Hi,
I made test on HP DL160 G6 and works without problem. Please add support
for this NIC in next official release of kernel package.
Thanks
Package: linux-2.6
Version: 2.6.26-20.bug522922.1
Severity: normal
Linux version 2.6.26-2-amd64 (Debian 2.6.26-20.bug522922.1)
(da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Sat Oct 24 15:58:33 UTC 2009
** Model information
sys_vendor: HP
product_name: ProLiant DL160 G6
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: O33
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:26:55:7b:6e:b0 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:26:55:7b:6e:b1 brd ff:ff:ff:ff:ff:ff
inet 192.168.16.58/24 brd 192.168.16.255 scope global eth1
inet6 fe80::226:55ff:fe7b:6eb1/64 scope link
valid_lft forever preferred_lft forever
** PCI devices:
05:00.1 Ethernet controller [0200]: Intel Corporation Device [8086:10c9]
(rev 01)
Subsystem: Hewlett-Packard Company Device [103c:323f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 42
Region 0: Memory at fbee0000 (32-bit, non-prefetchable)
[size=128K]
Region 1: Memory at fbec0000 (32-bit, non-prefetchable)
[size=128K]
Region 2: I/O ports at ec00 [size=32]
Region 3: Memory at fbebc000 (32-bit, non-prefetchable)
[size=16K]
Expansion ROM at fbe80000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/16 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
--
Artur Kaszuba, System Administrator
Poznan Supercomputing & Networking Center
Supercomputing Department
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
