Package: linux-image-2.6.25-2-686 Version: 2.6.25-7 Severity: normal With recent kernels from Debian testing the process priority as it is set by /usr/bin/nice does not work anymore as described in the manual page.
Two processes of different users both obtain 50% of the CPU resources, independent of their 'nice' priority. See the following excerpts of top for two povray runs with different users on different computers (kernels). 2.6.18 behaves as expected while under 2.6.25 both processes use 50% of the CPU. CPU usage according to top (interval 30 seconds): lenny kernel 2.6.25-2-686 nice priority 0 and 0 PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10941 lutz 20 0 56928 52m 2452 R 49.0 5.2 0:38.56 povray 10943 schreurs 20 0 56896 51m 2364 R 48.9 5.2 0:35.83 povray lenny kernel 2.6.25-2-686 nice priority 0 and 19 PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 11008 lutz 20 0 56928 52m 2452 R 49.0 5.2 0:33.64 povray 11007 schreurs 39 19 56896 51m 2364 R 48.5 5.2 0:36.41 povray etch kernel 2.6.18-6-686 nice priority 0 and 0 PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1683 lutz 25 0 7656 3848 2024 R 49.6 1.5 0:35.78 povray 1686 schreurs 25 0 7656 3844 2024 R 49.6 1.5 0:33.50 povray etch kernel 2.6.18-6-686 nice priority 0 and 19 PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1918 lutz 25 0 7660 3844 2024 R 95.6 1.5 1:08.08 povray 1919 schreurs 39 19 7660 3840 2024 R 3.9 1.5 0:02.64 povray -- Package-specific info: ** Version: Linux version 2.6.25-2-686 (Debian 2.6.25-7) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 ** Command line: root=/dev/sda5 ro ** Not tainted ** Kernel log: [ 2.399927] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0080000 [ 2.403978] No dock devices found. [ 2.412469] SCSI subsystem initialized [ 2.420964] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.421143] usb usb5: configuration #1 chosen from 1 choice [ 2.421216] hub 5-0:1.0: USB hub found [ 2.421267] hub 5-0:1.0: 8 ports detected [ 2.424944] libata version 3.00 loaded. [ 2.523361] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.523361] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.523361] usb usb5: Product: EHCI Host Controller [ 2.523361] usb usb5: Manufacturer: Linux 2.6.25-2-686 ehci_hcd [ 2.523361] usb usb5: SerialNumber: 0000:00:1d.7 [ 2.523361] ata_piix 0000:00:1f.2: version 2.12 [ 2.523361] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 2.523361] ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ] [ 2.680196] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 2.680196] scsi0 : ata_piix [ 2.680196] scsi1 : ata_piix [ 2.680196] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3000 irq 14 [ 2.680196] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3008 irq 15 [ 2.954462] ata1.00: ATA-6: ST380013AS, 3.18, max UDMA/133 [ 2.954462] ata1.00: 156301488 sectors, multi 16: LBA48 [ 2.969808] ata1.00: configured for UDMA/133 [ 3.444761] ata2.00: ATAPI: _NEC DV-5800C, D9S3, max UDMA/33 [ 3.444761] ata2.01: ATAPI: _NEC DVD_RW ND-2500A, 1.06, max UDMA/33 [ 3.600048] ata2.00: configured for UDMA/33 [ 3.771338] ata2.01: configured for UDMA/33 [ 3.771338] scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.18 PQ: 0 ANSI: 5 [ 3.771338] scsi 1:0:0:0: CD-ROM _NEC DV-5800C D9S3 PQ: 0 ANSI: 5 [ 3.771762] scsi 1:0:1:0: CD-ROM _NEC DVD_RW ND-2500A 1.06 PQ: 0 ANSI: 5 [ 3.794465] Driver 'sd' needs updating - please use bus_type methods [ 3.794603] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.794667] sd 0:0:0:0: [sda] Write Protect is off [ 3.794714] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.794741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.794859] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.794921] sd 0:0:0:0: [sda] Write Protect is off [ 3.794967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.794994] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.795055] sda: sda1 sda2 sda3 < sda5<4>Driver 'sr' needs updating - please use bus_type methods [ 3.823214] sda6 sda7 > [ 3.845933] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.845933] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 3.845933] Uniform CD-ROM driver Revision: 3.20 [ 3.845933] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.846669] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 3.846784] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 3.865991] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.866063] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.866134] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 4.140950] PM: Starting manual resume from disk [ 4.175430] kjournald starting. Commit interval 5 seconds [ 4.175430] EXT3-fs: mounted filesystem with ordered data mode. [ 5.593521] udevd version 125 started [ 6.840839] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 6.906638] Linux agpgart interface v0.103 [ 7.107622] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.188342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.331115] input: PC Speaker as /class/input/input1 [ 7.377990] agpgart: Detected an Intel 865 Chipset. [ 7.378147] agpgart: Detected 8060K stolen memory. [ 7.389275] agpgart: AGP aperture is 128M @ 0xf0000000 [ 7.449497] intel_rng: FWH not detected [ 7.554962] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 7.555038] rtc0: alarms up to one month, y3k [ 7.649992] input: Power Button (FF) as /class/input/input2 [ 7.677365] ACPI: Power Button (FF) [PWRF] [ 7.677479] input: Power Button (CM) as /class/input/input3 [ 7.685543] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 7.709393] ACPI: Power Button (CM) [PWRB] [ 7.845523] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 7.845633] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 8.268235] intel8x0_measure_ac97_clock: measured 52165 usecs [ 8.268235] intel8x0: clocking to 48000 [ 8.387861] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input4 [ 8.414762] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0xf060) [ 8.414849] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.415300] parport_pc 00:0a: reported by Plug and Play ACPI [ 8.415394] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 9.578997] Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k [ 9.861920] EXT3 FS on sda5, internal journal [ 10.598536] loop: module loaded [ 258.542200] kjournald starting. Commit interval 5 seconds [ 258.542401] EXT3 FS on sda7, internal journal [ 258.542401] EXT3-fs: mounted filesystem with ordered data mode. [ 258.555590] kjournald starting. Commit interval 5 seconds [ 258.555822] EXT3 FS on sda6, internal journal [ 258.555822] EXT3-fs: mounted filesystem with ordered data mode. [ 259.938183] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 260.802888] NET: Registered protocol family 10 [ 260.803436] lo: Disabled Privacy Extensions [ 264.904655] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 266.785148] RPC: Registered udp transport module. [ 266.785202] RPC: Registered tcp transport module. [ 270.251398] [drm] Initialized drm 1.1.0 20060810 [ 270.255509] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 270.255520] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 270.255585] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 271.733026] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by i915 27744 2 drm 72280 3 i915 nfs 225128 3 lockd 59752 2 nfs nfs_acl 3520 1 nfs sunrpc 171872 15 nfs,lockd,nfs_acl autofs4 20708 3 video 19728 0 output 3712 1 video ac 4448 0 battery 8448 0 ipv6 241956 22 ext2 64712 1 loop 16708 0 snd_intel8x0 31740 0 parport_pc 25860 0 snd_ac97_codec 91300 1 snd_intel8x0 parport 33868 1 parport_pc ac97_bus 1952 1 snd_ac97_codec snd_pcm_oss 37824 0 snd_mixer_oss 14880 1 snd_pcm_oss iTCO_wdt 11204 0 container 4736 0 psmouse 35920 0 button 8240 0 snd_pcm 68228 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 21320 1 snd_pcm serio_raw 6532 0 rtc_cmos 10304 0 rtc_core 17532 1 rtc_cmos rtc_lib 2976 1 rtc_core snd 48772 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer intel_agp 25084 1 pcspkr 3136 0 soundcore 7488 1 snd snd_page_alloc 9992 2 snd_intel8x0,snd_pcm shpchp 29716 0 pci_hotplug 26980 1 shpchp rng_core 4900 0 agpgart 31720 3 drm,intel_agp i2c_i801 9520 0 evdev 11328 3 i2c_core 22548 1 i2c_i801 ext3 120360 3 jbd 43444 1 ext3 mbcache 8260 2 ext2,ext3 sg 33140 0 sr_mod 16804 0 cdrom 31872 1 sr_mod sd_mod 26072 6 ata_generic 8004 0 ata_piix 20196 5 libata 142288 2 ata_generic,ata_piix scsi_mod 138668 4 sg,sr_mod,sd_mod,libata dock 10448 1 libata floppy 53284 0 ide_pci_generic 4228 0 [permanent] ide_core 100312 1 ide_pci_generic ehci_hcd 32620 0 uhci_hcd 22352 0 usbcore 130032 3 ehci_hcd,uhci_hcd e1000 107776 0 thermal 19100 0 processor 39660 1 thermal fan 5636 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 1000 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:03.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to CSA Bridge [8086:2573] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: e0100000-e01fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1c00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 2000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at e0080000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 3000 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:101c] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 2400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: Fujitsu Siemens Computers Device [1734:1020] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 2c00 [size=256] Region 1: I/O ports at 2800 [size=64] Region 2: Memory at e0080800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at e0080400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 02:01.0 Ethernet controller [0200]: Intel Corporation 82547EI Gigabit Ethernet Controller [8086:1019] Subsystem: Fujitsu Siemens Computers Device [1734:101e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 4000 [size=32] Capabilities: <access denied> Kernel driver in use: e1000 Kernel modules: e1000 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-686 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.25-2-686 recommends: pn libc6-i686 <none> (no description available) Versions of packages linux-image-2.6.25-2-686 suggests: ii grub 0.97-46 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.25 <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686: linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686: linux-image-2.6.25-2-686/postinst/kimage-is-a-directory: linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]