Package: linux-image-2.6.25-2-686 Version: 2.6.25-5 Severity: normal
Pressing the power button produces two acpi events most of the time. This makes using the event for something like hibernate quite difficult. I do not see any particular pattern in the behaviour. Pressing the power button usually produces two events but sometimes only one is produced. -- Package-specific info: ** Version: Linux version 2.6.25-2-686 (Debian 2.6.25-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Thu Jun 12 16:26:30 UTC 2008 ** Command line: root=/dev/mapper/nc4010-root ro video=radeonfb ** Not tainted ** Kernel log: [17910.246553] .max_vruntime : 0.000001 [17910.246555] .spread : 0.000000 [17910.246557] .spread0 : 0.000000 [17910.246559] .nr_running : 0 [17910.246561] .load : 0 [17910.246563] .nr_spread_over : 0 [17910.246564] [17910.246565] cfs_rq [17910.246567] .exec_clock : 0.000000 [17910.246569] .MIN_vruntime : 0.000001 [17910.246571] .min_vruntime : 3462698.548046 [17910.246573] .max_vruntime : 0.000001 [17910.246575] .spread : 0.000000 [17910.246577] .spread0 : 0.000000 [17910.246579] .nr_running : 0 [17910.246581] .load : 0 [17910.246583] .nr_spread_over : 0 [17910.246584] [17910.246585] cfs_rq [17910.246587] .exec_clock : 0.000000 [17910.246589] .MIN_vruntime : 0.000001 [17910.246591] .min_vruntime : 3462698.548046 [17910.246594] .max_vruntime : 0.000001 [17910.246596] .spread : 0.000000 [17910.246598] .spread0 : 0.000000 [17910.246600] .nr_running : 1 [17910.246601] .load : 1024 [17910.246603] .nr_spread_over : 0 [17910.246606] [17910.246607] runnable tasks: [17910.246608] task PID tree-key switches prio exec-runtime sum-exec sum-sleep [17910.246610] ---------------------------------------------------------------------------------------------------------- [17910.246619] R s2disk 22175 2528841.509814 3575934 120 0 0 0.000000 0.000000 0.000000 [17910.246626] [17910.246643] cifsd [17910.246648] [17910.246650] Restarting tasks ... done. [17910.433877] input: Power Button (FF) as /class/input/input29 [17910.466845] ACPI: Power Button (FF) [PWRF] [17910.468782] input: Sleep Button (CM) as /class/input/input30 [17910.494842] ACPI: Sleep Button (CM) [C13C] [17910.496740] input: Lid Switch as /class/input/input31 [17910.507008] ACPI: Lid Switch [C13B] [17910.528340] ACPI: PCI Interrupt 0000:00:12.2[C] -> Link [C0C6] -> GSI 10 (level, low) -> IRQ 10 [17910.530299] ehci_hcd 0000:00:12.2: EHCI Host Controller [17910.530815] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3 [17910.532699] ehci_hcd 0000:00:12.2: irq 10, io mem 0x98400000 [17910.546804] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17910.548817] usb usb3: configuration #1 chosen from 1 choice [17910.550663] hub 3-0:1.0: USB hub found [17910.550770] hub 3-0:1.0: 5 ports detected [17910.654991] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [17910.656851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [17910.658510] usb usb3: Product: EHCI Host Controller [17910.658764] usb usb3: Manufacturer: Linux 2.6.25-2-686 ehci_hcd [17910.660542] usb usb3: SerialNumber: 0000:00:12.2 [17911.998964] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [17911.999010] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [17911.999083] agpgart: Putting AGP V2 device at 0000:01:05.0 into 4x mode [17920.195368] CIFS VFS: Unexpected lookup error -112 [18042.508246] tg3: eth0: Link is down. [18044.797119] ADDRCONF(NETDEV_UP): eth0: link is not ready [18053.843828] tg3: eth0: Link is up at 100 Mbps, full duplex. [18053.843828] tg3: eth0: Flow control is on for TX and on for RX. [18053.843828] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [18064.096826] eth0: no IPv6 routers present [18592.691736] usb 3-3: new high speed USB device using ehci_hcd and address 2 [18592.796195] usb 3-3: configuration #1 chosen from 1 choice [18592.797573] usb 3-3: New USB device found, idVendor=090c, idProduct=1000 [18592.797588] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18592.797596] usb 3-3: Product: Flash Voyager [18592.797602] usb 3-3: Manufacturer: Corsair [18592.797608] usb 3-3: SerialNumber: A900000000012912 [18593.034311] Initializing USB Mass Storage driver... [18593.037841] scsi0 : SCSI emulation for USB Mass Storage devices [18593.038497] usbcore: registered new interface driver usb-storage [18593.038509] USB Mass Storage support registered. [18593.076928] usb-storage: device found at 2 [18593.076942] usb-storage: waiting for device to settle before scanning [18598.051110] usb-storage: device scan complete [18598.052751] scsi 0:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [18598.174677] Driver 'sd' needs updating - please use bus_type methods [18598.178991] sd 0:0:0:0: [sda] 15859712 512-byte hardware sectors (8120 MB) [18598.179745] sd 0:0:0:0: [sda] Write Protect is off [18598.179752] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [18598.179756] sd 0:0:0:0: [sda] Assuming drive cache: write through [18598.182489] sd 0:0:0:0: [sda] 15859712 512-byte hardware sectors (8120 MB) [18598.184921] sd 0:0:0:0: [sda] Write Protect is off [18598.184929] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [18598.184933] sd 0:0:0:0: [sda] Assuming drive cache: write through [18598.184937] sda: sda1 [18598.210786] sd 0:0:0:0: [sda] Attached SCSI removable disk [18604.055184] usb 3-3: USB disconnect, address 2 [18608.571461] CIFS VFS: Unexpected lookup error -112 [21965.262362] tg3: eth0: Link is down. [21967.686119] ADDRCONF(NETDEV_UP): eth0: link is not ready [22096.413024] tg3: eth0: Link is up at 100 Mbps, full duplex. [22096.413024] tg3: eth0: Flow control is on for TX and on for RX. [22096.413024] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [22106.555693] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by sd_mod 26072 0 usb_storage 76896 0 ehci_hcd 32620 0 button 8240 0 nls_utf8 2080 1 cifs 204148 1 nls_base 7268 2 nls_utf8,cifs binfmt_misc 11144 1 radeon 113152 2 drm 72280 3 radeon ppdev 8676 0 lp 11012 0 sbs 8544 0 sbshc 6784 1 sbs acpi_cpufreq 9260 0 cpufreq_conservative 7432 0 cpufreq_ondemand 8428 1 cpufreq_userspace 3812 0 cpufreq_stats 5216 0 freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats cpufreq_powersave 1856 0 ipv6 241956 22 loop 16708 0 joydev 11328 0 irtty_sir 6176 0 pcmcia 36044 0 sir_dev 13764 1 irtty_sir firmware_class 9088 1 pcmcia parport_pc 25860 1 irda 106200 1 sir_dev parport 33868 3 ppdev,lp,parport_pc crc_ccitt 2176 1 irda rtc 14272 0 pcspkr 3136 0 snd_ali5451 21740 1 serio_raw 6532 0 snd_ac97_codec 91300 1 snd_ali5451 ac97_bus 1952 1 snd_ac97_codec psmouse 35920 0 snd_pcm_oss 37824 0 snd_pcm 68228 3 snd_ali5451,snd_ac97_codec,snd_pcm_oss snd_mixer_oss 14880 1 snd_pcm_oss snd_seq_dummy 3780 0 container 4736 0 snd_seq_oss 28544 0 snd_seq_midi 8064 0 video 19728 0 output 3712 1 video snd_rawmidi 22528 1 snd_seq_midi snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi snd_seq 45872 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event i2c_ali15x3 7492 0 i2c_ali1535 6788 0 wmi 7880 0 snd_timer 21320 2 snd_pcm,snd_seq snd_seq_device 7564 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq battery 8448 0 snd 48772 12 snd_ali5451,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ac 4448 0 soundcore 7488 1 snd snd_page_alloc 9992 1 snd_pcm yenta_socket 24300 2 rsrc_nonstatic 11584 1 yenta_socket pcmcia_core 36436 3 pcmcia,yenta_socket,rsrc_nonstatic ati_agp 8524 1 shpchp 29716 0 pci_hotplug 26980 1 shpchp agpgart 31720 2 drm,ati_agp evdev 11328 6 ext3 120360 3 jbd 43444 1 ext3 mbcache 8260 1 ext3 dm_mirror 25316 0 dm_snapshot 17444 0 dm_mod 55656 9 dm_mirror,dm_snapshot ide_disk 13952 3 ata_generic 8004 0 libata 142288 1 ata_generic scsi_mod 138508 3 sd_mod,usb_storage,libata dock 10448 1 libata ide_pci_generic 4228 0 [permanent] ohci_hcd 21668 0 tg3 89316 0 usbcore 130032 4 usb_storage,ehci_hcd,ohci_hcd alim15x3 10156 0 [permanent] ide_core 100312 3 ide_disk,ide_pci_generic,alim15x3 thermal 19100 0 processor 39660 3 acpi_cpufreq,thermal fan 5636 0 radeonfb 96640 1 fb_ddc 2624 1 radeonfb i2c_algo_bit 5892 1 radeonfb i2c_core 22548 5 i2c_ali15x3,i2c_ali1535,radeonfb,fb_ddc,i2c_algo_bit ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] [1002:cbb2] (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at 9c000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at 98480000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: agpgart-ati Kernel modules: ati-agp 00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M] [1002:7010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=66 I/O behind bridge: 00002000-00002fff Memory behind bridge: 90000000-900fffff Prefetchable memory behind bridge: 94000000-97ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:06.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link Controller Audio Device [10b9:5451] (rev 02) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx- Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at 98080000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ALI 5451 Kernel modules: trident, snd-ali5451 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: alim7101_wdt, alim1535_wdt 00:08.0 Modem [0703]: ALi Corporation M5457 AC'97 Modem Controller [10b9:5457] Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at 98100000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3400 [size=256] Capabilities: <access denied> 00:0b.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller [1217:7114] (rev 20) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 98180000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 20000000-23fff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00:0b.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller [1217:7114] (rev 20) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 98200000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 28000000-2bfff000 (prefetchable) Memory window 1: 2c000000-2ffff000 I/O window 0: 00003c00-00003cff I/O window 1: 00004000-000040ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 00:0b.2 System peripheral [0880]: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator [1217:7110] Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at 98280000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:10.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c4) (prog-if ea) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 10 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at 3800 [size=16] Capabilities: <access denied> Kernel driver in use: ALI15x3_IDE Kernel modules: alim15x3 00:11.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: ali1535_smbus Kernel modules: alim7101_wdt, i2c-ali15x3, i2c-ali1535 00:12.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at 98300000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at 98380000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:12.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 10 Region 0: Memory at 98400000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:13.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet [14e4:165d] (rev 03) Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at 98000000 (64-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at 30000000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon IGP 330M/340M/350M [1002:4337] Subsystem: Compaq Computer Corporation Device [0e11:005a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at 90020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb Kernel modules: radeonfb -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (300, 'unstable'), (100, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-686 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.25-2-686 recommends: ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]