Package: linux-image-2.6.26-1-686
Version: 2.6.26-4
Followup-For: Bug #498205
I have got the same problem but on a Dell Latitude D620, meaning a
32-bit kernel and the internal PS/2 keyboard. The problem for me seems
to trigger only sometimes when switching from X back to console. But
once it happens, the arrow keys cease to work and no matter how often I
do the X->console switch, it doesn't get fixed.
The output of 'showkey -k' and 'showkey -s' is the same when the keys
work and when they don't. However, 'showkey -m' doesn't show anything
when things are broken, indicating a problem with the keymap, but
trying to reload the keymap with 'loadkeys' has no effect.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-4) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC
2008
** Command line:
root=/dev/sda2 ro vga=0x317
** Not tainted
** Kernel log:
[ 7436.647970] PM: Writing back config space on device 0000:00:1e.0 at offset 8
(was f0, writing 50005000)
[ 7436.647982] PM: Writing back config space on device 0000:00:1e.0 at offset 7
(was 2280e0f0, writing 22802020)
[ 7436.647990] PM: Writing back config space on device 0000:00:1e.0 at offset 6
(was 20030300, writing 20070300)
[ 7436.648006] PM: Writing back config space on device 0000:00:1e.0 at offset 1
(was 100007, writing 100107)
[ 7436.648033] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 7436.648081] PM: Writing back config space on device 0000:00:1f.0 at offset 1
(was 2100007, writing 2100107)
[ 7436.663830] PM: Writing back config space on device 0000:00:1f.2 at offset f
(was 200, writing 20b)
[ 7436.663884] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) ->
IRQ 17
[ 7436.663893] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 7436.663924] PM: Writing back config space on device 0000:00:1f.3 at offset f
(was 200, writing 20b)
[ 7436.663884] ata1.00: _GTF evaluation failed (AE 0x1001)
[ 7436.663965] PM: Writing back config space on device 0000:00:1f.3 at offset 1
(was 2800001, writing 2800101)
[ 7436.664073] PM: Writing back config space on device 0000:0c:00.0 at offset f
(was 100, writing 10b)
[ 7436.664181] PM: Writing back config space on device 0000:0c:00.0 at offset 4
(was 0, writing dfdff000)
[ 7436.664200] PM: Writing back config space on device 0000:0c:00.0 at offset 3
(was 0, writing 10)
[ 7436.664224] PM: Writing back config space on device 0000:0c:00.0 at offset 1
(was 100000, writing 100102)
[ 7436.664334] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 7436.664377] PM: Writing back config space on device 0000:09:00.0 at offset f
(was 1c4, writing 105)
[ 7436.664408] PM: Writing back config space on device 0000:09:00.0 at offset 5
(was 1e81b006, writing 0)
[ 7436.664418] PM: Writing back config space on device 0000:09:00.0 at offset 4
(was 90140004, writing dfcf0004)
[ 7436.664428] PM: Writing back config space on device 0000:09:00.0 at offset 3
(was 0, writing 10)
[ 7436.664440] PM: Writing back config space on device 0000:09:00.0 at offset 1
(was 100000, writing 100106)
[ 7436.664494] PM: Writing back config space on device 0000:03:01.0 at offset f
(was 800100, writing 58001ff)
[ 7436.664503] PM: Writing back config space on device 0000:03:01.0 at offset e
(was 1, writing 24fd)
[ 7436.664512] PM: Writing back config space on device 0000:03:01.0 at offset d
(was 1, writing 2401)
[ 7436.664520] PM: Writing back config space on device 0000:03:01.0 at offset c
(was 1, writing 20fd)
[ 7436.664529] PM: Writing back config space on device 0000:03:01.0 at offset b
(was 1, writing 2001)
[ 7436.664538] PM: Writing back config space on device 0000:03:01.0 at offset a
(was 0, writing 50bff000)
[ 7436.664548] PM: Writing back config space on device 0000:03:01.0 at offset 9
(was 0, writing 50800000)
[ 7436.664557] PM: Writing back config space on device 0000:03:01.0 at offset 8
(was 0, writing 507ff000)
[ 7436.664566] PM: Writing back config space on device 0000:03:01.0 at offset 7
(was 0, writing 50400000)
[ 7436.664575] PM: Writing back config space on device 0000:03:01.0 at offset 6
(was 20000000, writing b0070403)
[ 7436.664586] PM: Writing back config space on device 0000:03:01.0 at offset 4
(was 0, writing 50000000)
[ 7436.664595] PM: Writing back config space on device 0000:03:01.0 at offset 3
(was 24000, writing 2a800)
[ 7436.664606] PM: Writing back config space on device 0000:03:01.0 at offset 1
(was 4100007, writing 4100087)
[ 7436.664637] Yenta O2: res at 0x94/0xD4: 00/ea
[ 7436.664640] Yenta O2: enabling read prefetch/write burst
[ 7436.834616] serial 00:0b: activated
[ 7436.902768] ata2.00: configured for UDMA/33
[ 7438.541655] sd 0:0:0:0: [sda] Starting disk
[ 7438.603333] ata1.00: configured for UDMA/100
[ 7438.617666] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7438.617666] sd 0:0:0:0: [sda] Write Protect is off
[ 7438.617666] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7438.617666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 7438.630660] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 7438.630672] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 7438.672908] Restarting tasks ... <6>usb 1-2: USB disconnect, address 3
[ 7438.690397] usb 1-2.3: USB disconnect, address 4
[ 7438.693365] usb 1-2.3.1: USB disconnect, address 6
[ 7438.696901] usb 1-2.3.2: USB disconnect, address 7
[ 7438.700141] usb 1-2.4: USB disconnect, address 5
[ 7438.703978] done.
[ 7438.940360] usb 1-2: new full speed USB device using uhci_hcd and address 8
[ 7439.102954] usb 1-2: configuration #1 chosen from 1 choice
[ 7439.112322] hub 1-2:1.0: USB hub found
[ 7439.112322] hub 1-2:1.0: 4 ports detected
[ 7439.181601] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection
driver for Linux, 1.2.26ks
[ 7439.181601] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 7439.181601] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 7439.181601] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 7439.181601] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 7439.270048] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 7439.270048] usb 1-2: New USB device found, idVendor=413c, idProduct=a005
[ 7439.270048] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7439.270048] usb 2-2: USB disconnect, address 2
[ 7439.294075] phy1: Selected rate control algorithm 'iwl-3945-rs'
[ 7439.748567] usb 1-2.3: new full speed USB device using uhci_hcd and address 9
[ 7439.877573] usb 1-2.3: configuration #1 chosen from 1 choice
[ 7439.878811] hub 1-2.3:1.0: USB hub found
[ 7439.879286] input: PS/2 Mouse as /class/input/input10
[ 7439.893611] hub 1-2.3:1.0: 3 ports detected
[ 7439.937758] input: AlpsPS/2 ALPS GlidePoint as /class/input/input11
[ 7440.019082] usb 1-2.3: New USB device found, idVendor=0b97, idProduct=7761
[ 7440.019090] usb 1-2.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7440.243824] usb 1-2.4: new full speed USB device using uhci_hcd and address
10
[ 7440.395982] usb 1-2.4: configuration #1 chosen from 1 choice
[ 7440.402502] usb 1-2.4: New USB device found, idVendor=413c, idProduct=8103
[ 7440.402514] usb 1-2.4: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7440.611456] usb 1-2.3.1: new full speed USB device using uhci_hcd and
address 11
[ 7440.744858] usb 1-2.3.1: configuration #1 chosen from 1 choice
[ 7440.747379] usb 1-2.3.1: New USB device found, idVendor=0483, idProduct=2016
[ 7440.747379] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7440.747379] usb 1-2.3.1: Product: Biometric Coprocessor
[ 7440.747379] usb 1-2.3.1: Manufacturer: STMicroelectronics
[ 7440.975951] usb 1-2.3.2: new full speed USB device using uhci_hcd and
address 12
[ 7441.094128] usb 1-2.3.2: configuration #1 chosen from 1 choice
[ 7441.096456] usb 1-2.3.2: New USB device found, idVendor=0b97, idProduct=7762
[ 7441.096468] usb 1-2.3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 7441.096474] usb 1-2.3.2: Product: O2Micro CCID SC Reader
[ 7441.096478] usb 1-2.3.2: Manufacturer: O2
[ 7444.253899] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 7444.428044] usb 2-2: configuration #1 chosen from 1 choice
[ 7444.433002] cdc_acm 2-2:1.1: ttyACM0: USB ACM device
[ 7444.440150] cdc_acm 2-2:1.3: ttyACM1: USB ACM device
[ 7444.452151] usb 2-2: New USB device found, idVendor=0fce, idProduct=d072
[ 7444.452163] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7444.452169] usb 2-2: Product: Sony Ericsson K320
[ 7444.452173] usb 2-2: Manufacturer: Sony Ericsson
[ 7444.452177] usb 2-2: SerialNumber: 353322014585765_0
** Loaded modules:
Module Size Used by
iwl3945 78772 0
mac80211 139680 1 iwl3945
usb_storage 75936 0
tun 8292 1
ppp_deflate 4224 0
zlib_deflate 17624 1 ppp_deflate
zlib_inflate 14144 1 ppp_deflate
bsd_comp 4864 0
ppp_async 7488 1
crc_ccitt 2080 1 ppp_async
ppp_generic 20028 7 ppp_deflate,bsd_comp,ppp_async
slhc 5408 1 ppp_generic
i915 25280 2
drm 65256 3 i915
ipv6 235204 18
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
cpufreq_ondemand 6476 2
acpi_cpufreq 6796 0
freq_table 4224 3 cpufreq_stats,cpufreq_ondemand,acpi_cpufreq
loop 12748 0
arc4 1824 2
ecb 2624 2
crypto_blkcipher 15236 1 ecb
pcmcia 29548 0
firmware_class 6816 2 iwl3945,pcmcia
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
joydev 8480 0
rng_core 3940 0
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
video 16400 0
output 2912 1 video
led_class 3908 1 iwl3945
button 6064 0
battery 10180 0
ac 4196 0
intel_agp 22300 1
snd_hda_intel 324248 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
agpgart 28776 3 drm,intel_agp
cfg80211 21576 2 iwl3945,mac80211
dcdbas 6272 0
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
hci_usb 12252 0
iTCO_wdt 9508 0
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
cdc_acm 12224 3
snd_timer 17800 1 snd_pcm
bluetooth 44900 1 hci_usb
evdev 8000 7
snd 45604 5
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
psmouse 32336 0
soundcore 6368 1 snd
serio_raw 4740 0
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
ext3 105256 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
raid10 18560 0
raid456 117264 0
async_xor 3520 1 raid456
async_memcpy 2304 1 raid456
async_tx 6284 3 raid456,async_xor,async_memcpy
xor 14696 2 raid456,async_xor
raid1 18016 0
raid0 6368 0
multipath 6112 0
linear 4544 0
md_mod 67036 6 raid10,raid456,raid1,raid0,multipath,linear
sg 26964 0
sr_mod 13316 0
cdrom 30176 1 sr_mod
sd_mod 22200 4
ide_pci_generic 3908 0 [permanent]
ide_core 92628 1 ide_pci_generic
ata_piix 14180 3
ata_generic 4676 0
ehci_hcd 28428 0
uhci_hcd 18672 0
libata 140416 2 ata_piix,ata_generic
tg3 84516 0
scsi_mod 129356 5 usb_storage,sg,sr_mod,sd_mod,libata
usbcore 118160 6 usb_storage,hci_usb,cdc_acm,ehci_hcd,uhci_hcd
dock 8272 1 libata
thermal 15228 0
processor 32576 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at eff8 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: dfd00000-dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 [8086:27d4] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 50000000-500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0
CardBus/SmartCardBus Controller [1217:6972] (rev 40)
Subsystem: Dell Device [1028:01c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 50400000-507ff000 (prefetchable)
Memory window 1: 50800000-50bff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752
Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
Subsystem: Dell Device [1028:01c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfcf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92i tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
