Your message dated Sat, 20 Jun 2009 09:32:24 +0200
with message-id <[email protected]>
and subject line Re: Bug#533733: linux-image-2.6.26-2-686: the post install
setting to use /sbin/update-grub is wrong as /usr/bin/update-grub is needed
has caused the Debian Bug report #533733,
regarding linux-image-2.6.26-2-686: the post install setting to use
/sbin/update-grub is wrong as /usr/bin/update-grub is needed
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
533733: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=533733
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-15lenny3
Severity: serious
Justification: 2
As per summary. In some installations of this kernel, a file
/etc/kernel-img.conf is created with a postinst reference to a non-existent
/sbin/update-grud.
The result is that aptitude keeps reinstalling this package.
On systems where this problem occurs, the /etc/kernal-img.conf file has an
incorrect reference.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15lenny3) ([email protected]) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28
15:39:35 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-2-686 root=UUID=ed080c92-d702-47ca-9892-1d9590eefc0f
ro
** Not tainted
** Kernel log:
[ 5.106545] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.107946] mice: PS/2 mouse device common for all mice
[ 5.109331] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.109481] rtc0: alarms up to one day
[ 5.109904] cpuidle: using governor ladder
[ 5.109998] cpuidle: using governor menu
[ 5.110106] No iBFT detected.
[ 5.114171] TCP cubic registered
[ 5.114271] NET: Registered protocol family 17
[ 5.114390] Using IPI No-Shortcut mode
[ 5.115673] registered taskstats version 1
[ 5.116431] rtc_cmos 00:03: setting system clock to 2009-06-19 17:09:37 UTC
(1245431377)
[ 5.118213] Freeing unused kernel memory: 244k freed
[ 5.142671] input: AT Translated Set 2 keyboard as /class/input/input0
[ 5.924232] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 8.935474] usbcore: registered new interface driver usbfs
[ 8.935806] usbcore: registered new interface driver hub
[ 8.936327] usbcore: registered new device driver usb
[ 8.971138] SCSI subsystem initialized
[ 8.987540] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 8.987823] PCI: setting IRQ 10 as level-triggered
[ 8.987848] PCI: Found IRQ 10 for device 0000:00:0c.0
[ 8.988567] tulip0: MII transceiver #1 config 3000 status 7829 advertising
01e1.
[ 8.993838] eth0: Lite-On 82c168 PNIC rev 32 at Port 0x6c00,
00:a0:cc:56:91:5f, IRQ 10.
[ 9.007552] Floppy drive(s): fd0 is 1.44M
[ 9.022822] USB Universal Host Controller Interface driver v3.0
[ 9.023200] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 9.023783] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
number 1
[ 9.023988] uhci_hcd 0000:00:07.2: irq 10, io base 0x00006400
[ 9.024795] usb usb1: configuration #1 chosen from 1 choice
[ 9.025143] hub 1-0:1.0: USB hub found
[ 9.025282] hub 1-0:1.0: 2 ports detected
[ 9.148046] FDC 0 is a post-1991 82077
[ 9.149481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.149595] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.149710] usb usb1: Product: UHCI Host Controller
[ 9.149801] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 9.149895] usb usb1: SerialNumber: 0000:00:07.2
[ 9.150246] hub 1-0:1.0: over-current change on port 1
[ 9.219738] libata version 3.00 loaded.
[ 9.225752] PCI: setting IRQ 11 as level-triggered
[ 9.225783] PCI: Found IRQ 11 for device 0000:00:0a.0
[ 24.268196] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 24.268215] <Adaptec 2940A Ultra SCSI adapter>
[ 24.268227] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 24.268240]
[ 24.361419] scsi 0:0:0:0: Direct-Access QUANTUM FIREBALL ST6.4S 0F0C
PQ: 0 ANSI: 2
[ 24.361624] scsi0:A:0:0: Tagged Queuing enabled. Depth 8
[ 24.361821] target0:0:0: Beginning Domain Validation
[ 24.366392] Uniform Multi-Platform E-IDE driver
[ 24.366522] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 24.371205] target0:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 24.376850] target0:0:0: Domain Validation skipping write tests
[ 24.376970] target0:0:0: Ending Domain Validation
[ 24.398976] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot
0000:00:07.1
[ 24.399184] PIIX4: not 100% native mode: will probe irqs later
[ 24.399318] ide0: BM-DMA at 0xf000-0xf007
[ 24.399437] ide1: BM-DMA at 0xf008-0xf00f
[ 24.399538] Probing IDE interface ide0...
[ 24.968417] Probing IDE interface ide1...
[ 25.536390] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.536644] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.086885] Driver 'sd' needs updating - please use bus_type methods
[ 26.096422] sd 0:0:0:0: [sda] 12772516 512-byte hardware sectors (6540 MB)
[ 26.106071] sd 0:0:0:0: [sda] Write Protect is off
[ 26.106180] sd 0:0:0:0: [sda] Mode Sense: 9f 00 00 08
[ 26.112985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 26.115642] sd 0:0:0:0: [sda] 12772516 512-byte hardware sectors (6540 MB)
[ 26.125209] sd 0:0:0:0: [sda] Write Protect is off
[ 26.125313] sd 0:0:0:0: [sda] Mode Sense: 9f 00 00 08
[ 26.132277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 26.132428] sda: sda1 sda2 sda3
[ 26.177144] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.144687] PM: Starting manual resume from disk
[ 27.366277] kjournald starting. Commit interval 5 seconds
[ 27.366468] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.202153] udevd version 125 started
[ 37.921123] input: PC Speaker as /class/input/input1
[ 39.785133] parport_pc 00:0e: reported by Plug and Play BIOS
[ 39.785336] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 41.256860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.421030] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.952768] Linux agpgart interface v0.103
[ 42.074680] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 42.142977] agpgart: Detected an Intel 440LX Chipset.
[ 42.153026] agpgart: AGP aperture is 64M @ 0xe0000000
[ 42.660879] Error: Driver 'pcspkr' is already registered, aborting...
[ 43.348866] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 47.656953] Adding 248996k swap on /dev/sda2. Priority:-1 extents:1
across:248996k
[ 48.605319] EXT3 FS on sda3, internal journal
[ 51.370428] device-mapper: uevent: version 1.0.3
[ 51.376025] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[email protected]
[ 52.696589] kjournald starting. Commit interval 5 seconds
[ 52.700406] EXT3 FS on sda1, internal journal
[ 52.700558] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.398828] NET: Registered protocol family 10
[ 58.402671] lo: Disabled Privacy Extensions
[ 58.480481] eth0: Setting full-duplex based on MII#1 link partner capability
of 45e1.
[ 69.084311] eth0: no IPv6 routers present
[ 70.892852] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
** Loaded modules:
Module Size Used by
ipv6 235364 16
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
ide_disk 10496 0
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
psmouse 32336 0
snd_pcm 62596 0
intel_agp 22556 1
i2c_piix4 7216 0
serio_raw 4740 0
snd_timer 17800 1 snd_pcm
agpgart 28776 1 intel_agp
i2c_core 19828 1 i2c_piix4
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
shpchp 25528 0
snd_page_alloc 7816 1 snd_pcm
pci_hotplug 23460 1 shpchp
parport_pc 22500 0
parport 30988 1 parport_pc
pcspkr 2432 0
evdev 8000 0
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 4
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96136 4 ide_disk,ide_cd_mod,piix,ide_pci_generic
ata_generic 4676 0
aic7xxx 117592 3
scsi_transport_spi 19840 1 aic7xxx
libata 140416 1 ata_generic
uhci_hcd 18672 0
floppy 47748 0
tulip 44064 0
scsi_mod 129324 4 sd_mod,aic7xxx,scsi_transport_spi,libata
usbcore 118224 2 uhci_hcd
dock 8304 1 libata
thermal_sys 10856 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440LX/EX - 82443LX/EX Host bridge
[8086:7180] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge
[8086:7181] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: a8000000-afffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at 6400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:0a.0 SCSI storage controller [0100]: Adaptec AIC-7861 [9004:6178] (rev 03)
Subsystem: Adaptec AHA-2940AU Single [9004:7861]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6800 [disabled] [size=256]
Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 20040000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
00:0c.0 Ethernet controller [0200]: Lite-On Communications Inc LNE100TX
[11ad:0002] (rev 20)
Subsystem: Netgear FA310TX [1385:f004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 6c00 [size=256]
Region 1: Memory at e4001000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=256K]
Kernel driver in use: tulip
Kernel modules: tulip
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV15 [GeForce2
GTS/Pro] [10de:0150] (rev a4) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation GeForce2 GTS [10de:002e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a8000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at df000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Kernel modules: nvidiafb
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
--- Begin Message ---
On Sat, Jun 20, 2009 at 01:04:27PM +1000, Terryc wrote:
> As per summary. In some installations of this kernel, a file
> /etc/kernel-img.conf is created with a postinst reference to a non-existent
> /sbin/update-grud.
No. It only creates this file with 5 options if necessary. the postrm
hook is not part.
You need to bring much more about this to be actually a bug.
Bastian
--- End Message ---
