audit(1709239155.743:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=611 comm="apparmor_parser"
[ 4.812151] audit: type=1400 audit(1709239155.759:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=614
comm="apparmor_parser"
[ 4.817780] audit: type=1400 audit(1709239155.767:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=612
comm="apparmor_parser"
[ 4.817793] audit: type=1400 audit(1709239155.767:7): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=612 comm="apparmor_parser"
[ 4.817800] audit: type=1400 audit(1709239155.767:8): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=612 comm="apparmor_parser"
[ 4.817806] audit: type=1400 audit(1709239155.767:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient"
pid=612 comm="apparmor_parser"
[ 4.820090] audit: type=1400 audit(1709239155.767:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=615
comm="apparmor_parser"
[ 4.899000] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 4.899669] input: HDA Intel PCH Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 4.899888] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 4.900941] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 4.901815] input: HDA Intel PCH HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 4.902755] input: HDA Intel PCH HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 12.972154] kauditd_printk_skb: 16 callbacks suppressed
[ 12.972160] audit: type=1400 audit(1709239163.919:27): apparmor="DENIED"
operation="capable" profile="/usr/sbin/cupsd" pid=3701 comm="cupsd"
capability=12 capname="net_admin"
[ 13.035891] NET: Registered PF_QIPCRTR protocol family
[ 13.392485] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 13.470314] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 13.471436] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 13.548359] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 13.626023] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
[ 13.627196] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
[ 16.802828] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: Rx/Tx
[ 16.802899] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 17.394243] wlp3s0: authenticate with 4c:22:f3:aa:0a:c3
[ 17.394269] wlp3s0: 80 MHz not supported, disabling VHT
[ 17.439194] wlp3s0: send auth to 4c:22:f3:aa:0a:c3 (try 1/3)
[ 17.441336] wlp3s0: authenticated
[ 17.444294] wlp3s0: associate with 4c:22:f3:aa:0a:c3 (try 1/3)
[ 17.448386] wlp3s0: RX AssocResp from 4c:22:f3:aa:0a:c3 (capab=0x1411
status=0 aid=3)
[ 17.454994] wlp3s0: associated
[ 17.624456] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by
4c:22:f3:aa:0a:c3
[ 17.640604] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 17.691007] rfkill: input handler disabled
[ 27.115364] rfkill: input handler enabled
[ 31.071014] rfkill: input handler disabled
[ 34.056885] wlp3s0: disconnect from AP 4c:22:f3:aa:0a:c3 for new auth to
4c:22:f3:aa:0a:c2
[ 34.125550] wlp3s0: authenticate with 4c:22:f3:aa:0a:c2
[ 34.131140] wlp3s0: send auth to 4c:22:f3:aa:0a:c2 (try 1/3)
[ 34.134678] wlp3s0: authenticated
[ 34.140292] wlp3s0: associate with 4c:22:f3:aa:0a:c2 (try 1/3)
[ 34.141995] wlp3s0: RX ReassocResp from 4c:22:f3:aa:0a:c2 (capab=0x1011
status=0 aid=1)
[ 34.143766] wlp3s0: associated
[ 34.147629] wlp3s0: Limiting TX power to 19 (20 - 1) dBm as advertised by
4c:22:f3:aa:0a:c2
[ 40.188417] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 7040
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 1.24.0
board_vendor: Dell Inc.
board_name: 0HD5W2
board_version: A00
** Loaded modules:
ctr
ccm
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
qrtr
cpuid
snd_hda_codec_hdmi
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
snd_ctl_led
kvm
irqbypass
ghash_clmulni_intel
iwlmvm
sha512_ssse3
sha512_generic
snd_hda_codec_realtek
sha256_ssse3
sha1_ssse3
snd_hda_codec_generic
mac80211
aesni_intel
crypto_simd
cryptd
rapl
libarc4
snd_hda_intel
snd_intel_dspcfg
snd_intel_sdw_acpi
intel_cstate
iwlwifi
ledtrig_audio
intel_uncore
dell_wmi
snd_hda_codec
mei_hdcp
mei_wdt
sparse_keymap
snd_hda_core
snd_hwdep
dell_smbios
snd_pcm
dcdbas
iTCO_wdt
cfg80211
dell_wmi_descriptor
wmi_bmof
ee1004
pcspkr
snd_timer
intel_pmc_bxt
iTCO_vendor_support
mei_me
snd
rfkill
watchdog
soundcore
mei
intel_pch_thermal
intel_pmc_core
acpi_pad
evdev
sg
msr
parport_pc
ppdev
fuse
lp
parport
dm_mod
efi_pstore
loop
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
btrfs
blake2b_generic
xor
raid6_pq
zstd_compress
libcrc32c
crc32c_generic
i915
hid_generic
usbhid
sr_mod
hid
cdrom
sd_mod
drm_buddy
i2c_algo_bit
drm_display_helper
nvme
cec
nvme_core
rc_core
t10_pi
ttm
ahci
drm_kms_helper
libahci
crc64_rocksoft
crc64
crc_t10dif
xhci_pci
crc32_pclmul
xhci_hcd
crc32c_intel
crct10dif_generic
libata
drm
i2c_i801
e1000e
i2c_smbus
usbcore
scsi_mod
crct10dif_pclmul
crct10dif_common
scsi_common
usb_common
fan
video
wmi
button
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: enp0s31f6: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state
DOWN group default qlen 1000
link/ether 64:00:6a:8e:9a:7f brd ff:ff:ff:ff:ff:ff
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether 98:43:fa:68:6c:30 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.204/24 brd 192.168.1.255 scope global dynamic noprefixroute
wlp3s0
valid_lft 85378sec preferred_lft 85378sec
inet6 fe80::da96:b5fd:9e3:c29a/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 4890 43 0 0 0 0 0 0 4890
43 0 0 0 0 0 0
enp0s31f6: 1664 7 0 0 0 0 0 4 3460
21 0 0 0 0 0 0
wlp3s0: 7943550 9775 0 0 0 0 0 0 2006794
5646 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th
Gen Core Processor Host Bridge/DRAM Registers [8086:191f] (rev 07)
Subsystem: Dell Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host
Bridge/DRAM Registers [1028:06b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
Capabilities: <access denied>
Kernel driver in use: skl_uncore
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe
Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Subsystem: Dell 6th-10th Gen Core Processor PCIe Controller (x16)
[1028:06b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 122
IOMMU group: 2
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530
[8086:1912] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Dell HD Graphics 530 [1028:06b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 133
IOMMU group: 0
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset
Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Dell 100 Series/C230 Series Chipset Family USB 3.0 xHCI
Controller [1028:06b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 126
IOMMU group: 3
Region 0: Memory at f7230000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230
Series Chipset Family Thermal Subsystem [8086:a131] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Thermal Subsystem
[1028:06b9]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
IOMMU group: 3
Region 0: Memory at f724f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230
Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family MEI Controller
[1028:06b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 134
IOMMU group: 4
Region 0: Memory at f724e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 100 Series/C230 Series
Chipset Family KT Redirection [8086:a13d] (rev 31) (prog-if 02 [16550])
Subsystem: Dell 100 Series/C230 Series Chipset Family KT Redirection
[1028:06b9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
IOMMU group: 4
Region 0: I/O ports at f0a0 [size=8]
Region 1: Memory at f724d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:17.0 SATA controller [0106]: Intel Corporation
Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
[8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA
Controller [AHCI Mode] [1028:06b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 127
IOMMU group: 5
Region 0: Memory at f7248000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at f724c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f724b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #17 [8086:a167] (rev f1) (prog-if 00 [Normal
decode])
Subsystem: Dell 100 Series/C230 Series Chipset Family PCI Express Root
Port [1028:06b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 123
IOMMU group: 6
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: f7100000-f71fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal
decode])
Subsystem: Dell 100 Series/C230 Series Chipset Family PCI Express Root
Port [1028:06b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 124
IOMMU group: 7
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: f7000000-f70fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Q170 Chipset LPC/eSPI Controller
[8086:a146] (rev 31)
Subsystem: Dell Q170 Chipset LPC/eSPI Controller [1028:06b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 8
00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series
Chipset Family Power Management Controller [8086:a121] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family Power Management
Controller [1028:06b9]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
IOMMU group: 8
Region 0: Memory at f7244000 (32-bit, non-prefetchable) [disabled]
[size=16K]
00:1f.3 Audio device [0403]: Intel Corporation 100 Series/C230 Series Chipset
Family HD Audio Controller [8086:a170] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family HD Audio
Controller [1028:06b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 136
IOMMU group: 8
Region 0: Memory at f7240000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at f7220000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family
SMBus [8086:a123] (rev 31)
Subsystem: Dell 100 Series/C230 Series Chipset Family SMBus [1028:06b9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
IOMMU group: 8
Region 0: Memory at f724a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2)
I219-LM [8086:15b7] (rev 31)
Subsystem: Dell Ethernet Connection (2) I219-LM [1028:06b9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 125
IOMMU group: 9
Region 0: Memory at f7200000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
02:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe
SSD Controller SM951/PM951 [144d:a802] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd PM963 2.5" NVMe PCIe SSD
[144d:a801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 10
Region 0: Memory at f7100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a]
(rev 59)
Subsystem: Intel Corporation Dual Band Wireless-AC 7265 [Stone Peak 2
AC] [8086:9010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 135
IOMMU group: 11
Region 0: Memory at f7000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 001 Device 002: ID 04f2:0402 Chicony Electronics Co., Ltd Genius LuxeMate
i200 Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.1.0-18-amd64 (SMP w/4 CPU threads; PREEMPT)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.1.0-18-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-18-amd64 recommends:
ii apparmor 3.0.8-3
ii firmware-linux-free 20200122-1
Versions of packages linux-image-6.1.0-18-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.06-13+deb12u1
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-18-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20230210-5
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20230210-5
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Hi
This bug was filed for a very old kernel or the bug is old itself
without resolution.
If you can reproduce it with
- the current version in unstable/testing
- the latest kernel from backports
please reopen the bug, see https://www.debian.org/Bugs/server-control
for details.
Regards,
Salvatore
--- End Message ---
