Package: linux-image-2.6.22-2-amd64 Version: 2.6.22-4 Severity: normal
For the Debian testing version of the snd_hda_intel kernel module, there was nothing but a hum from the speakers for the g33/ich9 Intel chipset for my ASUS P5K-V MB. After updating to the current debian unstable form of this module, I do get intelligible sound from the speakers for the first time, but there is still an audible hum which detracts from the quality of the sound. I am just using the default Alsa handling of modules since /usr/share/doc/alsa-base/README.Debian.gz seems to imply using the traditional /etc/modprobe.d/sound approach will not work for udev. In any case, I am getting intelligible sound from the speakers so I think the alsa module configuration must be okay. Here are the contents of /dev/snd crw-rw---- 1 root audio 116, 0 2007-11-12 13:24 controlC0 crw-rw---- 1 root audio 116, 32 2007-11-12 13:24 controlC1 crw-rw---- 1 root audio 116, 24 2007-11-12 13:24 pcmC0D0c crw-rw---- 1 root audio 116, 16 2007-11-12 13:24 pcmC0D0p crw-rw---- 1 root audio 116, 17 2007-11-12 13:24 pcmC0D1p crw-rw---- 1 root audio 116, 26 2007-11-12 13:24 pcmC0D2c crw-rw---- 1 root audio 116, 56 2007-11-12 13:24 pcmC1D0c crw-rw---- 1 root audio 116, 57 2007-11-12 13:24 pcmC1D1c crw-rw---- 1 root audio 116, 33 2007-11-12 13:24 timer Here are the results of amixer: Simple mixer control 'Headphone',0 Capabilities: pswitch Playback channels: Front Left - Front Right Mono: Front Left: Playback [off] Front Right: Playback [off] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Front Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-46.50dB] [off] Front Right: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Side',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-46.50dB] [off] Front Right: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-12.00dB] [on] Front Right: Capture 0 [0%] [-12.00dB] [on] Simple mixer control 'Capture',1 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 31 Front Left: Capture 0 [0%] [-12.00dB] [on] Front Right: Capture 0 [0%] [-12.00dB] [on] Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Mic' 'Front Mic' 'Line' Item0: 'Mic' Simple mixer control 'Input Source',1 Capabilities: cenum Items: 'Mic' 'Front Mic' 'Line' Item0: 'Mic' alsamixer has no master volume control, but it does have "PCM", "Front", and "Line" volume controls. The first two work to change the volume of "aplay" results, and the last two work to change the volume of "tvtime" television output from my TV card which uses a jumper cable to line-in on the sound chip to deliver the audio to the system. If you can recommend some non-default configuration I could do to reduce, the hum, let me know. Aside from the hum, snd_hda_intel from Debian unstable seems to be basically working for the first time for snd_hda_intel and the Intel g33/ICH9 chipset. I suspect the hum is just the sign of an immature Alsa device driver for this new hardware combination, but I thought a "for-the-record" bug report should be done to inform others of the status of snd_hda_intel for g33/ich9 for debian testing (nothing but hum), and debian unstable (intelligible sound for the first time, but with some hum). Alan W. Irwin -- Package-specific info: ** Version: Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Thu Aug 30 23:43:59 UTC 2007 ** Not tainted ** Kernel log: sd 2:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 Probing IDE interface ide1... device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth1 to eth0 input: PC Speaker as /class/input/input2 agpgart: Detected an Intel G33 Chipset. agpgart: Detected 7164K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 Linux video capture interface: v2.00 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:01:00.0 to 64 atl1 0000:01:00.0: version 2.0.7 ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 bttv0: Bt878 (rev 17) at 0000:04:00.0, irq: 16, latency: 64, mmio: 0xfdffe000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 1-0050: Hauppauge model 44801, rev C126, serial# 3942252 tveeprom 1-0050: tuner model is Temic 4036FY5 (idx 26, type 8) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is None (idx 0) tveeprom 1-0050: has no radio bttv0: Hauppauge eeprom indicates model#44801 bttv0: using tuner=8 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 1-0061: type set to 8 (Temic NTSC (4036 FY5)) tuner 1-0061: type set to 8 (Temic NTSC (4036 FY5)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 ..<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ok bt878: AUDIO driver version 0.0.0 loaded hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:04:00.1[A] -> GSI 16 (level, low) -> IRQ 16 bt878_probe: card id=[0x13eb0070], Unknown card. Exiting.. ACPI: PCI interrupt for device 0000:04:00.1 disabled bt878: probe of 0000:04:00.1 failed with error -22 ACPI: PCI Interrupt 0000:04:00.1[A] -> GSI 16 (level, low) -> IRQ 16 EXT3 FS on dm-0, internal journal loop: module loaded coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 6164472k swap on /dev/mapper/raven-swap_1. Priority:-1 extents:1 across:6164472k eth0: link up, 10Mbps, half-duplex, lpa 0x0000 NET: Registered protocol family 10 lo: Disabled Privacy Extensions atl1 0000:01:00.0: eth1 link is up 100 Mbps full duplex input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) eth0: no IPv6 routers present eth1: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0 set status page addr 0x00033000 bttv0: PLL can sleep, using XTAL (28636363). NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timed out, status 0000, PHY status 782d, resetting... eth0: link up, 10Mbps, half-duplex, lpa 0x0000 set status page addr 0x00033000 set status page addr 0x00033000 set status page addr 0x00033000 python[18984]: segfault at 0000000000000050 rip 00002ba036412be1 rsp 00007fff799e69a0 error 4 NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timed out, status 0000, PHY status 782d, resetting... eth0: link up, 10Mbps, half-duplex, lpa 0x0000 ** Loaded modules: Module Size Used by i915 31488 2 drm 100776 3 i915 iptable_filter 7552 1 xt_state 7040 5 ipt_MASQUERADE 8192 1 iptable_nat 12292 1 nf_nat 25260 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 24592 7 iptable_nat nf_conntrack 75356 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nfnetlink 10824 3 nf_nat,nf_conntrack_ipv4,nf_conntrack ip_tables 24680 2 iptable_filter,iptable_nat x_tables 24712 4 xt_state,ipt_MASQUERADE,iptable_nat,ip_tables button 13472 0 ac 10376 0 battery 15496 0 ipv6 296840 28 coretemp 12544 0 w83627ehf 25872 0 i2c_isa 9344 1 w83627ehf loop 23044 0 firewire_sbp2 18180 0 snd_bt87x 20612 0 bt878 16232 0 snd_hda_intel 311968 4 snd_pcm_oss 48288 0 snd_mixer_oss 21376 2 snd_pcm_oss tuner 66856 0 snd_pcm 89992 4 snd_bt87x,snd_hda_intel,snd_pcm_oss tvaudio 29724 0 snd_timer 28424 2 snd_pcm bttv 207092 2 bt878 snd 65896 10 snd_bt87x,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer video_buf 30980 1 bttv firmware_class 15360 1 bttv soundcore 13088 2 snd snd_page_alloc 14608 3 snd_bt87x,snd_hda_intel,snd_pcm ir_common 41476 1 bttv compat_ioctl32 13056 1 bttv i2c_algo_bit 10884 1 bttv tsdev 13312 0 btcx_risc 9352 1 bttv i2c_i801 13468 0 atl1 39436 0 psmouse 45468 0 tveeprom 22288 1 bttv videodev 32512 2 bttv v4l2_common 24320 5 tuner,tvaudio,bttv,compat_ioctl32,videodev v4l1_compat 16388 2 bttv,videodev i2c_core 31488 8 w83627ehf,i2c_isa,tuner,tvaudio,bttv,i2c_algo_bit,i2c_i801,tveeprom serio_raw 11780 0 intel_agp 32032 1 evdev 15232 3 pcspkr 7680 0 ext3 137232 4 jbd 68080 1 ext3 mbcache 13832 1 ext3 dm_mirror 26240 0 dm_snapshot 21320 0 dm_mod 64112 11 dm_mirror,dm_snapshot sg 41128 0 sr_mod 22564 0 cdrom 39848 1 sr_mod sd_mod 33280 3 jmicron 8576 0 [permanent] usbhid 32704 0 hid 31360 1 usbhid generic 10372 0 [permanent] ide_core 147728 2 jmicron,generic ata_piix 19844 2 firewire_ohci 22784 0 firewire_core 49472 2 firewire_sbp2,firewire_ohci crc_itu_t 6656 1 firewire_core via_rhine 30344 0 mii 10240 2 atl1,via_rhine ahci 28804 0 ata_generic 13188 0 libata 132016 3 ata_piix,ahci,ata_generic scsi_mod 164536 5 firewire_sbp2,sg,sr_mod,sd_mod,libata ehci_hcd 37900 0 uhci_hcd 29856 0 thermal 19600 1 processor 39784 1 thermal fan 9992 1 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8276] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at cc00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at fe880000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:829f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c000 [size=32] Capabilities: <access denied> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe6fb800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Region 5: I/O ports at a080 [size=16] Capabilities: <access denied> 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fb400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: I/O ports at b080 [size=16] Capabilities: <access denied> 01:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 1276 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> 02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:824f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at feafe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at feae0000 [disabled] [size=64K] Capabilities: <access denied> 02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:824f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Capabilities: <access denied> 04:00.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdffe000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> 04:00.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series [0070:13eb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> 04:02.0 Ethernet controller [0200]: VIA Technologies, Inc. VT86C100A [Rhine] [1106:3043] (rev 06) Subsystem: D-Link System Inc DFE-530TX rev A [1186:1400] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (29500ns min, 38000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at ec00 [size=128] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at fdf00000 [disabled] [size=64K] 04:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81fe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at e880 [size=128] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.22-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-2-amd64 depends on: ii e2fsprogs 1.40.2-1 ext2 file system utilities and lib ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.22-2-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-2-amd64/preinst/initrd-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/prerm/would-invalidate-boot-loader-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/preinst/already-running-this-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/preinst/bootloader-initrd-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/postinst/old-system-map-link-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/postinst/old-initrd-link-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.22-2-amd64/prerm/removing-running-kernel-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/preinst/abort-install-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/postinst/bootloader-test-error-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/preinst/lilo-initrd-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/preinst/elilo-initrd-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.22-2-amd64/preinst/failed-to-move-modules-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/postinst/old-dir-initrd-link-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/postinst/depmod-error-initrd-2.6.22-2-amd64: false linux-image-2.6.22-2-amd64/preinst/overwriting-modules-2.6.22-2-amd64: true linux-image-2.6.22-2-amd64/postinst/depmod-error-2.6.22-2-amd64: false linux-image-2.6.22-2-amd64/preinst/abort-overwrite-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/postinst/bootloader-error-2.6.22-2-amd64: linux-image-2.6.22-2-amd64/postinst/create-kimage-link-2.6.22-2-amd64: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]