Package: src:linux
Version: 5.10.251-5
Severity: important
Dear Maintainer,
Regression introduced in linux-image-5.10.0-43-amd64 (5.10.251-5).
Previous kernel linux-image-5.10.0-42-amd64 (5.10.251-4) works correctly.
Network card: Broadcom NetXtreme II BCM5716 (driver: bnx2)
Network config: /etc/network/interfaces with "allow-hotplug eno1" and "iface
eno1 inet dhcp"
On boot with 5.10.0-43, ifupdown-hotplug fails with exit code 1 and
the interface eno1 gets no IP address, making the server completely
unreachable via network.
Relevant boot log (journalctl -b):
kernel: bnx2 0000:02:00.0 eno1: renamed from eth0
systemd-udevd[289]: eno1: Process 'ifupdown-hotplug' failed with exit code 1
Workaround: boot on 5.10.0-42-amd64 via GRUB_DEFAULT in /etc/default/grub.
Note: this bug is reported from kernel 5.10.0-42 since 5.10.0-43 makes
the server unreachable at boot.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: PowerEdge R210 II
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: 2.10.0
board_vendor: Dell Inc.
board_name: 03X6X0
board_version: A02
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
allow-hotplug eno1
iface eno1 inet dhcp
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM
Controller [8086:0158] (rev 09)
Subsystem: Dell Xeon E3-1200 v2/Ivy Bridge DRAM Controller [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Capabilities: <access denied>
Kernel driver in use: ie31200_edac
Kernel modules: ie31200_edac
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: c5100000-c51fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host
Controller [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
IOMMU group: 2
Region 0: Memory at c5206000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
IOMMU group: 3
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: c0000000-c3ffffff [size=64M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host
Controller [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
IOMMU group: 4
Region 0: Memory at c5205000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 5
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: c4800000-c50fffff [size=9M]
Prefetchable memory behind bridge: 00000000c4000000-00000000c47fffff
[size=8M]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation C202 Chipset LPC Controller
[8086:1c52] (rev 04)
Subsystem: Dell C202 Chipset LPC Controller [1028:04dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 6
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port Desktop SATA AHCI Controller [8086:1c02] (rev 04) (prog-if 01
[AHCI 1.0])
Subsystem: Dell 6 Series/C200 Series Chipset Family 6 port Desktop SATA
AHCI Controller [1028:04dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
IOMMU group: 6
Region 0: I/O ports at 3048 [size=8]
Region 1: I/O ports at 3054 [size=4]
Region 2: I/O ports at 3040 [size=8]
Region 3: I/O ports at 3050 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at c5204000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family SMBus Controller
[1028:04dd]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
IOMMU group: 6
Region 0: Memory at c5202000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008
PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)
Subsystem: Dell PERC H200 Adapter [1028:1f1d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 1
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at c5140000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at c5100000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: mpt3sas
Kernel modules: mpt3sas
02:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme II
BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
DeviceName: Embedded NIC 1
Subsystem: Dell NetXtreme II BCM5716 Gigabit Ethernet [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 7
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
02:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme II
BCM5716 Gigabit Ethernet [14e4:163b] (rev 20)
DeviceName: Embedded NIC 2
Subsystem: Dell NetXtreme II BCM5716 Gigabit Ethernet [1028:04dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
IOMMU group: 7
Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
03:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA
G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
DeviceName: Embedded Video
Subsystem: Dell MGA G200eW WPCM450 [1028:04dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
IOMMU group: 5
Region 0: Memory at c4000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at c5000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at c4800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: mgag200
Kernel modules: matroxfb_base, mgag200
** USB devices:
Bus 002 Device 003: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB
2.0 Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0624:0248 Avocent Corp. Virtual Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 11.11
APT prefers oldoldstable-security
APT policy: (500, 'oldoldstable-security'), (500, 'oldoldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-42-amd64 (SMP w/4 CPU threads)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to fr_FR.UTF-8), LANGUAGE=fr_FR.UTF-8
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-43-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-43-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-43-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.06-3~deb11u6
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-43-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
ii firmware-bnx2 20210315-3
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
