Bug#1130909: marked as done (hp_bioscfg: Returned error 0x3, "Invalid command value/Feature not supported" (_SB.WMID.WQBE))

Debian Bug Tracking System Mon, 13 Apr 2026 20:18:14 -0700

Your message dated Tue, 14 Apr 2026 03:13:06 +0000
with message-id <[email protected]>
and subject line Bug#1127612: fixed in linux 7.0-1~exp1
has caused the Debian Bug report #1127612,
regarding hp_bioscfg: Returned error 0x3, "Invalid command value/Feature not 
supported" (_SB.WMID.WQBE)
to be marked as done.


This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
1127612: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1127612
Debian Bug Tracking System
Contact [email protected] with problems

--- Begin Message ---
Package: src:linux
Version: 6.12.74-2
Severity: normal

Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?

The new hp-bioscfg kernel module, I think.

https://ftp.ext.hp.com/pub/caps-softpaq/cmit/HP_BCU.html

https://www.phoronix.com/news/HP-BIOSCFG-For-Linux-6.6
And since my computer is an older laptop, the BIOS is also outdated and can't
be updated. The two might be causing the problem.

For a long time, I used a third-party kernel (Liquorix), but with its latest
version, the system would freeze whenever I played a YouTube video at 720p or
higher resolution. I reported the bug to them:
https://github.com/damentz/liquorix-package/issues/217

Returning to the Debian stable kernel and the backports kernel, the system
didn’t freeze… but it produced these messages (dmesg / journactl) with hp-
bioscfg modul, and WMI:

[ 10.095463] RIP: 0010:__alloc_pages_noprof+0x2a7/0x310
[ 10.095467] Code: 24 08 e9 6d fe ff ff e8 87 3a fa ff e9 92 fe ff ff 83 fe
0a 0f 86 d6 fd ff ff 80 3d f3 cd a7 01 00 75 09 c6 05 ea cd a7 01 01 <0f> 0b 45
31 ff e9 ef fe ff ff f7 c1 00 00 08 00 75 4a 89 de 40 80
[ 10.095471] RSP: 0018:ffffd390c0733ac8 EFLAGS: 00010246
[ 10.095474] RAX: 0000000000000000 RBX: 0000000000040dc0 RCX:
0000000000000000
[ 10.095477] RDX: 0000000000000000 RSI: 000000000000000b RDI:
0000000000040dc0
[ 10.095479] RBP: 000000000000000b R08: 0000000000000000 R09:
0000000000380037
[ 10.095481] R10: ffffd390c0733c28 R11: ffff8b2fc45d6960 R12:
0000000000000000
[ 10.095484] R13: ffffffffffffffff R14: 0000000000000000 R15:
0000000000000dc0
[ 10.095486] FS: 00007f0726841980(0000) GS:ffff8b30f6b80000(0000)
knlGS:0000000000000000
[ 10.095489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 10.095491] CR2: 00007fe5033f4b10 CR3: 000000010a7de003 CR4:
00000000001726f0
[ 10.095494] Call Trace:
[ 10.095497] <TASK>
[ 10.095504] alloc_pages_mpol_noprof+0xd7/0x1c0
[ 10.095513] ? hp_alloc_enumeration_data+0x2e/0x60 [hp_bioscfg]
[ 10.095526] ___kmalloc_large_node+0x87/0xa0
[ 10.095532] __kmalloc_large_node_noprof+0x1d/0xa0
[ 10.095537] __kmalloc_noprof+0x2d6/0x400
[ 10.095542] ? hp_alloc_enumeration_data+0x2e/0x60 [hp_bioscfg]
[ 10.095550] hp_alloc_enumeration_data+0x2e/0x60 [hp_bioscfg]
[ 10.095558] hp_init_bios_attributes+0x51/0x33f [hp_bioscfg]
[ 10.095568] hp_init+0x1ad/0xff0 [hp_bioscfg]
[ 10.095576] ? __pfx_hp_init+0x10/0x10 [hp_bioscfg]
[ 10.095583] do_one_initcall+0x5b/0x310
[ 10.095590] do_init_module+0x60/0x230
[ 10.095596] init_module_from_file+0x89/0xe0
[ 10.095603] idempotent_init_module+0x11e/0x310
[ 10.095609] __x64_sys_finit_module+0x5e/0xb0
[ 10.095614] do_syscall_64+0x82/0x190
[ 10.095619] ? arch_exit_to_user_mode_prepare.isra.0+0x77/0xa0
[ 10.095624] ? syscall_exit_to_user_mode+0x37/0x1b0
[ 10.095628] ? do_syscall_64+0x8e/0x190
[ 10.095630] ? arch_exit_to_user_mode_prepare.isra.0+0x77/0xa0
[ 10.095635] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 10.095640] RIP: 0033:0x7f0726b1a7b9
[ 10.095658] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89
f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 27 66 0d 00 f7 d8 64 89 01 48
[ 10.095661] RSP: 002b:00007ffd989bfeb8 EFLAGS: 00000246 ORIG_RAX:
0000000000000139
[ 10.095665] RAX: ffffffffffffffda RBX: 000055d83c9800f0 RCX:
00007f0726b1a7b9
[ 10.095668] RDX: 0000000000000004 RSI: 00007f072715144d RDI:
000000000000001a
[ 10.095670] RBP: 0000000000000004 R08: 0000000000000000 R09:
000055d83c862620
[ 10.095672] R10: 0000000000000000 R11: 0000000000000246 R12:
00007f072715144d
[ 10.095674] R13: 0000000000020000 R14: 000055d83c97bf40 R15:
0000000000000000
[ 10.095679] </TASK>
[ 10.095680] ---[ end trace 0000000000000000 ]---
[ 10.097928] ACPI Error: Aborting method \_SB.WMID.WQBE due to previous error
(AE_AML_UNINITIALIZED_ELEMENT) (20240827/psparse-529)
[ 10.100172] ACPI Error: Aborting method \_SB.WMID.WQBE due to previous error
(AE_AML_UNINITIALIZED_ELEMENT) (20240827/psparse-529)
[ 10.103398] Error expected type 2 for elem 13, but got type 1 instead
[ 10.104182] hp_bioscfg: Returned error 0x3, "Invalid command value/Feature
not supported"


# hp-bioscfg

lsmod | grep hp_bioscfg
hp_bioscfg 81920 0
firmware_attributes_class 12288 1 hp_bioscfg
wmi 28672 4 hp_wmi,video,hp_bioscfg,wmi_bmof

* What exactly did you do (or not do) that was effective (or
ineffective)?

I disabled the hp-bioscfg module
echo "blacklist hp_bioscfg" | sudo tee /etc/modprobe.d/hp_bioscfg-blacklist.conf
sudo update-grub

sudo systemctl reboot

* What was the outcome of this action?

The error has been resolved
márc 15 10:36:01 mst kernel: ACPI Error: Aborting method \_SB.WMID.WQBE due to
previous error (AE_AML_UNINITIALIZED_ELEMENT) >
márc 15 10:36:01 mst kernel: Error expected type 2 for elem 13, but got type 1
instead
márc 15 10:36:01 mst kernel: hp_bioscfg: Returned error 0x3, "Invalid command
value/Feature not supported"


* What outcome did you expect instead?

YouTube does not cause the system to freeze, whether the hp-bioscfg kernel
module is enabled or disabled.

When I enable the module,
sudo mv /etc/modprobe.d/hp_bioscfg-blacklist.conf /etc/modprobe.d/hp_bioscfg-blacklist.conf.ORIG
sudo systemctl reboot

an "ACPI Error" message appears.

It would be good to fix this issue.
It occurred to me that maybe I don't even need the module... but that's just a
thought, and I haven't been able to confirm it.


-- Package-specific info:
** Version:
Linux version 6.12.74+deb13+1-amd64 ([email protected]) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.74-2 (2026-03-08)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.12.74+deb13+1-amd64 root=UUID=8e25da40-b64e-4195-99cf-6f37770c8a41 ro quiet
** Tainted: WOE (12800)
* kernel issued warning
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded

** Kernel log:
[ 7.582017] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.586632] iwlwifi 0000:24:00.0 wlo1: renamed from wlan0
[ 7.742027] intel_rapl_common: Found RAPL domain package
[ 7.742034] intel_rapl_common: Found RAPL domain core
[ 7.742036] intel_rapl_common: Found RAPL domain uncore
[ 7.937099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.937105] Bluetooth: BNEP filters: protocol multicast
[ 7.937111] Bluetooth: BNEP socket layer initialized
[ 7.949271] Bluetooth: MGMT ver 1.23
[ 7.970614] NET: Registered PF_ALG protocol family
[ 8.065545] Bluetooth: RFCOMM TTY layer initialized
[ 8.065553] Bluetooth: RFCOMM socket layer initialized
[ 8.065559] Bluetooth: RFCOMM ver 1.11
[ 8.210186] NET: Registered PF_QIPCRTR protocol family
[ 8.315740] vboxdrv: loading out-of-tree module taints kernel.
[ 8.315749] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 8.336211] vboxdrv: Found 4 processor cores/threads
[ 8.398673] rtR0InitNative: g_pLnxInitMm=00000000487f8127
[ 8.418150] vboxdrv: TSC mode is Invariant, tentative frequency 2594110278 Hz [ 8.418155] vboxdrv: Successfully loaded version 7.2.6 r172322 (interface 0x00340002)
[ 8.634609] VBoxNetFlt: Successfully started.
[ 8.645961] VBoxNetAdp: Successfully started.
[ 10.095266] ------------[ cut here ]------------
[ 10.095273] WARNING: CPU: 3 PID: 407 at mm/page_alloc.c:4802 __alloc_pages_noprof+0x2a7/0x310 [ 10.095282] Modules linked in: vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr rfcomm cmac algif_hash algif_skcipher af_alg bnep ip6t_REJECT nf_reject_ipv6 xt_hl ip6t_rt intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal ipt_REJECT nf_reject_ipv4 xt_LOG nf_log_syslog xt_comment nft_limit intel_powerclamp kvm_intel xt_limit xt_addrtype kvm iwldvm xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mac80211 nft_compat btusb snd_hda_codec_hdmi nf_tables irqbypass crct10dif_pclmul ghash_clmulni_intel binfmt_misc libcrc32c sha512_ssse3 snd_ctl_led libarc4 btrtl snd_hda_codec_idt snd_hda_codec_generic btintel sha256_ssse3 iwlwifi sha1_ssse3 btbcm mei_pxp snd_hda_intel btmtk aesni_intel mei_wdt snd_intel_dspcfg snd_intel_sdw_acpi bluetooth mei_hdcp snd_hda_codec gf128mul cfg80211 hp_bioscfg(+) crypto_simd snd_hda_core firmware_attributes_class cryptd ecdh_generic snd_hwdep rapl intel_cstate snd_pcm intel_uncore hp_wmi sparse_keymap snd_timer wmi_bmof platform_profile pcspkr mei_me snd rfkill mei soundcore [ 10.095378] tpm_infineon hp_accel lis3lv02d ac joydev evdev sg coretemp msr parport_pc ppdev lp parport efi_pstore configfs nfnetlink ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic hid_generic usbhid hid i915 drm_buddy sr_mod i2c_algo_bit cdrom drm_display_helper sd_mod xhci_pci xhci_hcd ehci_pci cec sdhci_pci ehci_hcd rc_core cqhci ttm iTCO_wdt sdhci usbcore intel_pmc_bxt drm_kms_helper psmouse iTCO_vendor_support ahci mmc_core watchdog libahci libata crc32_pclmul crc32c_intel drm serio_raw usb_common scsi_mod e1000e scsi_common lpc_ich video wmi battery button [ 10.095452] CPU: 3 UID: 0 PID: 407 Comm: (udev-worker) Tainted: G OE 6.12.74+deb13+1-amd64 #1 Debian 6.12.74-2
[ 10.095458] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 10.095460] Hardware name: Hewlett-Packard HP EliteBook 2570p/17DF, BIOS 68ISB Ver. F.31 10/01/2012
[ 10.095463] RIP: 0010:__alloc_pages_noprof+0x2a7/0x310
[ 10.095467] Code: 24 08 e9 6d fe ff ff e8 87 3a fa ff e9 92 fe ff ff 83 fe 0a 0f 86 d6 fd ff ff 80 3d f3 cd a7 01 00 75 09 c6 05 ea cd a7 01 01 <0f> 0b 45 31 ff e9 ef fe ff ff f7 c1 00 00 08 00 75 4a 89 de 40 80
[ 10.095471] RSP: 0018:ffffd390c0733ac8 EFLAGS: 00010246
[ 10.095474] RAX: 0000000000000000 RBX: 0000000000040dc0 RCX: 0000000000000000 [ 10.095477] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0 [ 10.095479] RBP: 000000000000000b R08: 0000000000000000 R09: 0000000000380037 [ 10.095481] R10: ffffd390c0733c28 R11: ffff8b2fc45d6960 R12: 0000000000000000 [ 10.095484] R13: ffffffffffffffff R14: 0000000000000000 R15: 0000000000000dc0 [ 10.095486] FS: 00007f0726841980(0000) GS:ffff8b30f6b80000(0000) knlGS:0000000000000000
[ 10.095489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 10.095491] CR2: 00007fe5033f4b10 CR3: 000000010a7de003 CR4: 00000000001726f0
[ 10.095494] Call Trace:
[ 10.095497] <TASK>
[ 10.095504] alloc_pages_mpol_noprof+0xd7/0x1c0
[ 10.095513] ? hp_alloc_enumeration_data+0x2e/0x60 [hp_bioscfg]
[ 10.095526] ___kmalloc_large_node+0x87/0xa0
[ 10.095532] __kmalloc_large_node_noprof+0x1d/0xa0
[ 10.095537] __kmalloc_noprof+0x2d6/0x400
[ 10.095542] ? hp_alloc_enumeration_data+0x2e/0x60 [hp_bioscfg]
[ 10.095550] hp_alloc_enumeration_data+0x2e/0x60 [hp_bioscfg]
[ 10.095558] hp_init_bios_attributes+0x51/0x33f [hp_bioscfg]
[ 10.095568] hp_init+0x1ad/0xff0 [hp_bioscfg]
[ 10.095576] ? __pfx_hp_init+0x10/0x10 [hp_bioscfg]
[ 10.095583] do_one_initcall+0x5b/0x310
[ 10.095590] do_init_module+0x60/0x230
[ 10.095596] init_module_from_file+0x89/0xe0
[ 10.095603] idempotent_init_module+0x11e/0x310
[ 10.095609] __x64_sys_finit_module+0x5e/0xb0
[ 10.095614] do_syscall_64+0x82/0x190
[ 10.095619] ? arch_exit_to_user_mode_prepare.isra.0+0x77/0xa0
[ 10.095624] ? syscall_exit_to_user_mode+0x37/0x1b0
[ 10.095628] ? do_syscall_64+0x8e/0x190
[ 10.095630] ? arch_exit_to_user_mode_prepare.isra.0+0x77/0xa0
[ 10.095635] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 10.095640] RIP: 0033:0x7f0726b1a7b9
[ 10.095658] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 66 0d 00 f7 d8 64 89 01 48 [ 10.095661] RSP: 002b:00007ffd989bfeb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 10.095665] RAX: ffffffffffffffda RBX: 000055d83c9800f0 RCX: 00007f0726b1a7b9 [ 10.095668] RDX: 0000000000000004 RSI: 00007f072715144d RDI: 000000000000001a [ 10.095670] RBP: 0000000000000004 R08: 0000000000000000 R09: 000055d83c862620 [ 10.095672] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072715144d [ 10.095674] R13: 0000000000020000 R14: 000055d83c97bf40 R15: 0000000000000000
[ 10.095679] </TASK>
[ 10.095680] ---[ end trace 0000000000000000 ]---
[ 10.097928] ACPI Error: Aborting method \_SB.WMID.WQBE due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20240827/psparse-529) [ 10.100172] ACPI Error: Aborting method \_SB.WMID.WQBE due to previous error (AE_AML_UNINITIALIZED_ELEMENT) (20240827/psparse-529)
[ 10.103398] Error expected type 2 for elem 13, but got type 1 instead
[ 10.104182] hp_bioscfg: Returned error 0x3, "Invalid command value/Feature not supported" [ 11.299950] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 15.144041] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 32.974064] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 32.991200] usb 4-4: New USB device found, idVendor=0480, idProduct=0826, bcdDevice= 0.00 [ 32.991216] usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 32.991221] usb 4-4: Product: EXTERNAL_USB
[ 32.991224] usb 4-4: Manufacturer: TOSHIBA
[ 32.991228] usb 4-4: SerialNumber: 20210610008669F
[ 33.036412] usb-storage 4-4:1.0: USB Mass Storage device detected
[ 33.036657] scsi host6: usb-storage 4-4:1.0
[ 33.036778] usbcore: registered new interface driver usb-storage
[ 33.044915] usbcore: registered new interface driver uas
[ 34.059453] scsi 6:0:0:0: Direct-Access TOSHIBA EXTERNAL_USB 0 PQ: 0 ANSI: 6
[ 34.060148] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 34.061778] sd 6:0:0:0: [sdb] Spinning up disk...
[ 35.081993] ...ready
[ 37.165130] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 37.165873] sd 6:0:0:0: [sdb] Write Protect is off
[ 37.165929] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 37.166360] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.182539] sdb: sdb1
[ 37.182851] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 217.711432] EXT4-fs (sdb1): mounted filesystem 727d577d-97d7-44b8-9603-9b1ed4092aa5 r/w with ordered data mode. Quota mode: none.
** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 2570p
product_version: A1028C1100
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68ISB Ver. F.31
board_vendor: Hewlett-Packard
board_name: 17DF
board_version: KBC Version 61.20

** Configuration for modprobe:
blacklist microcode
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
blacklist microcode
blacklist uvcvideo
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0

** Loaded modules:
uas
usb_storage
snd_seq_dummy
snd_hrtimer
snd_seq
snd_seq_device
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
qrtr
rfcomm
cmac
algif_hash
algif_skcipher
af_alg
bnep
ip6t_REJECT
nf_reject_ipv6
xt_hl
ip6t_rt
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
ipt_REJECT
nf_reject_ipv4
xt_LOG
nf_log_syslog
xt_comment
nft_limit
intel_powerclamp
kvm_intel
xt_limit
xt_addrtype
kvm
iwldvm
xt_tcpudp
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
mac80211
nft_compat
btusb
snd_hda_codec_hdmi
nf_tables
irqbypass
crct10dif_pclmul
ghash_clmulni_intel
binfmt_misc
libcrc32c
sha512_ssse3
snd_ctl_led
libarc4
btrtl
snd_hda_codec_idt
snd_hda_codec_generic
btintel
sha256_ssse3
iwlwifi
sha1_ssse3
btbcm
mei_pxp
snd_hda_intel
btmtk
aesni_intel
mei_wdt
snd_intel_dspcfg
snd_intel_sdw_acpi
bluetooth
mei_hdcp
snd_hda_codec
gf128mul
cfg80211
hp_bioscfg
crypto_simd
snd_hda_core
firmware_attributes_class
cryptd
ecdh_generic
snd_hwdep
rapl
intel_cstate
snd_pcm
intel_uncore
hp_wmi
sparse_keymap
snd_timer
wmi_bmof
platform_profile
pcspkr
mei_me
snd
rfkill
mei
soundcore
tpm_infineon
hp_accel
lis3lv02d
ac
joydev
evdev
sg
coretemp
msr
parport_pc
ppdev
lp
parport
efi_pstore
configfs
nfnetlink
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
hid_generic
usbhid
hid
i915
drm_buddy
sr_mod
i2c_algo_bit
cdrom
drm_display_helper
sd_mod
xhci_pci
xhci_hcd
ehci_pci
cec
sdhci_pci
ehci_hcd
rc_core
cqhci
ttm
iTCO_wdt
sdhci
usbcore
intel_pmc_bxt
drm_kms_helper
psmouse
iTCO_vendor_support
ahci
mmc_core
watchdog
libahci
libata
crc32_pclmul
crc32c_intel
drm
serio_raw
usb_common
scsi_mod
e1000e
scsi_common
lpc_ich
video
wmi
battery
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 1
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
DeviceName: 64
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 37
IOMMU group: 0
Region 0: Memory at d4000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
IOMMU group: 2
Region 0: Memory at d4720000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
IOMMU group: 3
Region 0: Memory at d4734000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
IOMMU group: 4
Region 0: Memory at d4700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d473a000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4060 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 5
Region 0: Memory at d4739000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
IOMMU group: 6
Region 0: Memory at d4730000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
IOMMU group: 7
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d4600000-d46fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 27
IOMMU group: 8
Bus: primary=00, secondary=02, subordinate=22, sec-latency=0
I/O behind bridge: 2000-3fff [size=8K] [16-bit]
Memory behind bridge: d0000000-d3ffffff [size=64M] [32-bit]
Prefetchable memory behind bridge: bf200000-bf3fffff [size=2M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 28
IOMMU group: 9
Bus: primary=00, secondary=23, subordinate=23, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d4500000-d45fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 29
IOMMU group: 10
Bus: primary=00, secondary=24, subordinate=24, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: d4400000-d44fffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
IOMMU group: 11
Region 0: Memory at d4738000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC Controller [8086:1e55] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 12
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
IOMMU group: 12
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4040 [size=32]
Region 5: Memory at d4737000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
23:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
IOMMU group: 13
Region 0: Memory at d4503000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at d4510000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
23:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:17df]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
IOMMU group: 13
Region 0: Memory at d4502000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci_pci
24:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0082] (rev 34)
DeviceName: WLAN
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1301]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
IOMMU group: 14
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 04f2:b2ef Chicony Electronics Co., Ltd HP HD Webcam [Fixed]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. HP Portable SoftSailing
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 1c4f:0048 SiGma Micro Usb Mouse
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 002: ID 0480:0826 Toshiba America Inc EXTERNAL_USB


-- System Information:
Debian Release: 13.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable-debug'), (500, 'proposed-updates-debug'), (500, 'stable'), (100, 'proposed-updates')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 6.12.74+deb13+1-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_WARN, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.12.74+deb13+1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.148.3
ii kmod 34.2-2
ii linux-base 4.12.1

Versions of packages linux-image-6.12.74+deb13+1-amd64 recommends:
ii apparmor 4.1.0-1

Versions of packages linux-image-6.12.74+deb13+1-amd64 suggests:
pn debian-kernel-handbook <none>
ii firmware-linux-free 20241210-2
ii grub-pc 2.12-9+deb13u1
pn linux-doc-6.12 <none>

Versions of packages linux-image-6.12.74+deb13+1-amd64 is related to:
ii firmware-amd-graphics 20260110-1~bpo13+1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
ii firmware-intel-graphics 20260110-1~bpo13+1
ii firmware-intel-misc 20250410-2
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20260110-1~bpo13+1
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
ii firmware-mediatek 20250410-2
ii firmware-misc-nonfree 20260110-1~bpo13+1
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
ii firmware-nvidia-graphics 20250410-2
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>

-- no debconf information
--- End Message ---

--- Begin Message ---

Source: linux
Source-Version: 7.0-1~exp1
Done: Ben Hutchings <[email protected]>

We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ben Hutchings <[email protected]> (supplier of updated linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Mon, 13 Apr 2026 18:00:30 +0200
Source: linux
Architecture: source
Version: 7.0-1~exp1
Distribution: experimental
Urgency: medium
Maintainer: Debian Kernel Team <[email protected]>
Changed-By: Ben Hutchings <[email protected]>
Closes: 1113728 1113996 1122357 1127612 1130971 1131166 1131431 1131546 1132155 
1132201 1132622 1132796 1132814
Changes:
 linux (7.0-1~exp1) experimental; urgency=medium
 .
   * New upstream release: https://kernelnewbies.org/Linux_7.0
     - [amd64] platform/x86: hp-bioscfg: Support allocations of larger data
       (Closes: #1127612)
     - [amd64] crypto: padlock-sha - Disable for Zhaoxin processor
       (Closes: #1113996)
     - iommu: Fix mapping check for 0x0 to avoid re-mapping it (Closes: 
#1130971)
     - bpf: Fix constant blinding for PROBE_MEM32 stores (CVE-2026-23417)
       (Closes: #1132622)
     - [loong64] KVM: Fix undefined behaviour found by UBSAN (Closes: #1131431):
       + Make kvm_get_vcpu_by_cpuid() more robust
       + Handle the case that EIOINTC's coremap is empty
       + Fix base address calculation in kvm_eiointc_regs_access()
 .
   [ Bastian Blank ]
   * Merge kernel-wedge.  This takes over maintenance of this code from the
     installer team.
   * Use non-aliases paths in udebs. (closes: #1122357)
 .
   [ Han Gao ]
   * [riscv64] Enable RTC_DRV_EFI as module
   * [riscv64] Enable SENSORS_PWM_FAN as module for Sophgo SG2042
   * [riscv64] Enable SENSORS_MR75203 as module for THEAD TH1520
   * [riscv64] Enable POWER_SEQUENCING as module for THEAD TH1520
   * [riscv64] Enable POWER_SEQUENCING_TH1520_GPU as module for THEAD TH1520
   * [riscv64] Enable SND_SOC_K1_I2S as module for Spacemit K1
   * [riscv64] Enable CONFIG_PWM_TH1520 for THEAD TH1520
 .
   [ Salvatore Bonaccorso ]
   * [amd64] drivers/platform/x86/uniwill: Enable X86_PLATFORM_DRIVERS_UNIWILL
   * [amd64] drivers/platform/x86/uniwill: Enable UNIWILL_LAPTOP as module
     (Closes: #1131166)
   * [amd64] drivers/media/i2c: Enable VIDEO_OV02E10 as module (Closes: 
#1132201)
   * [amd64] drivers/staging/media/ipu7: Enable VIDEO_INTEL_IPU7 as module
     (Closes: #1132814)
 .
   [ Ben Hutchings ]
   * Fix ordering of kernel version strings for multiple Debian revisions
     (Closes: #1113728)
   * d/b/test-patches: Expect debian/control-real target to return 0
   * d/b/test-patches: Disable signing so we build linux-image packages again
     (Closes: #1131546)
   * kernel-wedge: Fix find-dups to not look for kernel-image-di
   * kernel-wedge: Remove handling of unset $SOURCEDIR
   * kernel-wedge: Remove support for non-Linux kernels
   * kernel-wedge: Remove support for separate config directories
   * kernel-wedge: Remove support for non-modular kernel
   * kernel-wedge: Remove support for exclude-packages
   * kernel-wedge: Use cpio instead of tar in copy-files
   * kernel-wedge: Rewrite copy-files in Perl
   * kernel-wedge: Fix copy-files to skip softdeps in depmod output
   * kernel-wedge: Combine gen-deps with copy-files
   * kernel-wedge, udeb: Define which packages to build through package-list
   * [mips*,sh4] udeb: Remove minix-modules package
   * [mips*] udeb: Remove affs-modules package
   * udeb: Build {jfs,loop,ppp,squashfs,uinput,xfs}-modules everywhere we can
     (Closes: #1132155)
 .
   [ Aurelien Jarno ]
   * [riscv64] Enable SPACEMIT_K3_CCU
   * [riscv64] Enable PINCTRL_PIC64GX and PINCTRL_POLARFIRE_SOC
   * [riscv64] Enable CV1800_MBOX, SND_SOC_CV1800B_TDM,
     SND_SOC_CV1800B_ADC_CODEC and SND_SOC_CV1800B_DAC_CODEC as modules
 .
   [ Morgwai Kotarbinski ]
   * linux-kbuild: Include scripts/gen-btf.sh (Closes: #1132796)
Checksums-Sha1:
 b7c0aa04b26599087cd3b320622747e8228b7fdf 183105 linux_7.0-1~exp1.dsc
 0805573ce39c5657affaaadfe45e7e79c1b68944 160332840 linux_7.0.orig.tar.xz
 3ed69a3345ad92384c6614d59ecb2afacc744f02 1451976 linux_7.0-1~exp1.debian.tar.xz
 02d303b4cb1e903375d5f1b4e5ddfcb92231a480 6962 linux_7.0-1~exp1_source.buildinfo
Checksums-Sha256:
 d18ff76532ab4dfe10a64d6d6068c78ab750ec53b4b5860a9171945b76afc5c8 183105 
linux_7.0-1~exp1.dsc
 84aabcbd9039469613e74fd735a5e9680c1958a9ff63f093ebd9e580f403d06f 160332840 
linux_7.0.orig.tar.xz
 569e4e3e998d48247dce25aaca1dd067a83773c1b5c7961c0422154b06d6ac51 1451976 
linux_7.0-1~exp1.debian.tar.xz
 95dcfcd511aca951b67f9b2b8ed51f926fdc04e95eb7cc0578c8b2744aea2794 6962 
linux_7.0-1~exp1_source.buildinfo
Files:
 483aae11d5269bc3be731565733ae3ba 183105 kernel optional linux_7.0-1~exp1.dsc
 7ffdb1d8b58227d54d348b9bb9586821 160332840 kernel optional 
linux_7.0.orig.tar.xz
 3107a8ea51576df21d858367afb6c960 1451976 kernel optional 
linux_7.0-1~exp1.debian.tar.xz
 77feae1584d60399a450169007fdf84b 6962 kernel optional 
linux_7.0-1~exp1_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=blsv
-----END PGP SIGNATURE-----

pgpeUEAOHicOw.pgp
Description: PGP signature

--- End Message ---

Bug#1130909: marked as done (hp_bioscfg: Returned error 0x3, "Invalid command value/Feature not supported" (_SB.WMID.WQBE))

Reply via email to