Package: linux-image-2.6.24-1-686 Version: 2.6.24-7 Severity: important After installing lenny with netinstall beta2 to a megaraid (dell pe6600) disk array using debians default LVM partition type the system is unusable after bootup.
I think the error is in the load order of the modules: LVM volumes are checked before the scsi driver for megaraid is loaded. -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-7) ([email protected]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu May 8 02:16:39 UTC 2008 ** Command line: root=/dev/sda1 ro quiet ** Not tainted ** Kernel log: 0000:00:05.1: ttyS1 at I/O 0xe880 (irq = 16) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 248k freed input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller (0x1166:0x0212 rev 0x93) at PCI slot 0000:00:0f.1 SvrWks CSB5: not 100% native mode: will probe irqs later SvrWks CSB5: simplex device: DMA forced ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio SvrWks CSB5: simplex device: DMA forced ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... Floppy drive(s): fd0 is 1.44M SCSI subsystem initialized FDC 0 is a National Semiconductor PC87306 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) hda: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... tg3.c:v3.86 (November 9, 2007) qla1280: Skipping AMI SubSys Vendor ID Chip ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17 megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 5:slot 0:func 0 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 18 megaraid: fw version:[1.80] bios version:[3.29] scsi0 : LSI Logic MegaRAID driver scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices scsi 0:0:6:0: Processor PE/PV 1x8 SCSI BP 1.1 PQ: 0 ANSI: 2 eth0: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5411)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:06:5b:f4:9d:13 eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[0] TSOcap[0] eth0: dma_rwctrl[76ff000f] dma_mask[64-bit] ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 19 eth1: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5411)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:06:5b:f4:9d:14 eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[0] TSOcap[0] eth1: dma_rwctrl[76ff000f] dma_mask[64-bit] scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices libata version 3.00 loaded. hda: ATAPI 24X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 scsi[0]: scanning scsi channel 2 [virtual] for logical drives scsi 0:2:0:0: Direct-Access MegaRAID LD 0 RAID5 349G 1.80 PQ: 0 ANSI: 2 Driver 'sd' needs updating - please use bus_type methods sd 0:2:0:0: [sda] 715550720 512-byte hardware sectors (366362 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00 sd 0:2:0:0: [sda] Asking for cache data failed sd 0:2:0:0: [sda] Assuming drive cache: write through sd 0:2:0:0: [sda] 715550720 512-byte hardware sectors (366362 MB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00 sd 0:2:0:0: [sda] Asking for cache data failed sd 0:2:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 <<5>scsi 0:0:6:0: Attached scsi generic sg0 type 3 sd 0:2:0:0: Attached scsi generic sg1 type 0 sda5 sda6 > sd 0:2:0:0: [sda] Attached SCSI disk Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 Linux agpgart interface v0.102 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled! Real Time Clock Driver v1.12ac input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k EXT3 FS on sda1, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. No dock devices found. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known. ** Loaded modules: Module Size Used by ipv6 240836 28 container 4864 0 battery 13572 0 ac 6116 0 sbs 14376 0 sbshc 6848 1 sbs dock 10384 0 video 18672 0 output 3744 1 video loop 16804 0 psmouse 36464 0 button 8432 0 serio_raw 6660 0 rtc 13052 0 i2c_piix4 8428 0 shpchp 31028 0 pci_hotplug 27712 1 shpchp sworks_agp 9440 0 agpgart 31688 1 sworks_agp i2c_core 22432 1 i2c_piix4 pcspkr 3200 0 evdev 11104 0 ext3 122920 2 jbd 43732 1 ext3 mbcache 8288 1 ext3 sg 33264 0 sd_mod 27200 4 ide_cd 36224 0 cdrom 32512 1 ide_cd ata_generic 7428 0 libata 144624 1 ata_generic generic 4388 0 [permanent] megaraid_mbox 30256 3 megaraid_mm 10464 1 megaraid_mbox qla1280 115884 0 scsi_mod 141164 5 sg,sd_mod,libata,megaraid_mbox,qla1280 floppy 54628 0 tg3 88996 0 serverworks 5796 0 [permanent] ide_core 108292 3 ide_cd,generic,serverworks thermal 16028 0 processor 36552 1 thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] (rev 22) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: sworks-agp 00:00.1 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: sworks-agp 00:00.2 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: sworks-agp 00:00.3 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel modules: sworks-agp 00:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0109] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 64 bytes Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at ec00 [size=256] Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at e0000000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:05.0 Class [ff00]: Dell Remote Access Card III [1028:0007] Subsystem: Dell Remote Access Card III [1028:0007] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at e8f8 [size=8] Region 2: I/O ports at e8e8 [size=8] Expansion ROM at fe000000 [disabled] [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:05.1 Class [ff00]: Dell Remote Access Card III [1028:0008] Subsystem: Dell Remote Access Card III [1028:0008] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 16 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e880 [size=64] Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: serial 00:05.2 Class [ff00]: Dell Remote Access Card III: BMC/SMIC device not present [1028:0009] Subsystem: Dell Remote Access Card III: BMC/SMIC device not present [1028:0009] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 7 Region 0: I/O ports at e8f4 [size=4] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93) Subsystem: Broadcom CSB5 South Bridge [1166:0201] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Kernel modules: sworks-agp, i2c-piix4 00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 82 [Master PriP]) Subsystem: Broadcom CSB5 IDE Controller [1166:0212] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 08b0 [size=16] Kernel driver in use: Serverworks_IDE Kernel modules: serverworks 00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225] Subsystem: Broadcom Device [1166:0230] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:10.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel modules: sworks-agp 00:10.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel modules: sworks-agp 00:11.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel modules: sworks-agp 00:11.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel modules: sworks-agp 00:12.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel modules: sworks-agp 00:12.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel modules: sworks-agp 03:01.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=03, secondary=04, subordinate=05, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fcd00000-fcffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Kernel modules: shpchp 04:00.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: fcf00000-fcffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Kernel modules: shpchp 04:01.0 SCSI storage controller [0100]: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor [1077:1216] (rev 06) Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID [101e:8493] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at dc00 [size=256] Region 1: Memory at fcdff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fce00000 [disabled] [size=128K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: qla1280 05:00.0 RAID bus controller [0104]: American Megatrends Inc. MegaRAID [101e:1960] (rev 20) Subsystem: Dell PowerEdge RAID Controller 3/DC [1028:0493] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fcf00000 [disabled] [size=32K] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: megaraid Kernel modules: megaraid_mbox 0a:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet [14e4:1644] (rev 14) Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at eff10000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- Address: ab882576feb438f0 Data: 60c1 Kernel driver in use: tg3 Kernel modules: tg3 0a:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet [14e4:1644] (rev 14) Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at eff00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data <?> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- Address: 8d22986a92542df4 Data: b3b8 Kernel driver in use: tg3 Kernel modules: tg3 -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_CH.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: pn libc6-i686 <none> (no description available) Versions of packages linux-image-2.6.24-1-686 suggests: ii grub 0.97-47lenny1 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.24 <none> (no description available) -- debconf information: linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686: linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/kimage-is-a-directory: linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
