Sorry , i made i big mistake . I'm very confuse. The problem not coming from the P410i card but from a P212 SAS PCI controller which is directly attached to the HP MSL Tape library. same driver module is used for both card. I have no information and device for P212 card and can not see the tape library on debian.
/proc/scsi/scsi on debian Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TEAC Model: DV-28S-V Rev: C.0F Type: CD-ROM ANSI SCSI revision: 05 /proc/scsi/scsi on Redhat Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TEAC Model: DV-28S-V Rev: C.0F Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: Ultrium 3-SCSI Rev: C25W Type: Sequential-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: MSL G3 Series Rev: 4.60 Type: Medium Changer ANSI SCSI revision: 05 Sorry bad informations in my previous email On Wed, September 9, 2009 12:40 am, Ben Hutchings wrote: > On Tue, 2009-09-08 at 23:24 +0200, Olivier JUDITH wrote: >> -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> >> Hi, >> >> I recently received 2 HP DL360 G6 with additional SAS controller HP >> P410i ZM (Zero memory) to interface with a HPLTO3 Library . >> I started Debian lenny 5.02 (2.6.26-2) but SAS controller is not >> detected . > > Linux 2.6.26 includes support for P410i and the ZM configuration. I > think the problem may lie elsewhere. > > When you say you 'started Debian', do you mean you started to install > it, or that you installed it but it did not boot afterwards? > > Can you send a kernel log from the Debian kernel? If you cannot save it > to a file, please take a photograph. > > Ben. > > -- > Ben Hutchings > Who are all these weirdos? - David Bowie, about L-Space IRC channel #afp > -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org