Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-4 Severity: normal As the title says. The module is loaded with the options index=0 model=5stack. Reloading the module makes sound work again. Any steps to diagnose this problem?
-- Package-specific info: ** Version: Linux version 2.6.24-1-amd64 (Debian 2.6.24-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 13:47:43 UTC 2008 ** Command line: BOOT_IMAGE=(hd0,6)/boot/vmlinuz-2.6.24-1-amd64 root=/dev/sda6 ro quiet ** Not tainted ** Kernel log: usb usb4: root hub lost power or was reset PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.2 to 64 PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 307) PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 6f41) usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 100f1, writing 1fff1) PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 40, writing fe40fe40) PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 228000f0) PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100007, writing 100107) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b) PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880005, writing 2800005) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) PM: Writing back config space on device 0000:00:1f.2 at offset 9 (was 0, writing fe9fb800) PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00000, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 20a) PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing fe9fb700) PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800103) Coming out of suspend... PCI: Enabling device 0000:0c:00.0 (0000 -> 0002) PM: Writing back config space on device 0000:0c:00.0 at offset f (was 100, writing 10a) PM: Writing back config space on device 0000:0c:00.0 at offset 4 (was 0, writing fe8ff000) PM: Writing back config space on device 0000:0c:00.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100002, writing 100506) PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing fffb0000) PM: Writing back config space on device 0000:09:00.0 at offset 3 (was 0, writing 10) PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100000, writing 100506) tg3: eth0: Link is down. PM: Writing back config space on device 0000:03:01.0 at offset f (was 4020100, writing 4020105) PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 2100000, writing 2100106) PM: Writing back config space on device 0000:03:01.1 at offset f (was 200, writing 204) PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing fe4ff400) PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106) ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18 PM: Writing back config space on device 0000:03:01.2 at offset f (was 200, writing 204) PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing fe4ff600) PM: Writing back config space on device 0000:03:01.2 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106) PM: Writing back config space on device 0000:03:01.3 at offset f (was 200, writing 204) PM: Writing back config space on device 0000:03:01.3 at offset 4 (was 0, writing fe4ff700) PM: Writing back config space on device 0000:03:01.3 at offset 3 (was 800000, writing 804010) PM: Writing back config space on device 0000:03:01.3 at offset 1 (was 2100000, writing 2100106) PM: Writing back config space on device 0000:03:01.4 at offset f (was 200, writing 2ff) PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing ffffff00) PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 800000, writing 80f8ff) PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100000, writing 2100546) i8042 aux 00:01: activation not supported i8042 kbd 00:02: activation not supported ata3: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 0) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Starting disk hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected Restarting tasks ... <6>usb 1-2: USB disconnect, address 6 usb 1-2.1: USB disconnect, address 7 done. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef usb 1-2.2: USB disconnect, address 8 usb 1-2.3: USB disconnect, address 9 usb 4-2: USB disconnect, address 8 usb 1-2: new full speed USB device using uhci_hcd and address 10 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected usb 4-2: new low speed USB device using uhci_hcd and address 9 usb 4-2: configuration #1 chosen from 1 choice input: USB Optical Mouse as /class/input/input22 input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2 usb 1-2.1: new full speed USB device using uhci_hcd and address 11 usb 1-2.1: configuration #1 chosen from 1 choice usb 1-2.2: new full speed USB device using uhci_hcd and address 12 usb 1-2.2: configuration #1 chosen from 1 choice input: Broadcom Corp as /class/input/input23 input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2 usb 1-2.3: new full speed USB device using uhci_hcd and address 13 usb 1-2.3: configuration #1 chosen from 1 choice input: Broadcom Corp as /class/input/input24 input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3 ** Loaded modules: Module Size Used by iwl3945 97640 0 firmware_class 15104 1 iwl3945 mac80211 132236 1 iwl3945 cfg80211 19856 1 mac80211 arc4 6528 2 ecb 8192 2 blkcipher 11780 1 ecb hci_usb 21276 2 snd_hda_intel 362024 6 appletalk 42384 0 ax25 62204 0 ipx 33736 0 p8023 6656 1 ipx nls_utf8 6528 1 nls_iso8859_1 9728 0 nls_cp437 11392 1 vfat 17920 1 fat 58288 1 vfat i915 31104 2 drm 98856 3 i915 rfcomm 46240 2 hidp 25728 2 l2cap 29568 10 rfcomm,hidp bluetooth 65540 8 hci_usb,rfcomm,hidp,l2cap ipv6 286248 14 cpufreq_stats 10528 0 usb_storage 91968 1 fuse 53680 1 coretemp 12544 0 cpufreq_ondemand 13712 1 cpufreq_powersave 6272 0 cpufreq_userspace 9604 0 cpufreq_conservative 13320 0 acpi_cpufreq 13712 1 freq_table 9728 3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq loop 22788 0 firewire_sbp2 20624 0 joydev 17536 0 snd_pcm_oss 46624 0 snd_mixer_oss 21376 2 snd_pcm_oss i2c_i801 13852 0 snd_pcm 89352 3 snd_hda_intel,snd_pcm_oss sdhci 23172 0 snd_timer 28552 2 snd_pcm ricoh_mmc 8192 0 mmc_core 58760 1 sdhci snd 65896 13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer psmouse 45724 0 iTCO_wdt 17488 0 i2c_core 29824 1 i2c_i801 serio_raw 11908 0 pcspkr 7808 0 soundcore 13216 2 snd video 25620 0 output 8704 1 video button 13984 0 battery 19976 0 ac 11400 0 intel_agp 32288 1 snd_page_alloc 15248 2 snd_hda_intel,snd_pcm evdev 17024 11 ext3 139024 1 jbd 55976 1 ext3 mbcache 13952 1 ext3 ide_cd 44704 0 cdrom 39464 1 ide_cd ata_generic 13060 0 generic 9732 0 [permanent] sd_mod 33408 5 usbhid 35168 0 hid 41792 2 hidp,usbhid ahci 34436 3 piix 13316 0 [permanent] ide_core 144920 3 ide_cd,generic,piix libata 162736 2 ata_generic,ahci scsi_mod 170296 4 usb_storage,firewire_sbp2,sd_mod,libata firewire_ohci 24192 0 firewire_core 49472 2 firewire_sbp2,firewire_ohci crc_itu_t 6656 1 firewire_core tg3 100612 0 ehci_hcd 39692 0 uhci_hcd 30112 0 thermal 22688 1 processor 45032 4 acpi_cpufreq,thermal fan 9864 1 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at eff8 [size=8] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c) Subsystem: Dell Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f20 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe600000-fe7fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: fe500000-fe5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 6f80 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 6f60 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 6f40 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: fe400000-fe4fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 6fa0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix, generic, ata_generic 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Unknown device [1028:01f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 1275 Region 0: I/O ports at 6eb0 [size=8] Region 1: I/O ports at 6eb8 [size=4] Region 2: I/O ports at 6ec0 [size=8] Region 3: I/O ports at 6ec8 [size=4] Region 4: I/O ports at 6ee0 [size=32] Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: Dell Inspiron 1420 [1028:01f3] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI]) Subsystem: Dell Unknown device [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe4ff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01) Subsystem: Dell Unknown device [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fe4ff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12) Subsystem: Dell Unknown device [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 4 Region 0: Memory at fe4ff500 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ricoh-mmc Kernel modules: ricoh_mmc 03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) Subsystem: Dell Unknown device [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 4 Region 0: Memory at fe4ff600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12) Subsystem: Dell Unknown device [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248, Cache Line Size: 1020 bytes Interrupt: pin B routed to IRQ 4 Region 0: Memory at fe4ff700 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Subsystem: Dell Unknown device [1028:01f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1273 Region 0: Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Unknown device [8086:1020] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1274 Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 Kernel modules: iwl3945 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.24-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.24-1-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]