Your message dated Sun, 14 Sep 2008 11:15:36 +0200 with message-id <[EMAIL PROTECTED]> and subject line Re: Bug#496195: linux-image-2.6.25-2-686: BIOS Bug: MCFG area at e0000000 is not E820-reserved on Asus Eee PC 900 has caused the Debian Bug report #496195, regarding linux-image-2.6.25-2-686: BIOS Bug: MCFG area at e0000000 is not E820-reserved on Asus Eee PC 900 to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 496195: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=496195 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems
--- Begin Message ---Package: linux-image-2.6.25-2-686 Version: 2.6.25-7 Severity: normal I see this message on startup. The similar bug was reported as #480513 and is marked as fixed. Also, sometimes my EeePC hangs unexpectedly and I have to restart it by holding down the power button. Can this be a kernel bug or it's a hardware problem? I didn't see this on natively installed Xandros. -- Package-specific info: ** Version: Linux version 2.6.25-2-686 (Debian 2.6.25-7) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 ** Command line: root=/dev/sda1 ro clocksource=hpet elevator=noop quiet splash vga=788 ** Tainted: P (1) ** Kernel log: [ 4.039750] sd 1:0:1:0: [sdb] Write Protect is off [ 4.039754] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.039799] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.039804] sdb: sdb1 [ 4.045597] sd 1:0:1:0: [sdb] Attached SCSI disk [ 4.229668] usb 5-5: new high speed USB device using ehci_hcd and address 2 [ 4.271982] kjournald starting. Commit interval 5 seconds [ 4.272001] EXT3-fs: mounted filesystem with ordered data mode. [ 4.355933] usb 5-5: configuration #1 chosen from 1 choice [ 4.356379] scsi3 : SCSI emulation for USB Mass Storage devices [ 4.356618] usb 5-5: New USB device found, idVendor=0951, idProduct=1606 [ 4.356625] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 4.356630] usb 5-5: Product: UB6225 [ 4.356633] usb 5-5: Manufacturer: ENE [ 4.356637] usb 5-5: SerialNumber: 146030377350 [ 4.356658] usb-storage: device found at 2 [ 4.356662] usb-storage: waiting for device to settle before scanning [ 4.812068] udevd version 125 started [ 6.574559] Linux agpgart interface v0.103 [ 6.616699] agpgart: Detected an Intel 915GM Chipset. [ 6.616903] agpgart: Detected 7932K stolen memory. [ 6.636456] agpgart: AGP aperture is 256M @ 0xd0000000 [ 7.017549] Atheros(R) L2 Ethernet Driver - version 2.0.3 [ 7.017556] Copyright (c) 2007 Atheros Corporation. [ 7.017607] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 7.017622] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 7.220274] ath_hal: module license 'Proprietary' taints kernel. [ 7.269095] ath_hal: 0.10.2.2-ATHEROS (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425) [ 7.452550] wlan: trunk [ 7.506439] input: Power Button (FF) as /class/input/input1 [ 7.530231] ACPI: Power Button (FF) [PWRF] [ 7.530378] input: Lid Switch as /class/input/input2 [ 7.549910] ACPI: Lid Switch [LID] [ 7.550038] input: Sleep Button (CM) as /class/input/input3 [ 7.570239] ACPI: Sleep Button (CM) [SLPB] [ 7.570347] input: Power Button (CM) as /class/input/input4 [ 7.581993] ath_pci: trunk [ 7.582049] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 7.582065] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 8.071393] MadWifi: ath_attach: Switching rfkill capability off [ 8.102273] ACPI: Power Button (CM) [PWRB] [ 8.288053] ath_rate_sample: 1.2 (trunk) [ 9.019314] ACPI: AC Adapter [AC0] (on-line) [ 9.329400] usb-storage: device scan complete [ 9.329943] scsi 3:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0 [ 9.331621] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 10.248813] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 10.248921] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860) [ 10.248962] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.347054] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 10.347086] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 10.372200] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 10.406934] input: PC Speaker as /class/input/input5 [ 10.490918] intel_rng: FWH not detected [ 10.517704] ACPI: EC: missing OBF confirmation, don't expect it any longer. [ 10.587325] ACPI: Battery Slot [BAT0] (battery present) [ 10.587771] input: Video Bus as /class/input/input6 [ 10.614421] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.745610] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 10.745648] rtc0: alarms up to one month [ 10.758210] MadWifi: ath_attach: Switching per-packet transmit power control off [ 10.758843] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 10.758853] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 10.758870] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 10.758885] wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic [ 10.758890] wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic [ 10.758895] wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic [ 10.758900] wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic [ 10.758905] wifi0: ath_announce: Use hw queue 8 for CAB traffic [ 10.758909] wifi0: ath_announce: Use hw queue 9 for beacons [ 10.866470] ath_pci: wifi0: Atheros 5424/2424: mem=0xfbef0000, irq=18 [ 10.867590] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 12.542187] EXT3 FS on sda1, internal journal [ 12.794237] input: ImPS/2 Logitech Wheel Mouse as /class/input/input7 [ 13.088466] Asus EeePC Hotkey Driver [ 13.088612] [eeepc hotk] Hotkey init flags 0x41. [ 13.089836] [eeepc hotk] Get control methods supported: 0x101711 [ 13.118128] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 13.127525] fuse init (API version 7.9) [ 27.888455] kjournald starting. Commit interval 300 seconds [ 27.890148] EXT3 FS on sdb1, internal journal [ 27.890156] EXT3-fs: mounted filesystem with ordered data mode. [ 34.651506] Bluetooth: Core ver 2.11 [ 34.655049] NET: Registered protocol family 31 [ 34.655064] Bluetooth: HCI device and connection manager initialized [ 34.655075] Bluetooth: HCI socket layer initialized [ 34.742919] Bluetooth: L2CAP ver 2.9 [ 34.742934] Bluetooth: L2CAP socket layer initialized [ 34.769357] Bluetooth: RFCOMM socket layer initialized [ 34.769393] Bluetooth: RFCOMM TTY layer initialized [ 34.769400] Bluetooth: RFCOMM ver 1.8 [ 38.362948] [drm] Initialized drm 1.1.0 20060810 [ 38.369594] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.369609] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 38.369778] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 105.020318] NET: Registered protocol family 10 [ 105.022867] lo: Disabled Privacy Extensions [ 105.025417] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 115.711263] ath0: no IPv6 routers present [ 160.750293] ath0: no IPv6 routers present ** Loaded modules: Module Size Used by wlan_ccmp 7872 2 ipv6 241956 8 i915 27744 2 drm 72280 3 i915 rfcomm 36368 0 l2cap 22784 5 rfcomm bluetooth 52900 4 rfcomm,l2cap cpufreq_conservative 7432 0 cpufreq_userspace 3812 0 cpufreq_stats 5216 0 cpufreq_ondemand 8428 0 cpufreq_powersave 1856 0 fuse 44348 3 p4_clockmod 5380 0 speedstep_lib 5316 1 p4_clockmod freq_table 4512 3 cpufreq_stats,cpufreq_ondemand,p4_clockmod eeepc_acpi 6928 0 wlan_scan_sta 12480 1 psmouse 35920 0 rtc_cmos 10304 0 rtc_core 17532 1 rtc_cmos rtc_lib 2976 1 rtc_core serio_raw 6532 0 rng_core 4900 0 pcspkr 3136 0 i2c_i801 9520 0 snd_hda_intel 309976 1 i2c_core 22548 1 i2c_i801 iTCO_wdt 11204 0 snd_pcm_oss 37824 0 snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss snd_mixer_oss 14880 1 snd_pcm_oss video 19728 0 output 3712 1 video battery 8448 0 ac 4448 0 snd_seq_dummy 3780 0 ath_rate_sample 12448 1 ath_pci 165868 0 button 8240 0 wlan 216880 5 wlan_ccmp,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 279232 3 ath_rate_sample,ath_pci atl2 27608 0 snd_seq_oss 28544 0 snd_seq_midi_event 6976 1 snd_seq_oss snd_seq 45872 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_timer 21320 2 snd_pcm,snd_seq snd_seq_device 7564 3 snd_seq_dummy,snd_seq_oss,snd_seq intel_agp 25084 1 agpgart 31720 3 drm,intel_agp snd 48772 10 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device soundcore 7488 1 snd snd_page_alloc 9992 2 snd_hda_intel,snd_pcm evdev 11328 6 ext3 120360 2 jbd 43444 1 ext3 mbcache 8260 1 ext3 sd_mod 26072 4 ide_pci_generic 4228 0 [permanent] ide_core 100312 1 ide_pci_generic ata_generic 8004 0 ahci 27336 0 usb_storage 76896 0 ata_piix 20196 2 libata 142288 3 ata_generic,ahci,ata_piix scsi_mod 138668 3 sd_mod,usb_storage,libata dock 10448 1 libata ehci_hcd 32620 0 uhci_hcd 22352 0 usbcore 130032 4 usb_storage,ehci_hcd,uhci_hcd thermal 19100 0 processor 39660 2 thermal fan 5636 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:8337] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fbf00000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ahci, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01) Subsystem: Device [1a3b:1026] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath_pci Kernel modules: ath_pci, ath5k 03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0) Subsystem: ASUSTeK Computer Inc. Device [1043:8233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 220 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fbfa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl2 Kernel modules: atl2 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-686 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.25-2-686 recommends: ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.25-2-686 suggests: ii grub 0.97-46 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.25 <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686: linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686: linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686: linux-image-2.6.25-2-686/postinst/kimage-is-a-directory: linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
--- End Message ---
--- Begin Message ---On Sat, Aug 23, 2008 at 09:31:13PM +0300, Denis Misiurca wrote: > 2008/8/23 maximilian attems <[EMAIL PROTECTED]>: > > old kernel checkout 2.6.26 in unstable installs just fine in testing. > Thank you. I don't see this message anymore. I'll see if hangs will occur. No update, assuming fixed. Bastian -- You! What PLANET is this! -- McCoy, "The City on the Edge of Forever", stardate 3134.0
--- End Message ---
