Package: linux-image-2.6.26-1-686 Version: 2.6.26-5 Severity: normal -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
During bootup evdev or the initramfs loads the usbcore.ko module to initialize usb devices, this should go fine without strange errors like enumeration problems or connecting problems. I almost always get errors like "unable to enumerate usbdevice on port x" This especialy happens with external usbdevices connected to the main hup or an external hup. I think these device just need some more time to enumerate and the usbcore is to quick with is justments? The device do all work, so its not that the devices are not working but its about the output that is showed to the users. I would like to keep the bootlogs as logical and correct as possible. Thanks in advance. - -- Package-specific info: ** Version: Linux version 2.6.26-1-686 (Debian 2.6.26-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC 2008 ** Command line: root=/dev/sda1 ro quiet noresume pci=nommconf SELINUX_INIT=NO ** Tainted: P (1) ** Kernel log: [ 13.197510] ehci_hcd 0000:00:1d.7: debug port 1 [ 13.197524] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 13.197544] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00 [ 13.244063] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.244279] usb usb5: configuration #1 chosen from 1 choice [ 13.244358] hub 5-0:1.0: USB hub found [ 13.244379] hub 5-0:1.0: 8 ports detected [ 13.348349] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.348361] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.348369] usb usb5: Product: EHCI Host Controller [ 13.348375] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 13.348381] usb usb5: SerialNumber: 0000:00:1d.7 [ 13.349360] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 13.640068] usb 1-2: device not accepting address 2, error -71 [ 13.696117] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 14.064092] usb 5-2: new high speed USB device using ehci_hcd and address 2 [ 14.201633] usb 5-2: configuration #1 chosen from 1 choice [ 14.202194] usb 5-2: New USB device found, idVendor=2040, idProduct=6502 [ 14.202204] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 14.202212] usb 5-2: Product: WinTV HVR-900 [ 14.202217] usb 5-2: SerialNumber: 4030600678 [ 14.440108] usb 5-3: new high speed USB device using ehci_hcd and address 3 [ 14.573637] usb 5-3: configuration #1 chosen from 1 choice [ 14.573951] hub 5-3:1.0: USB hub found [ 14.574235] hub 5-3:1.0: 4 ports detected [ 14.680339] usb 5-3: New USB device found, idVendor=05e3, idProduct=0608 [ 14.680353] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 14.680361] usb 5-3: Product: USB2.0 Hub [ 14.880378] usb 5-3.1: new low speed USB device using ehci_hcd and address 4 [ 14.996769] usb 5-3.1: configuration #1 chosen from 1 choice [ 14.998281] usb 5-3.1: New USB device found, idVendor=046d, idProduct=c30e [ 14.998290] usb 5-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.998301] usb 5-3.1: Product: HID compliant keyboard [ 14.998307] usb 5-3.1: Manufacturer: Logitech [ 15.196376] usb 5-3.2: new full speed USB device using ehci_hcd and address 5 [ 15.298286] usb 5-3.2: configuration #1 chosen from 1 choice [ 15.301387] usb 5-3.2: New USB device found, idVendor=04e6, idProduct=5115 [ 15.301399] usb 5-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 15.301407] usb 5-3.2: Product: SCR33x USB Smart Card Reader [ 15.301414] usb 5-3.2: Manufacturer: SCM Microsystems Inc. [ 15.301420] usb 5-3.2: SerialNumber: 21120618201041 [ 15.500372] usb 5-3.3: new low speed USB device using ehci_hcd and address 6 [ 15.598515] usb 5-3.3: configuration #1 chosen from 1 choice [ 15.599173] usb 5-3.3: New USB device found, idVendor=046d, idProduct=c043 [ 15.599182] usb 5-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 15.599190] usb 5-3.3: Product: USB-PS/2 Optical Mouse [ 15.599197] usb 5-3.3: Manufacturer: Logitech [ 16.251479] Linux video capture interface: v2.00 [ 16.323356] em28xx v4l2 driver version 0.0.1 loaded [ 16.323489] em28xx: new video device (2040:6502): interface 0, class 255 [ 16.323496] em28xx: device is attached to a USB 2.0 bus [ 16.323505] em28xx #0: Alternate settings: 8 [ 16.323511] em28xx #0: Alternate setting 0, max size= 0 [ 16.323517] em28xx #0: Alternate setting 1, max size= 0 [ 16.323523] em28xx #0: Alternate setting 2, max size= 1448 [ 16.323530] em28xx #0: Alternate setting 3, max size= 2048 [ 16.323536] em28xx #0: Alternate setting 4, max size= 2304 [ 16.323545] em28xx #0: Alternate setting 5, max size= 2580 [ 16.323551] em28xx #0: Alternate setting 6, max size= 2892 [ 16.323557] em28xx #0: Alternate setting 7, max size= 3072 [ 16.985534] attach_inform: tvp5150 detected. [ 17.048604] tvp5150 1-005c: tvp5150am1 detected. [ 18.658852] successfully attached tuner [ 18.662881] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 18.681221] em28xx #0: V4L2 device registered as /dev/video0 [ 18.681399] input: em2880/em2870 remote control as /class/input/input8 [ 18.716120] em28xx-input.c: remote control handler attached [ 18.716132] em28xx #0: Found Hauppauge WinTV HVR (B2C0) [ 18.716257] usbcore: registered new interface driver em28xx [ 18.716326] usbcore: registered new interface driver hiddev [ 18.726957] input: Logitech HID compliant keyboard as /class/input/input9 [ 18.752186] input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.7-3.1 [ 18.771262] input: Logitech HID compliant keyboard as /class/input/input10 [ 18.800190] input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.7-3.1 [ 18.804670] input: Logitech USB-PS/2 Optical Mouse as /class/input/input11 [ 18.832232] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.3 [ 18.832288] usbcore: registered new interface driver usbhid [ 18.832307] usbhid: v2.6:USB HID core driver [ 18.917507] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 18.917519] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 18.917672] Em28xx: Initialized (Em28xx Audio Extension) extension [ 19.231029] em2880-dvb.c: DVB Init [ 20.482229] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 20.633712] fuse init (API version 7.9) [ 21.460246] DVB: registering new adapter (em2880 DVB-T) [ 21.460261] DVB: registering frontend 0 (Micronas DRX3973D DVB-T)... [ 21.460956] Em28xx: Initialized (Em2880 DVB Extension) extension [ 21.528239] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 22.836419] Bluetooth: Core ver 2.11 [ 22.838893] NET: Registered protocol family 31 [ 22.838902] Bluetooth: HCI device and connection manager initialized [ 22.838911] Bluetooth: HCI socket layer initialized [ 22.926240] Bluetooth: L2CAP ver 2.9 [ 22.926249] Bluetooth: L2CAP socket layer initialized [ 22.949112] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 23.028348] Bluetooth: RFCOMM socket layer initialized [ 23.028377] Bluetooth: RFCOMM TTY layer initialized [ 23.028382] Bluetooth: RFCOMM ver 1.8 [ 73.426602] em28xx_dvb_init [ 203.401124] em28xx_dvb_init ** Loaded modules: Module Size Used by rfcomm 28272 2 hidp 12000 2 l2cap 17248 14 rfcomm,hidp bluetooth 44900 5 rfcomm,hidp,l2cap fuse 42908 3 p4_clockmod 4036 0 speedstep_lib 4516 1 p4_clockmod freq_table 4224 1 p4_clockmod drx3973d 59504 1 em28xx_dvb 13636 4 dvb_core 66528 1 em28xx_dvb em28xx_audio 7044 0 tuner_xc3028 4864 1 tvp5150 15856 0 usbhid 35904 0 hid 33184 2 hidp,usbhid ff_memless 4392 1 usbhid em28xx 358592 2 em28xx_dvb,em28xx_audio videodev 27520 1 em28xx v4l1_compat 12260 2 em28xx,videodev joydev 8480 0 wlan_scan_sta 11264 0 snd_pcsp 8576 0 video 16400 0 output 2912 1 video battery 10180 0 ac 4196 0 psmouse 32336 0 eeepc_laptop 7440 0 button 6064 0 i2c_i801 7920 0 serio_raw 4740 0 i2c_core 19828 5 drx3973d,tuner_xc3028,tvp5150,em28xx,i2c_i801 ehci_hcd 28428 0 uhci_hcd 18672 0 iTCO_wdt 9508 0 ath_rate_sample 11072 1 usbcore 118160 8 em28xx_dvb,em28xx_audio,usbhid,em28xx,ehci_hcd,uhci_hcd ath_pci 202552 0 wlan 193776 4 wlan_scan_sta,ath_rate_sample,ath_pci snd_hda_intel 324248 3 ath_hal 300736 3 ath_rate_sample,ath_pci snd_pcm 62628 4 em28xx_audio,snd_pcsp,snd_hda_intel snd_timer 17800 2 snd_pcm intel_agp 22300 1 snd 45604 9 em28xx_audio,snd_pcsp,snd_hda_intel,snd_pcm,snd_timer atl2 22744 0 agpgart 28776 2 intel_agp soundcore 6368 1 snd snd_page_alloc 7816 2 snd_hda_intel,snd_pcm evdev 8000 10 ext2 54344 1 mbcache 7108 1 ext2 sd_mod 22200 2 thermal 15228 0 processor 32576 2 thermal fan 4164 0 thermal_sys 10856 4 video,thermal,processor,fan ata_generic 4676 0 ahci 23176 0 ata_piix 14180 1 libata 140416 3 ata_generic,ahci,ata_piix scsi_mod 129356 2 sd_mod,libata dock 8272 1 libata ide_pci_generic 3908 0 [permanent] ide_core 92628 1 ide_pci_generic ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fbf00000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at e880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ahci, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:82d8] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01) Subsystem: Device [1a3b:1026] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath_pci Kernel modules: ath5k, ath_pci 03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter [1969:2048] (rev a0) Subsystem: ASUSTeK Computer Inc. Device [1043:8233] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 220 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fbfa0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl2 Kernel modules: atl2 - -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.26-1-686 depends on: ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-1-686 recommends: ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-1-686 suggests: ii grub 0.97-47 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) - -- debconf information excluded -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iJwEAQECAAYFAkjeabYACgkQ1WclBW9j5Hn4qAP/RsXaVecKBYr7qV3v8HPnkMOz LOstIU5/JqS21YS3O85zMfRyD93SsN2xVlSmYAfJhEEJ3PybK7ApLgfN9h50nZab a8y784faCY7uXN5I8F8zHGr7B9kBkKR28X11zomBeeySNPus9n7HU7sQZKdtCFZw XjMqk5eXfFyvAcDwEjQ= =Dmgp -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]