Package: linux-image-2.6.17-2-686 Version: 2.6.17-9 Severity: normal So, i got a new laptop... The linux kernel used to be real nice to me on my old thinkpad, but it got stolen so now i'm with a Toshiba Satellite A30.
I can't either suspend to disk or ram. i use echo disk or echo mem > /sys/power/state to test. When suspending to disk, i get this on the console: cpufreq: suspend failed to assert current frequency is what timing core thinks it is swsusp: Need to copy 31320 pages swsusp: critical section/: done (31320 pages copied) ... CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: thermal monitoring enabled swsusp: restoring highmem cpufreq: suspend failed to assert current frequency is what timing core thinks it is ... Those were copied by hand. The cpufreq message makes me think the problem might be related to the frequency scaling drivers. Indeed, the gnome applet tells me the CPU jumps between 1.6Ghz and 3.06Ghz when scaling, when the CPU is supposed to be a 2.50Ghz. I will try disabling frequency scaling and X11 to see if that helps. I found another report[1] of this laptop having problems with ACPI, so it's very likely a problem that's been there for a while. I have started documenting[2] the fun I'm having with Debian on this laptop. I have attached a dmidecode (because I think the problem is ACPI-related) and lspci -vv (because it's always good) and a dmesg (because more is better here). The problem happens in 2.6.16, .17 and .18 (from sid). I am available for debugging and testing this to the death. Thanks, A. [1] http://web.archive.org/web/20050205233442/tiptsoft.com/laptop/linux.html [2] http://wiki.koumbit.net/TheAnarcat/ToshibaSatelliteA30 -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.17-2-686 depends on: ii initramfs-tools [linux-initra 0.80 tools for generating an initramfs ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.17-2-686 recommends: ii libc6-i686 2.3.6.ds1-4 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.17-2-686/postinst/old-initrd-link-2.6.17-2-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.17-2-686/postinst/old-dir-initrd-link-2.6.17-2-686: true linux-image-2.6.17-2-686/preinst/lilo-initrd-2.6.17-2-686: true linux-image-2.6.17-2-686/preinst/failed-to-move-modules-2.6.17-2-686: linux-image-2.6.17-2-686/postinst/depmod-error-initrd-2.6.17-2-686: false linux-image-2.6.17-2-686/postinst/create-kimage-link-2.6.17-2-686: true linux-image-2.6.17-2-686/postinst/bootloader-test-error-2.6.17-2-686: linux-image-2.6.17-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.17-2-686/prerm/removing-running-kernel-2.6.17-2-686: true linux-image-2.6.17-2-686/preinst/abort-overwrite-2.6.17-2-686: linux-image-2.6.17-2-686/preinst/already-running-this-2.6.17-2-686: linux-image-2.6.17-2-686/postinst/old-system-map-link-2.6.17-2-686: true linux-image-2.6.17-2-686/preinst/bootloader-initrd-2.6.17-2-686: true linux-image-2.6.17-2-686/preinst/initrd-2.6.17-2-686: linux-image-2.6.17-2-686/preinst/abort-install-2.6.17-2-686: linux-image-2.6.17-2-686/preinst/overwriting-modules-2.6.17-2-686: true linux-image-2.6.17-2-686/postinst/kimage-is-a-directory: linux-image-2.6.17-2-686/preinst/elilo-initrd-2.6.17-2-686: true linux-image-2.6.17-2-686/prerm/would-invalidate-boot-loader-2.6.17-2-686: true linux-image-2.6.17-2-686/postinst/depmod-error-2.6.17-2-686: false linux-image-2.6.17-2-686/postinst/bootloader-error-2.6.17-2-686: *** /tmp/dmidecode # dmidecode 2.8 SMBIOS 2.31 present. 31 structures occupying 1002 bytes. Table at 0x000DF010. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: TOSHIBA Version: V1.10 Release Date: 08/19/2003 Address: 0xE6910 Runtime Size: 104176 bytes ROM Size: 512 kB Characteristics: PCI is supported PC Card (PCMCIA) is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported Japanese floppy for Toshiba 1.2 MB is supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported IEEE 1394 boot is supported Smart battery is supported BIOS boot specification is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: TOSHIBA Product Name: Satellite A30 Version: PSA30C-00YS5 Serial Number: X3314153K UUID: 69D271BF-E313-11D7-B956-00023F93CDC8 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: TOSHIBA Product Name: DBL00 Version: Null Serial Number: 0123456789AB Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: TOSHIBA Type: Notebook Lock: Not Present Version: N/A Serial Number: None Asset Tag: No Asset Tag Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00001234 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: NWD Type: Central Processor Family: Pentium 4 Manufacturer: Intel ID: 29 0F 00 00 FF FB EB BF Signature: Type 0, Family 15, Model 2, Stepping 9 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: A0 Voltage: 1.8 V External Clock: Unknown Max Speed: 3200 MHz Current Speed: 2527 MHz Status: Populated, Enabled Upgrade: Slot 1 L1 Cache Handle: 0x0008 L2 Cache Handle: 0x0009 L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0005, DMI type 5, 22 bytes Memory Controller Information Error Detecting Method: None Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 512 MB Maximum Total Memory Size: 1536 MB Supported Speeds: Other 60 ns Supported Memory Types: DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 3 0x0006 0x0007 0x0008 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: M1 Bank Connections: 0 1 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 256 MB (Double-bank Connection) Enabled Size: 256 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: M2 Bank Connections: 2 3 Current Speed: Unknown Type: DIMM SDRAM Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OK Handle 0x0008, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 16 KB Maximum Size: 16 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 512 KB Supported SRAM Types: Burst Pipeline Burst Asynchronous Installed SRAM Type: Burst Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JP11 Internal Connector Type: 25 Pin Dual Inline (pin 26 cut) External Reference Designator: Parallel External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JP14 Internal Connector Type: None External Reference Designator: SVGA-Out External Connector Type: DB-15 female Port Type: Video Port Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JP13/JP26 Internal Connector Type: None External Reference Designator: USB External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JP23 Internal Connector Type: None External Reference Designator: 1394 External Connector Type: IEEE 1394 Port Type: Firewire (IEEE P1394) Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JP3 Internal Connector Type: None External Reference Designator: MIC_IN External Connector Type: RJ-11 Port Type: MIDI Port Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: JP5 Internal Connector Type: None External Reference Designator: HEADPHONE External Connector Type: RJ-11 Port Type: MIDI Port Handle 0x0010, DMI type 9, 13 bytes System Slot Information Designation: ENE 1410 Type: 32-bit PC Card (PCMCIA) Current Usage: Unknown Length: Other ID: Adapter 0, Socket 0 Characteristics: 5.0 V is provided 3.3 V is provided PC Card-16 is supported Cardbus is supported Hot-plug devices are supported Handle 0x0011, DMI type 10, 8 bytes On Board Device 1 Information Type: Video Status: Disabled Description: Intel MontaraGT On Board Device 2 Information Type: Sound Status: Disabled Description: Realtek ACL202 Handle 0x0012, DMI type 11, 5 bytes OEM Strings String 1: PSA30C-00YS5,C00YS5001 Handle 0x0013, DMI type 12, 5 bytes System Configuration Options Handle 0x0014, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 3 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0015, DMI type 17, 27 bytes Memory Device Array Handle: 0x0014 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 256 MB Form Factor: SODIMM Set: 1 Locator: JP21 Bank Locator: DIMM 0 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0016, DMI type 17, 27 bytes Memory Device Array Handle: 0x0014 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 512 MB Form Factor: SODIMM Set: 1 Locator: JP20 Bank Locator: DIMM 1 Type: DDR Type Detail: Synchronous Speed: Unknown Manufacturer: Not Specified Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Handle 0x0017, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0002FFFFFFF Range Size: 768 MB Physical Array Handle: 0x0014 Partition Width: 0 Handle 0x0018, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0000FFFFFFF Range Size: 256 MB Physical Device Handle: 0x0015 Memory Array Mapped Address Handle: 0x0017 Partition Row Position: 2 Handle 0x0019, DMI type 21, 7 bytes Built-in Pointing Device Type: Touch Pad Interface: PS/2 Buttons: 2 Handle 0x001A, DMI type 22, 26 bytes Portable Battery Location: 1st Battery Manufacturer: SONY Manufacture Date: 08/24/2003 Serial Number: 3658Q Name: PA3250U Chemistry: Lithium Ion Design Capacity: 3900 mWh Design Voltage: 14800 mV SBDS Version: Not Specified Maximum Error: Unknown OEM-specific Information: 0x00000000 Handle 0x001B, DMI type 32, 20 bytes System Boot Information Status: <OUT OF SPEC> Handle 0x001C, DMI type 126, 4 bytes Inactive Handle 0x001D, DMI type 127, 4 bytes End Of Table Handle 0x001E, DMI type 127, 4 bytes End Of Table *** /tmp/lspci 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at <unassigned> (32-bit, prefetchable) Capabilities: [40] Vendor Specific Information 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA]) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 177 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 1800 [size=8] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 177 Region 4: I/O ports at 1820 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 209 Region 4: I/O ports at 1840 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 193 Region 4: I/O ports at 1860 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Satellite 2430 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 201 Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: e0200000-e02fffff Prefetchable memory behind bridge: 40000000-41ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 193 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at 1810 [size=16] Region 5: Memory at 42000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at 1880 [size=32] 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 217 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic]) Subsystem: Toshiba America Info Systems Unknown device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 217 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 185 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 177 Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 40000000-41fff000 (prefetchable) Memory window 1: 44000000-45fff000 I/O window 0: 00003400-000034ff I/O window 1: 00003800-000038ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface Subsystem: D-Link System Inc Unknown device 3b08 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 177 Region 0: Memory at 44020000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at 44000000 (32-bit, non-prefetchable) [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- *** /var/log/dmesg Linux version 2.6.17-2-686 (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Wed Sep 13 16:34:10 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002dee0000 (usable) BIOS-e820: 000000002dee0000 - 000000002deeb000 (ACPI data) BIOS-e820: 000000002deeb000 - 000000002df00000 (ACPI NVS) BIOS-e820: 000000002df00000 - 0000000030000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 0MB HIGHMEM available. 734MB LOWMEM available. found SMP MP-table at 000f6ca0 On node 0 totalpages: 188128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 184032 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 TOSCPL ) @ 0x000f6c70 ACPI: RSDT (v001 TOSCPL RSDT 0x06040000 LTP 0x00000000) @ 0x2dee59da ACPI: FADT (v001 TOSCPL MONTARA 0x06040000 PTL 0x00000050) @ 0x2deeaf3c ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x2deeafb0 ACPI: DSDT (v001 TOSCPL MONTARAG 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) Built 1 zonelists Kernel command line: root=/dev/hda1 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2498.363 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 737940k/752512k available (1482k kernel code, 13996k reserved, 544k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5006.73 BogoMIPS (lpj=10013474) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed CPU0: Intel(R) Celeron(R) CPU 2.50GHz stepping 09 Total of 1 processors activated (5006.73 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 4725k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *9 ACPI: PCI Interrupt Link [LNKE] (IRQs 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *9 ACPI: PCI Interrupt Link [LNKG] (IRQs 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *9 ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:04: ioport range 0x600-0x60f has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00003400-000034ff IO window: 00003800-000038ff PREFETCH window: 40000000-41ffffff MEM window: 44000000-45ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: e0200000-e02fffff PREFETCH window: 40000000-41ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1159481213.884:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI wakeup devices: ELAN USB1 USB2 USB3 EUSB MODM ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 196k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:02:01.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 185 eth0: RealTek RTL8139 at 0x3000, 00:02:3f:93:cd:c8, IRQ 185 eth0: Identified 8139 chip type 'RTL-8101' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 hda: TOSHIBA MK3021GAS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 201, io mem 0xe0100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected hda: max request size: 128KiB hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hda6 hda7 hda8 hda9 hda10 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Attempting manual resume EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. FDC 0 is a post-1991 82077 input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 Linux agpgart interface v0.101 (c) Dave Jones Real Time Clock Driver v1.12ac parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177 Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44 agpgart: Detected an Intel 855 Chipset. agpgart: Detected 32636K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 ts: Compaq touchscreen protocol output mice: PS/2 mouse device common for all mice Yenta: ISA IRQ mask 0x0c38, PCI irq 177 Socket status: 30000020 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1f.5 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pccard: CardBus card inserted into slot 0 yenta EnE: chaning testregister 0xC9, 04 -> 04 intel8x0_measure_ac97_clock: measured 55281 usecs intel8x0: clocking to 48000 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded acx: this driver is still EXPERIMENTAL acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them running on a little-endian CPU PCI module v0.3.35 initialized, waiting for cards to probe... PCI: Enabling device 0000:03:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:03:00.0 to 64 acx: found ACX111-based wireless network card at 0000:03:00.0, irq:177, phymem1:0x44020000, phymem2:0x44000000, mem1:0xde9ec000, mem1_size:8192, mem2:0xdeb00000, mem2_size:131072 initial debug setting is 0x000A using IRQ 177 requesting firmware image 'tiacx111c16' acx: firmware image 'tiacx111c16' was not provided. Check your hotplug scripts requesting firmware image 'tiacx111' acx_write_fw (main/combined):0 acx_validate_fw (main/combined):0 cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. requesting firmware image 'tiacx111r16' acx_write_fw (radio): 0 acx_validate_fw (radio): 0 initializing max packet templates dump queue head (from card): len: 24 tx_memory_block_address: 190E0 rx_memory_block_address: 135E0 tx1_queue address: 12B14 rx1_queue address: 127D4 NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112 CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01 AntennaID:00 Len:02 Data:01 02 PowerLevelID:01 Len:02 Data:001E 000A DataRatesID:02 Len:05 Data:02 04 11 22 44 DomainID:03 Len:06 Data:10 20 30 31 32 41 ProductID:04 Len:09 Data:TI ACX100 ManufacturerID:05 Len:07 Data:TI Test get_mask 0x00004182, set_mask 0x00000000 don't know how to get sensitivity for radio type 0x16 got sensitivity value 0 got antenna value 0x4A got regulatory domain 0x10 get_mask 0x00000000, set_mask 0x00000000 - after update new ratevector: 82 84 0B 0C 12 16 18 24 2C 30 48 60 6C setting RXconfig to 2010:0FDD acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM version 0x05, uploaded firmware 'Rev 1.2.0.30' (0x03010101) creating /proc entry driver/acx_wlan0 creating /proc entry driver/acx_wlan0_diag creating /proc entry driver/acx_wlan0_eeprom creating /proc entry driver/acx_wlan0_phy acx v0.3.35: net device wlan0, driver compiled against wireless extensions 20 and Linux 2.6.17-2-686 USB module v0.3.35 initialized, probing for devices... usbcore: registered new driver acx_usb Adding 2176768k swap on /dev/hda7. Priority:-1 extents:1 across:2176768k EXT3 FS on hda1, internal journal loop: loaded (max 8 devices) acpi-cpufreq: CPU0 - ACPI performance management activated. device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe02fffff cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff cs: memory probe 0x40000000-0x41ffffff: excluding 0x40000000-0x41ffffff cs: warning: no high memory space available! cs: warning: no high memory space available! [stripping wifi scans] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
