--- Begin Message ---
Package: linux-image-2.6.26-1-686-bigmem
Version: 2.6.26-1
Severity: important
I have an Asus P5Q motherboard. It has a Marvell 88SE6121 Controller
inside that takes care of the IDE connection. Under the EtchnHalf
2.6.24 kernel, this works just fine and I can access the DVD ROM drive I
have connected to it. Under 2.6.25+ kernels, this is simply not there.
According to what I could find on the net, this is a regression of the
2.6.25 and 2.6.26 kernels.
Under dmesg, I have the following errors pertaining to this.
[ 6.161732] ata5: SATA max UDMA/133 abar m1...@0xfeaffc00 port
0xfeaffd00 irq 16
[ 6.161732] ata6: SATA max UDMA/133 abar m1...@0xfeaffc00 port
0xfeaffd80 irq 16
[ 6.480206] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.804134] ata6: SATA link down (SStatus 0 SControl 300)
I've also noticed that under 2.6.24, it does not load the MV_AHCI HACK.
While under 2.6.25+ it does. I currently have AHCI switched to IDE in the
motherboard.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-1) (wa...@debian.org) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Jul 30
20:48:53 UTC 2008
** Command line:
root=/dev/sdc1 ro quiet
** Tainted: P (1)
** Kernel log:
[ 13.917579] input: Power Button (FF) as /class/input/input3
[ 13.917579] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.917579] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.917579] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.917579] end_request: I/O error, dev sr1, sector 131048
[ 13.917579] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.917579] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.917579] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.917579] end_request: I/O error, dev sr1, sector 131052
[ 13.917581] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.917581] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.917581] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.917581] end_request: I/O error, dev sr1, sector 131048
[ 13.921578] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.921578] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.921578] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.921578] end_request: I/O error, dev sr1, sector 131052
[ 13.921578] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.921578] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.921578] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.921578] end_request: I/O error, dev sr1, sector 131064
[ 13.926196] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.926196] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.926196] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.926196] end_request: I/O error, dev sr1, sector 131064
[ 13.926196] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.926196] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.926196] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.926196] end_request: I/O error, dev sr1, sector 131064
[ 13.926199] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.926202] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.926204] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.926207] end_request: I/O error, dev sr1, sector 131064
[ 13.931337] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.931337] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.931337] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.931337] end_request: I/O error, dev sr1, sector 131064
[ 13.931337] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.931337] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.931337] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.931337] end_request: I/O error, dev sr1, sector 131064
[ 13.934936] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.934936] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.934936] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.934936] end_request: I/O error, dev sr1, sector 131064
[ 13.935139] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.935139] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.935139] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.935139] end_request: I/O error, dev sr1, sector 131000
[ 13.934936] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid
0x03F0 pid 0x3F11
[ 13.934936] usbcore: registered new interface driver usblp
[ 13.938722] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.938722] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.938722] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.938722] end_request: I/O error, dev sr1, sector 131004
[ 13.938722] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.938722] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.938722] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.938722] end_request: I/O error, dev sr1, sector 131056
[ 13.938971] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.938974] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.938977] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.938980] end_request: I/O error, dev sr1, sector 131060
[ 13.942725] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.942728] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.942731] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.942734] end_request: I/O error, dev sr1, sector 131064
[ 13.944228] sr 4:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 13.944231] sr 4:0:0:1: [sr1] Sense Key : No Sense [current]
[ 13.944233] sr 4:0:0:1: [sr1] Add. Sense: No additional sense information
[ 13.944236] end_request: I/O error, dev sr1, sector 131064
[ 13.957071] ACPI: Power Button (FF) [PWRF]
[ 13.957071] input: Power Button (CM) as /class/input/input4
[ 13.961063] ACPI: Power Button (CM) [PWRB]
[ 13.993842] gameport: EMU10K1 is pci0000:05:00.1/gameport0, io 0xec00, speed
1046kHz
[ 14.113483] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.268172] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 14.271631] Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
[ 15.470025] Adding 1020116k swap on /dev/sdc3. Priority:-1 extents:1
across:1020116k
[ 16.068488] EXT3 FS on sdc1, internal journal
[ 16.355339] loop: module loaded
[ 16.424112] device-mapper: uevent: version 1.0.3
[ 16.424112] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 16.867482] kjournald starting. Commit interval 5 seconds
[ 16.867482] EXT3 FS on sdc2, internal journal
[ 16.867482] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.958545] fuse init (API version 7.9)
[ 23.280953] NET: Registered protocol family 10
[ 23.280953] lo: Disabled Privacy Extensions
[ 25.803248] lp: driver loaded but no devices found
[ 26.037885] ppdev: user-space parallel port driver
[ 31.168709] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<1000 Mbps Full
Duplex>
[ 31.170959] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.171465] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.064868] nvidia: module license 'NVIDIA' taints kernel.
[ 36.340722] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 36.340722] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 36.340722] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun
4 23:43:17 PDT 2008
[ 37.203010] usb 4-6: USB disconnect, address 2
[ 58.850048] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
nvidia 7087428 34
ppdev 7236 0
parport_pc 23396 0
lp 8932 0
parport 31756 3 ppdev,parport_pc,lp
ipv6 235748 20
video 17168 0
output 3680 1 video
ac 4032 0
battery 7040 0
acpi_cpufreq 7564 4
cpufreq_conservative 6728 0
cpufreq_stats 4640 0
cpufreq_powersave 2624 0
cpufreq_userspace 4420 0
cpufreq_ondemand 7244 1
freq_table 5088 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
fuse 43676 4
dm_snapshot 15108 0
dm_mirror 15872 0
dm_log 9220 1 dm_mirror
dm_mod 46952 3 dm_snapshot,dm_mirror,dm_log
loop 13516 0
snd_emu10k1_synth 6432 0
snd_emux_synth 28704 1 snd_emu10k1_synth
snd_seq_virmidi 5664 1 snd_emux_synth
snd_seq_midi_emul 6144 1 snd_emux_synth
snd_emu10k1 115808 2 snd_emu10k1_synth
snd_seq_dummy 3428 0
snd_seq_oss 25728 0
snd_seq_midi 6496 0
snd_seq_midi_event 7200 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 42224 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_rawmidi 19328 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
firmware_class 7584 1 snd_emu10k1
snd_ac97_codec 89252 1 snd_emu10k1
ac97_bus 2496 1 snd_ac97_codec
snd_pcm_oss 33568 0
snd_mixer_oss 13088 1 snd_pcm_oss
snd_pcm 63460 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq_device 7148 8
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd_timer 18568 3 snd_emu10k1,snd_seq,snd_pcm
snd_util_mem 4800 2 snd_emux_synth,snd_emu10k1
emu10k1_gp 3552 0
snd_hwdep 6980 2 snd_emux_synth,snd_emu10k1
snd_page_alloc 8648 2 snd_emu10k1,snd_pcm
usblp 11360 0
button 6832 0
intel_agp 23236 0
snd 46372 15
snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_seq,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
soundcore 7136 1 snd
i2c_i801 8688 0
rtc_cmos 9696 0
rtc_core 14492 1 rtc_cmos
pcspkr 3200 0
gameport 11468 2 emu10k1_gp
rtc_lib 3584 1 rtc_core
i2c_core 20596 2 nvidia,i2c_i801
agpgart 29576 2 nvidia,intel_agp
atl1e 28724 0
evdev 8768 3
ext3 105992 2
jbd 40148 1 ext3
mbcache 7876 1 ext3
sg 27732 0
sd_mod 22968 8
sr_mod 14084 0
cdrom 30944 1 sr_mod
ide_pci_generic 4676 0 [permanent]
ide_core 93460 1 ide_pci_generic
ata_generic 5444 0
pata_marvell 4288 0
usbhid 36736 0
hid 33952 1 usbhid
ff_memless 5160 1 usbhid
usb_storage 76576 0
floppy 48516 0
ata_piix 15012 5
ohci1394 26000 0
ahci 24008 0
ieee1394 76600 1 ohci1394
libata 141280 4 ata_generic,pata_marvell,ata_piix,ahci
scsi_mod 130124 5 sg,sd_mod,sr_mod,usb_storage,libata
dock 9040 1 libata
ehci_hcd 29420 0
uhci_hcd 19504 0
usbcore 119184 6 usblp,usbhid,usb_storage,ehci_hcd,uhci_hcd
thermal 15996 0
processor 33508 2 acpi_cpufreq,thermal
fan 4932 0
thermal_sys 11624 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Eaglelake DRAM Controller
[8086:2e20] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Eaglelake PCI Express Root Port
[8086:2e21] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fa000000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4
[8086:3a37]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5
[8086:3a38]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6
[8086:3a39]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2
[8086:3a3c] (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 1
[8086:3a40]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 5
[8086:3a48]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 6
[8086:3a4a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1
[8086:3a34]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2
[8086:3a35]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3
[8086:3a36]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1
[8086:3a3a] (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC Interface Controller
[8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation ICH10 4 port SATA IDE
Controller [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation ICH10 2 port SATA IDE
Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0612]
(rev a2)
Subsystem: eVga.com. Corp. Device [3842:c875]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
[virtual] Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device
[1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at cc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
Kernel modules: atl1e
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II
Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci, pata_marvell
05:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004]
(rev 04)
Subsystem: Creative Labs Device [1102:1002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at e880 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
05:00.1 Input device controller [0980]: Creative Labs SB Audigy Game Port
[1102:7003] (rev 04)
Subsystem: Creative Labs Device [1102:0060]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
05:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port
[1102:4001] (rev 04) (prog-if 10)
Subsystem: Creative Labs Device [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at febf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70)
(prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.23 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686-bigmem recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686-bigmem suggests:
ii grub 0.97-44 GRand Unified Bootloader (Legacy v
ii linux-doc-2.6.26 2.6.26-1 Linux kernel specific documentatio
-- debconf information:
linux-image-2.6.26-1-686-bigmem/preinst/elilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/create-kimage-link-2.6.26-1-686-bigmem:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686-bigmem/preinst/overwriting-modules-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-initrd-2.6.26-1-686-bigmem:
false
linux-image-2.6.26-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/old-initrd-link-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/initrd-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-2.6.26-1-686-bigmem:
false
linux-image-2.6.26-1-686-bigmem/postinst/old-dir-initrd-link-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-test-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/old-system-map-link-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/prerm/removing-running-kernel-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686-bigmem/preinst/failed-to-move-modules-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-overwrite-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-install-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/lilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/bootloader-initrd-2.6.26-1-686-bigmem:
true
--- End Message ---