On Fri, May 11, 2007 at 12:05:27AM -0600, Gordon Farquharson wrote: > Hi Dann > > The backported patch bugfix/ipv6-disallow-RH0-by-default.patch you > checked into the etch branch of the kernel causes the kernel to issue > the message, "Unable to handle kernel paging request at virtual > address 6261746d" (see boot log below) on the Linksys NSLU2 (arm). The > system boots successfully with all of the rest of the patches in > series 13 applied. I can still ssh to the system, but the system is > not stable. For instance, ifconfig never finishes running. Below the > boot log, I have included the active process list after running > ifconfig. > > It looks like the first version of the original patch in 2.6.20 and > 2.6.21 was broken [1], The fix for the broken patch in 2.6.21 was > committed after 2.6.21 was released [2] and is included in 2.6.21.1. I > haven't looked at your backported version enough to see if the problem > is the same as the problem described in the original patch.
Thanks a lot for testing those snapshots, I'm glad you caught this. Unfortunately, this code changed a great deal between 2.6.18 and 2.6.20 - in fact, 2.6.18 didn't support the type 2 route headers. I'll revert for now and recommit when this is resolved. -- dann frazier -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]