--- Begin Message ---
Package: linux-image-2.6.24-etchnhalf.1-amd64
Version: 2.6.24-6~etchnhalf.7
Severity: critical
Justification: breaks the whole system
My amd64 system is subject to random lockups. Sometimes I can perform an
emergency sync, umount, and reboot using MagicSysRq. Other times I can
not. Sometimes I get a couple of days of uptime. Other times I have to
reboot several times a day.
This particular case was one of the times that I had to use the reset
button to restart the system. The system had become unresponsive after
running for about 48 hours without X running or any console user logins
(total uptime was ~ 5 days).
The first lock-up was:
Jan 30 00:49:14 stasis kernel: BUG: soft lockup - CPU#3 stuck for 11s!
[events/3:18]
Jan 30 00:49:14 stasis kernel: CPU 3:
Jan 30 00:49:14 stasis kernel: Modules linked in: isofs zlib_inflate
ext2 tcp_diag inet_diag ppdev parport_pc lp parport autofs4 ipv6 tun
nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc fuse dm_snapshot
dm_mirror dm_mod it87 hwmon_vid eeprom loop snd_usb_audio snd_usb_lib
snd_hwdep snd_seq_dummy snd_seq_oss snd_hda_intel snd_seq_midi
snd_rawmidi snd_pcm_oss snd_mixer_oss snd_seq_midi_event rtc_cmos
snd_seq snd_pcm rtc_core psmouse snd_timer floppy rtc_lib pwc
snd_seq_device i2c_piix4 pcspkr snd_page_alloc serio_raw compat_ioctl32
videodev snd v4l2_common i2c_core v4l1_compat soundcore usblp atl1
button mii sg evdev ext3 jbd mbcache raid10 raid1 md_mod ide_generic
generic atiixp ide_core sd_mod usbhid hid aic7xxx scsi_transport_spi
ata_generic ahci ehci_hcd libata scsi_mod ohci_hcd thermal processor fan
Jan 30 00:49:14 stasis kernel: Pid: 18, comm: events/3 Not tainted
2.6.24-etchnhalf.1-amd64 #1
Jan 30 00:49:14 stasis kernel: RIP: 0010:[<ffffffff8021bd36>]
[<ffffffff8021bd36>] __smp_call_function_mask+0x9c/0xc0
Jan 30 00:49:14 stasis kernel: RSP: 0018:ffff81012b763e00 EFLAGS: 00000297
Jan 30 00:49:14 stasis kernel: RAX: 00000000000008fc RBX: 0000000000000003 RCX:
0000000000000001
Jan 30 00:49:14 stasis kernel: RDX: 00000000000008fc RSI: 00000000000000fc RDI:
0000000000000007
Jan 30 00:49:14 stasis kernel: RBP: ffff81000103c930 R08: 00000000000000f9 R09:
ffff81011401fac8
Jan 30 00:49:14 stasis kernel: R10: ffff81012b72abe8 R11: 0000000000000000 R12:
0000000000000000
Jan 30 00:49:14 stasis kernel: R13: 0000000300000282 R14: ffff81012b763ea0 R15:
0000000200000001
Jan 30 00:49:14 stasis kernel: FS: 00002b04ef9bccc0(0000)
GS:ffff81012b6b78c0(0000) knlGS:00000000f6dfdb90
Jan 30 00:49:14 stasis kernel: CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Jan 30 00:49:14 stasis kernel: CR2: 00002b8ba51cf000 CR3: 0000000114053000 CR4:
00000000000006e0
Jan 30 00:49:14 stasis kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
Jan 30 00:49:14 stasis kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
Jan 30 00:49:14 stasis kernel: Jan 30 00:49:14 stasis kernel: Call Trace:
Jan 30 00:49:14 stasis kernel: [<ffffffff80216193>] mcheck_check_cpu+0x0/0x37
Jan 30 00:49:14 stasis kernel: [<ffffffff8023e28b>] lock_timer_base+0x26/0x4c
Jan 30 00:49:14 stasis kernel: [<ffffffff80216193>] mcheck_check_cpu+0x0/0x37
Jan 30 00:49:14 stasis kernel: [<ffffffff8021bdb8>]
smp_call_function_mask+0x5e/0x70
Jan 30 00:49:14 stasis kernel: [<ffffffff80215a31>] mcheck_timer+0x0/0x7c
Jan 30 00:49:14 stasis kernel: [<ffffffff80216193>] mcheck_check_cpu+0x0/0x37
Jan 30 00:49:14 stasis kernel: [<ffffffff8023a243>] on_each_cpu+0x10/0x22
Jan 30 00:49:14 stasis kernel: [<ffffffff80215a4e>] mcheck_timer+0x1d/0x7c
Jan 30 00:49:14 stasis kernel: [<ffffffff8027d1f0>] vmstat_update+0x0/0x31
Jan 30 00:49:14 stasis kernel: [<ffffffff802448dd>] run_workqueue+0x7f/0x10b
Jan 30 00:49:14 stasis kernel: [<ffffffff802451ef>] worker_thread+0x0/0xe4
Jan 30 00:49:14 stasis kernel: [<ffffffff802452c9>] worker_thread+0xda/0xe4
Jan 30 00:49:14 stasis kernel: [<ffffffff802481fe>]
autoremove_wake_function+0x0/0x2e
Jan 30 00:49:14 stasis kernel: [<ffffffff802480de>] kthread+0x47/0x75
Jan 30 00:49:14 stasis kernel: [<ffffffff8020cc48>] child_rip+0xa/0x12
Jan 30 00:49:14 stasis kernel: [<ffffffff80248097>] kthread+0x0/0x75
Jan 30 00:49:14 stasis kernel: [<ffffffff8020cc3e>] child_rip+0x0/0x12
This repeated 1703 times until the system became totally unresponsive
with:
Jan 30 06:25:05 stasis kernel: BUG: soft lockup - CPU#3 stuck for 11s!
[events/3:18]
Jan 30 06:25:05 stasis kernel: CPU 3:
Jan 30 06:25:05 stasis kernel: Modules linked in: isofs zlib_inflate ext2
tcp_diag inet_diag ppdev parport_pc lp parport autofs4 ipv6 tun nfsd auth_rpc
gss exportfs nfs lockd nfs_acl sunrpc fuse dm_snapshot dm_mirror dm_mod it87
hwmon_vid eeprom loop snd_usb_audio snd_usb_lib snd_hwdep snd_seq_dummy sn
d_seq_oss snd_hda_intel snd_seq_midi snd_rawmidi snd_pcm_oss snd_mixer_oss
snd_seq_midi_event rtc_cmos snd_seq snd_pcm rtc_core psmouse snd_timer flopp
y rtc_lib pwc snd_seq_device i2c_piix4 pcspkr snd_page_alloc serio_raw
compat_ioctl32 videodev snd v4l2_common i2c_core v4l1_compat soundcore usblp atl
1 button mii sg evdev ext3 jbd mbcache raid10 raid1 md_mod ide_generic generic
atiixp ide_core sd_mod usbhid hid aic7xxx scsi_transport_spi ata_generic
ahci ehci_hcd libata scsi_mod ohci_hcd thermal processor fan
Jan 30 06:25:05 stasis kernel: Pid: 18, comm: events/3 Not tainted
2.6.24-etchnhalf.1-amd64 #1
Jan 30 06:25:05 stasis kernel: RIP: 0010:[<ffffffff8021bd3a>]
[<ffffffff8021bd3a>] __smp_call_function_mask+0xa0/0xc0
Jan 30 06:25:05 stasis kernel: RSP: 0018:ffff81012b763e00 EFLAGS: 00000297
Jan 30 06:25:05 stasis kernel: RAX: 00000000000008fc RBX: 0000000000000003 RCX:
0000000000000001
Jan 30 06:25:05 stasis kernel: RDX: 00000000000008fc RSI: 00000000000000fc RDI:
0000000000000007
Jan 30 06:25:05 stasis kernel: RBP: ffff81000103c930 R08: 00000000000000f9 R09:
ffff81011401fac8
Jan 30 06:25:05 stasis kernel: R10: ffff81012b72abe8 R11: 0000000000000000 R12:
0000000000000000
Jan 30 06:25:05 stasis kernel: R13: 0000000300000282 R14: ffff81012b763ea0 R15:
0000000200000001
Jan 30 06:25:05 stasis kernel: FS: 00002b04ef9bccc0(0000)
GS:ffff81012b6b78c0(0000) knlGS:00000000f6dfdb90
Jan 30 06:25:05 stasis kernel: CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
Jan 30 06:25:05 stasis kernel: CR2: 00002b8ba51cf000 CR3: 0000000114053000 CR4:
00000000000006e0
Jan 30 06:25:05 stasis kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
Jan 30 06:25:05 stasis kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
Jan 30 06:25:05 stasis kernel:
Jan 30 06:25:05 stasis kernel: Call Trace:
Jan 30 06:25:05 stasis kernel: [<ffffffff80216193>] mcheck_check_cpu+0x0/0x37
Jan 30 06:25:05 stasis kernel: [<ffffffff8023e28b>] lock_timer_base+0x26/0x4c
Jan 30 06:25:05 stasis kernel: [<ffffffff80216193>] mcheck_check_cpu+0x0/0x37
Jan 30 06:25:05 stasis kernel: [<ffffffff8021bdb8>]
smp_call_function_mask+0x5e/0x70
Jan 30 06:25:05 stasis kernel: [<ffffffff80215a31>] mcheck_timer+0x0/0x7c
Jan 30 06:25:05 stasis kernel: [<ffffffff80216193>] mcheck_check_cpu+0x0/0x37
Jan 30 06:25:05 stasis kernel: [<ffffffff8023a243>] on_each_cpu+0x10/0x22
Jan 30 06:25:05 stasis kernel: [<ffffffff80215a4e>] mcheck_timer+0x1d/0x7c
Jan 30 06:25:05 stasis kernel: [<ffffffff8027d1f0>] vmstat_update+0x0/0x31
Jan 30 06:25:05 stasis kernel: [<ffffffff802448dd>] run_workqueue+0x7f/0x10b
Jan 30 06:25:05 stasis kernel: [<ffffffff802451ef>] worker_thread+0x0/0xe4
Jan 30 06:25:05 stasis kernel: [<ffffffff802452c9>] worker_thread+0xda/0xe4
Jan 30 06:25:05 stasis kernel: [<ffffffff802481fe>]
autoremove_wake_function+0x0/0x2e
Jan 30 06:25:05 stasis kernel: [<ffffffff802480de>] kthread+0x47/0x75
Jan 30 06:25:05 stasis kernel: [<ffffffff8020cc48>] child_rip+0xa/0x12
Jan 30 06:25:05 stasis kernel: [<ffffffff80248097>] kthread+0x0/0x75
Jan 30 06:25:05 stasis kernel: [<ffffffff8020cc3e>] child_rip+0x0/0x12
Jan 30 06:25:05 stasis kernel:
Nothing else was logged until I hard reset the system on Feb 1 20:34:43
-- Package-specific info:
** Version:
Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.7)
(da...@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21))
#1 SMP Tue Dec 2 17:21:26 UTC 2008
** Command line:
root=/dev/md0 ro
** Not tainted
** Kernel log:
target6:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target6:0:5: Domain Validation skipping write tests
target6:0:5: Ending Domain Validation
hiddev97hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS NS
1250 LCD FW:846.H2 .D USB FW:H2 ] on usb-0000:00:12.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Probing IDE interface ide0...
Probing IDE interface ide1...
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: md0 stopped.
md: bind<sdf1>
md: bind<sdc2>
md: bind<sdd2>
md: bind<sda2>
md: md0: raid array is not clean -- starting background reconstruction
raid10: raid set md0 active with 4 out of 4 devices
md: resync of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec)
for resync.
md: using 128k window, over a total of 585585152 blocks.
md: md1 stopped.
md: bind<sde>
raid1: raid set md1 active with 1 out of 2 mirrors
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: md0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 36323405
ext3_orphan_cleanup: deleting unreferenced inode 36323336
ext3_orphan_cleanup: deleting unreferenced inode 36323335
ext3_orphan_cleanup: deleting unreferenced inode 36323334
ext3_orphan_cleanup: deleting unreferenced inode 36323333
EXT3-fs: md0: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 125 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
scsi 6:0:5:0: Attached scsi generic sg6 type 6
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
atl1 0000:02:00.0: version 2.0.7
usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
usbcore: registered new interface driver usblp
Linux video capture interface: v2.00
input: PC Speaker as /class/input/input5
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 &
PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10
and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300
and VCS-UM100.
pwc: Philips SPC 900NC USB webcam detected.
pwc: Registered as /dev/video0.
usbcore: registered new interface driver Philips webcam
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pnp: the driver 'rtc_cmos' has been registered
rtc_cmos 00:05: disabling not supported
rtc_cmos: probe of 00:05 failed with error -16
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
usbcore: registered new interface driver snd-usb-audio
Adding 240932k swap on /dev/sdb1. Priority:-1 extents:1 across:240932k
Adding 240932k swap on /dev/sdd1. Priority:-2 extents:1 across:240932k
EXT3 FS on md0, internal journal
loop: module loaded
it87: Found IT8716F chip at 0xe80, revision 3
it87: in3 is VCC (+5V)
hwmon-vid: Unknown VRM version of your x86 CPU
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-de...@redhat.com
fuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tun0: Disabled Privacy Extensions
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
gn[4885]: segfault at 0 rip 40ac50 rsp 7fff383b9b00 error 4
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
** Loaded modules:
Module Size Used by
tcp_diag 6400 0
inet_diag 17808 2 tcp_diag
ppdev 13960 0
parport_pc 34984 0
lp 17604 0
parport 45068 3 ppdev,parport_pc,lp
autofs4 28936 3
ipv6 287016 43
tun 16768 1
nfsd 262312 17
auth_rpcgss 53408 1 nfsd
exportfs 9600 1 nfsd
nfs 259056 0
lockd 73520 3 nfsd,nfs
nfs_acl 8320 2 nfsd,nfs
sunrpc 201736 11 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
fuse 53936 1
dm_snapshot 22216 0
dm_mirror 27264 0
dm_mod 68344 2 dm_snapshot,dm_mirror
it87 28688 0
hwmon_vid 7552 1 it87
eeprom 12944 0
loop 23044 0
snd_usb_audio 96032 0
snd_usb_lib 22656 1 snd_usb_audio
snd_hwdep 14984 1 snd_usb_audio
snd_seq_dummy 8708 0
snd_seq_oss 36992 0
snd_hda_intel 362408 1
snd_seq_midi 13632 0
rtc_cmos 13368 0
snd_rawmidi 31008 2 snd_usb_lib,snd_seq_midi
snd_pcm_oss 46880 0
snd_mixer_oss 21632 1 snd_pcm_oss
rtc_core 24972 1 rtc_cmos
floppy 66920 0
snd_seq_midi_event 12672 2 snd_seq_oss,snd_seq_midi
i2c_piix4 13836 0
rtc_lib 7808 1 rtc_core
snd_pcm 89736 3 snd_usb_audio,snd_hda_intel,snd_pcm_oss
pwc 90944 0
i2c_core 30080 2 eeprom,i2c_piix4
snd_seq 59136 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
psmouse 46108 0
snd_timer 28936 2 snd_pcm,snd_seq
compat_ioctl32 13184 1 pwc
pcspkr 7936 0
serio_raw 12036 0
snd_page_alloc 15504 2 snd_hda_intel,snd_pcm
videodev 32512 1 pwc
v4l2_common 24448 2 compat_ioctl32,videodev
snd_seq_device 13076 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
v4l1_compat 16516 1 videodev
usblp 19840 0
snd 66280 13
snd_usb_audio,snd_hwdep,snd_seq_oss,snd_hda_intel,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 13344 1 snd
atl1 39948 0
mii 10368 1 atl1
button 14112 0
sg 42008 0
evdev 17152 0
ext3 139664 2
jbd 56232 1 ext3
mbcache 14208 1 ext3
raid10 27264 1
raid1 27904 1
md_mod 84764 3 raid10,raid1
ide_generic 5632 0 [permanent]
generic 9860 0 [permanent]
usbhid 35168 0
hid 42048 1 usbhid
sd_mod 33792 13
atiixp 9616 0 [permanent]
ide_core 145432 3 ide_generic,generic,atiixp
aic7xxx 163932 0
scsi_transport_spi 31744 1 aic7xxx
ata_generic 13188 0
ehci_hcd 39948 0
ahci 34820 8
ohci_hcd 28292 0
libata 164016 2 ata_generic,ahci
scsi_mod 170808 5 sg,sd_mod,aic7xxx,scsi_transport_spi,libata
thermal 22944 0
processor 45416 1 thermal
fan 9992 0
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge
[1022:9600]
Subsystem: ATI Technologies Inc Device [1002:7910]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
[1002:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1277
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
[1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller
[1002:4398] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc Device [1002:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller
[1002:4398] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller
[1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f9ffa800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 3a)
Subsystem: ASUSTeK Computer Inc. Device [1043:82f1]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller
[1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82f1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ATIIXP_IDE
Kernel modules: ata_generic, atiixp, generic
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 16
Region 0: Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller
[1002:439d]
Subsystem: ATI Technologies Inc Device [1002:4383]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9ff9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce 9600
GT] [10de:0622] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at d800 [size=128]
Expansion ROM at fe980000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidiafb, nvidia
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at feaa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
Kernel modules: atl1
03:06.0 SCSI storage controller [0100]: Adaptec AIC-7892A U160/m [9005:0080]
(rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller [9005:62a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
BIST result: 00
Region 0: I/O ports at e800 [disabled] [size=256]
Region 1: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.24-etchnhalf.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-etchnhalf.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.24-etchnhalf.1-amd64 recommends no packages.
Versions of packages linux-image-2.6.24-etchnhalf.1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii lilo 1:22.8-7 LInux LOader - The Classic OS load
pn linux-doc-2.6.24 <none> (no description available)
-- debconf-show failed
--- End Message ---
