Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-6
Severity: important
Hi, I'm using a MacBookPro laptop with debian sid on it.
Unfortunatelly it has no MODEM (PSTN) and during hollidays I needed one.
The bad luck is that I read on an Ubuntu forum about the modem and that
it worked, but I missread, they refered to an internal modem, not the
USB one.
So I have now this useless (in linux, on MacOSX it works) usb modem.
lsusb shows:
Bus 001 Device 005: ID 05ac:1401 Apple, Inc.
so it detects it as an Apple thing, but shows nothing more...
And here's the relevant part of "cat /proc/bus/usb/devices"
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ac ProdID=1401 Rev= 2.02
S: Manufacturer=Motorola, Inc.
S: Product=Apple USB Modem
S: SerialNumber=000000
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr= 50mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=03 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 11 Ivl=1ms
I:* If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=ff Driver=(none)
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I: If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=82(I) Atr=25(Isoc) MxPS= 24 Ivl=1ms
I:* If#= 4 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)
E: Ad=03(O) Atr=05(Isoc) MxPS= 24 Ivl=1ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
I've googled and found nothing about this modem working in linux.
I contacted Greg KH and he told me it should work with the kernel module
cdc-acm.
I've tried to modprobe cdc-acm but I can't see any /dev/ttyACM or
anything similar. So I presume the module does not work for this modem.
Furthermore, when I plug the modem dmesg shows this:
usb 1-1: new full speed USB device using uhci_hcd and address 5
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver snd-usb-audio
but does not load the cdc-acm module.
I try to modprobe it and dmesg shows:
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for
USB modems and ISDN adapters
but I find nothing under /dev that may be of use (no /dev/ttyACM0 or
/dev/cuaXX...
Any help will be appreciated.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-6) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Fri Apr 18 23:08:22 UTC
2008
** Command line:
BOOT_IMAGE=Linux2.6.24 ro root=804
** Tainted: P (1)
** Kernel log:
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beacons
unable to load wlan_scan_sta
ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
pnp: the driver 'rtc_cmos' has been registered
rtc_cmos 00:08: disabling not supported
rtc_cmos: probe of 00:08 failed with error -16
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input8
input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9
input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10
input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
hiddev96hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on
usb-0000:00:1d.2-2
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: HID 05ac:1000 as /class/input/input11
input,hidraw4: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input12
input,hidraw5: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
hda_codec: STAC922x, Apple subsys_id=106b1e00
Adding 3071992k swap on /dev/sda3. Priority:-1 extents:1 across:3071992k
EXT3 FS on sda4, internal journal
loop: module loaded
applesmc: Apple MacBook Pro detected:
applesmc: - Model with accelerometer
applesmc: - Model with light sensors and backlight
applesmc: - Model with 12 temperature sensors
applesmc: device successfully initialized (0xe0, 0x00).
applesmc: device successfully initialized.
applesmc: 2 fans found.
input: applesmc as /class/input/input13
Registered led device: smc:kbd_backlight
applesmc: driver successfully loaded.
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=507244kB.
loaded kvm module (kvm-63)
fuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sky2 eth1: enabling interface
applesmc: wait status failed: 5 != 0
applesmc: wait status failed: 5 != 0
sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth1: no IPv6 routers present
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 4-1: USB disconnect, address 2
usb 4-1: new full speed USB device using uhci_hcd and address 3
usb 4-1: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
eth1: no IPv6 routers present
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
usb 1-1: new full speed USB device using uhci_hcd and address 5
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver snd-usb-audio
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB
modems and ISDN adapters
applesmc: wait status failed: 5 != 4
applesmc: wait status failed: c != 8
sky2 eth1: Link is down.
sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
sky2 eth1: Link is down.
sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
sky2 eth1: Link is down.
** Loaded modules:
Module Size Used by
cdc_acm 21408 0
snd_usb_audio 95776 0
snd_usb_lib 22400 1 snd_usb_audio
snd_seq_dummy 8580 0
snd_seq_oss 36736 0
snd_seq_midi 13376 0
snd_seq_midi_event 12544 2 snd_seq_oss,snd_seq_midi
snd_seq 58752 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_rawmidi 30624 2 snd_usb_lib,snd_seq_midi
snd_seq_device 12948 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd_hwdep 14856 1 snd_usb_audio
tcp_diag 6272 0
inet_diag 17552 1 tcp_diag
wlan_scan_sta 18304 1
binfmt_misc 17292 1
hci_usb 21276 2
rfcomm 46240 2
l2cap 29568 9 rfcomm
bluetooth 65956 7 hci_usb,rfcomm,l2cap
ipt_ULOG 15752 1
x_tables 24712 1 ipt_ULOG
ppdev 13832 0
parport_pc 42408 0
lp 17476 0
parport 44812 3 ppdev,parport_pc,lp
snd_atiixp_modem 21516 0
snd_via82xx_modem 20492 0
snd_intel8x0m 23440 0
snd_ac97_codec 118232 3 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m
ac97_bus 6912 1 snd_ac97_codec
acpi_cpufreq 13712 1
cpufreq_ondemand 13712 0
cpufreq_stats 10528 0
freq_table 9728 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave 6272 0
cpufreq_userspace 9604 0
cpufreq_conservative 13320 0
ipv6 286248 28
fuse 53680 1
kvm_intel 39616 0
kvm 125432 1 kvm_intel
kqemu 165416 0
applesmc 29892 0
led_class 10120 1 applesmc
input_polldev 9872 1 applesmc
firewire_sbp2 20624 0
loop 22788 0
joydev 17536 0
snd_hda_intel 362024 2
snd_pcm_oss 46624 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 89352 7
snd_usb_audio,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss
snd_timer 28552 2 snd_seq,snd_pcm
usbhid 35168 0
rtc_cmos 13112 0
i2c_i801 13852 0
ath_rate_sample 18560 1
appletouch 14976 0
snd 65896 19
snd_usb_audio,snd_seq_oss,snd_seq,snd_rawmidi,snd_seq_device,snd_hwdep,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
rtc_core 24716 1 rtc_cmos
rtc_lib 7680 1 rtc_core
pcspkr 7808 0
i2c_core 29824 1 i2c_i801
iTCO_wdt 17488 0
video 25620 0
output 8704 1 video
ac 11400 0
battery 19976 0
button 13984 0
intel_agp 32288 0
ath_pci 193720 0
wlan 250272 4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 263936 3 ath_rate_sample,ath_pci
soundcore 13216 1 snd
snd_page_alloc 15248 5
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm
evdev 17024 11
ext3 139024 2
jbd 55976 1 ext3
mbcache 13952 1 ext3
dm_mirror 27008 0
dm_snapshot 21960 0
dm_mod 67832 2 dm_mirror,dm_snapshot
hid 41792 1 usbhid
ide_cd 44704 0
cdrom 39464 1 ide_cd
sd_mod 33536 4
generic 9732 0 [permanent]
piix 13316 0 [permanent]
ide_core 144920 3 ide_cd,generic,piix
ata_piix 25092 4
firewire_ohci 24192 0
firewire_core 49472 2 firewire_sbp2,firewire_ohci
crc_itu_t 6656 1 firewire_core
ehci_hcd 39692 0
ata_generic 13060 0
libata 162736 2 ata_piix,ata_generic
scsi_mod 170296 3 firewire_sbp2,sd_mod,libata
sky2 53508 0
uhci_hcd 30112 0
thermal 22688 0
processor 45032 4 acpi_cpufreq,thermal
fan 9864 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 50300000-503fffff
Prefetchable memory behind bridge: 0000000040000000-0000000047ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev
03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50404000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Sigmatel Device [8384:7680]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 50400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 50200000-502fffff
Prefetchable memory behind bridge: 0000000050500000-00000000505fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: 50100000-501fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 4c100000-500fffff
Prefetchable memory behind bridge: 0000000048000000-000000004bffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 4020 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 50405400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=32
Memory behind bridge: 4c000000-4c0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 40b0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, piix, generic
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 40c8 [size=8]
Region 1: I/O ports at 40e4 [size=4]
Region 2: I/O ports at 40c0 [size=8]
Region 3: I/O ports at 40e0 [size=4]
Region 4: I/O ports at 40a0 [size=16]
Region 5: Memory at 50405000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 02)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M56P [Radeon
Mobility X1600] [1002:71c5] (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device [106b:0080]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 50300000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 50320000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller [11ab:4362] (rev 22)
Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053 [11ab:5321]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at 50200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Expansion ROM at 50500000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
03:00.0 Network controller [0280]: Atheros Communications, Inc. AR5418
802.11a/b/g/n Wireless PCI Express Adapter [168c:0024] (rev 01)
Subsystem: Apple Computer Inc. Device [106b:0087]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 50100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath_pci, ath5k
0c:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link
Layer Controller [104c:8025] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 4c004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 4c000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.13-2 Yet Another mkInitRD
linux-image-2.6.24-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.24-1-amd64 suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
ii lilo 1:22.8-6 LInux LOader - The Classic OS load
pn linux-doc-2.6.24 <none> (no description available)
-- debconf information:
linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false
linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64:
true
linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
