--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: important
I have the following NIC:
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller (rev 19)
It works on the 'sky2' driver if plugged directly into the WAN properly, but
there is a *huge* issue when plugged in through a router.
It drops major UDP packets. TCP speed is also immensely effected. Normally, I
get 5000 kbps, but through a router i get 300. Almost all UDP packets are lost.
The *solution* to this is to use the deprecated 'sk98lin' driver instead of
'sky2'.. which I did on Etch and solved the issue 100%. Problem is I can't
install the same sk98lin package I've found on lenny. It complains about the
kernel needing to recomplie, and if I attempt this and use the resultant
kernel.. networking doesn't work at all.
Please can you update the kernel with this driver installed, or supply it as a
separate package? My home network is basically broken without this, and I don't
want to downgrade completely to Etch. Thanks.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC
2009
** Command line:
root=/dev/sda1 ro quiet noapic nolapic acpi-off
** Tainted: P (1)
** Kernel log:
[ 7.245074] ACPI: PCI Interrupt 0000:06:03.0[A] -> Link [LNKE] -> GSI 10
(level, low) -> IRQ 10
[ 7.245128] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 7.245159] firmware: requesting ipw2200-bss.fw
[ 7.249666] input: PC Speaker as /class/input/input6
[ 7.622034] input: ImPS/2 Logitech Wheel Mouse as /class/input/input7
[ 7.828151] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[ 7.828212] ipw2200: Unable to load firmware: -2
[ 7.828273] ipw2200: failed to register network device
[ 7.828392] ACPI: PCI interrupt for device 0000:06:03.0 disabled
[ 7.828402] ipw2200: probe of 0000:06:03.0 failed with error -5
[ 7.831955] ACPI: PCI Interrupt 0000:06:02.0[A] -> Link [LNKH] -> GSI 5
(level, low) -> IRQ 5
[ 7.831965] saa7133[0]: found at 0000:06:02.0, rev: 208, irq: 5, latency:
181, mmio: 0xb4006000
[ 7.831972] saa7133[0]: subsystem: 5168:3307, board: LifeView FlyDVB-T
Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected]
[ 7.831983] saa7133[0]: board init: gpio is 10000
[ 7.984024] saa7133[0]: i2c eeprom 00: 68 51 07 33 54 20 1c 00 43 43 a9 1c
55 d2 b2 92
[ 7.984033] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff
ff ff ff ff
[ 7.984039] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 17
ff ff ff ff
[ 7.984046] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984052] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 22 15
ff ff ff ff
[ 7.984059] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984065] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984071] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984078] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984084] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984091] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984097] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984103] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984110] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984116] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 7.984123] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 8.224074] tuner' 1-004b: chip found @ 0x96 (saa7133[0])
[ 8.236573] cs: IO port probe 0x100-0x3af: clean.
[ 8.236573] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 8.236573] cs: IO port probe 0x820-0x8ff: clean.
[ 8.236573] cs: IO port probe 0xc00-0xcf7: clean.
[ 8.240765] cs: IO port probe 0xa00-0xaff: clean.
[ 8.312028] tda829x 1-004b: setting tuner address to 61
[ 8.388030] tda829x 1-004b: type set to tda8290+75a
[ 11.812291] saa7133[0]: registered device video0 [v4l2]
[ 11.812306] saa7133[0]: registered device vbi0
[ 11.812322] saa7133[0]: registered device radio0
[ 11.876462] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 11.876466] ACPI: PCI Interrupt 0000:06:04.3[D] -> Link [LNKF] -> GSI 11
(level, low) -> IRQ 11
[ 12.000091] DVB: registering new adapter (saa7133[0])
[ 12.000096] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[ 12.072030] tda1004x: setting up plls for 48MHz sampling clock
[ 14.068029] tda1004x: found firmware revision 29 -- ok
[ 14.680424] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1
across:2650684k
[ 15.079311] EXT3 FS on sda1, internal journal
[ 15.593400] loop: module loaded
[ 17.106575] sky2 eth0: enabling interface
[ 18.759053] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 19.911888] NET: Registered protocol family 10
[ 19.912236] lo: Disabled Privacy Extensions
[ 20.341936] lp: driver loaded but no devices found
[ 20.392081] ppdev: user-space parallel port driver
[ 30.208019] eth0: no IPv6 routers present
[ 30.256191] Bluetooth: Core ver 2.11
[ 30.257375] NET: Registered protocol family 31
[ 30.257379] Bluetooth: HCI device and connection manager initialized
[ 30.257381] Bluetooth: HCI socket layer initialized
[ 30.274517] Bluetooth: L2CAP ver 2.9
[ 30.274522] Bluetooth: L2CAP socket layer initialized
[ 30.291535] Bluetooth: RFCOMM socket layer initialized
[ 30.291545] Bluetooth: RFCOMM TTY layer initialized
[ 30.291546] Bluetooth: RFCOMM ver 1.8
[ 33.630054] nvidia: module license 'NVIDIA' taints kernel.
[ 33.897587] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10
(level, low) -> IRQ 10
[ 33.897607] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 33.897815] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun
4 23:43:17 PDT 2008
[ 45.460032] eth0: no IPv6 routers present
[ 73.552054] usb 1-1: new full speed USB device using uhci_hcd and address 5
[ 73.735121] usb 1-1: configuration #1 chosen from 1 choice
[ 73.752737] usb 1-1: New USB device found, idVendor=04a5, idProduct=610b
[ 73.752750] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 73.752757] usb 1-1: Product: <USB PRODUCT>
[ 73.752762] usb 1-1: Manufacturer: <USB MF>
[ 73.752767] usb 1-1: SerialNumber: 0002F0EB6D9D8C97
[ 73.852122] Initializing USB Mass Storage driver...
[ 73.853347] scsi2 : SCSI emulation for USB Mass Storage devices
[ 73.853681] usbcore: registered new interface driver usb-storage
[ 73.853686] USB Mass Storage support registered.
[ 73.876733] usb-storage: device found at 5
[ 73.876738] usb-storage: waiting for device to settle before scanning
[ 78.877475] usb-storage: device scan complete
[ 78.880391] scsi 2:0:0:0: Direct-Access BenQ Joybee 102R 0100
PQ: 0 ANSI: 4
[ 78.885443] sd 2:0:0:0: [sdb] 250624 512-byte hardware sectors (128 MB)
[ 78.888443] sd 2:0:0:0: [sdb] Write Protect is off
[ 78.888453] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 78.888458] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 78.900435] sd 2:0:0:0: [sdb] 250624 512-byte hardware sectors (128 MB)
[ 78.903434] sd 2:0:0:0: [sdb] Write Protect is off
[ 78.903444] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 78.903449] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 78.903455] sdb: sdb1
[ 78.910605] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 78.910688] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 81.031117] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 4100.291645] spurious 8259A interrupt: IRQ7.
[ 5533.544089] usb 1-1: USB disconnect, address 5
** Loaded modules:
Module Size Used by
nls_utf8 1760 0
nls_cp437 5568 0
vfat 9152 0
fat 40864 1 vfat
nls_base 6820 4 nls_utf8,nls_cp437,vfat,fat
usb_storage 76032 0
nvidia 7086148 36
rfcomm 28272 0
l2cap 17248 5 rfcomm
bluetooth 44900 4 rfcomm,l2cap
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
ipv6 235300 14
acpi_cpufreq 6796 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
cpufreq_conservative 5960 0
cpufreq_ondemand 6476 1
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
sbp2 18572 0
loop 12748 0
tda1004x 13348 1
saa7134_dvb 17580 0
videobuf_dvb 4580 1 saa7134_dvb
dvb_core 66528 2 saa7134_dvb,videobuf_dvb
tda827x 9124 2
tda8290 12164 1
tuner 21960 0
pcmcia 29548 0
pcspkr 2432 0
saa7134 125044 1 saa7134_dvb
tifm_7xx1 5216 0
videodev 27520 2 tuner,saa7134
v4l1_compat 12260 1 videodev
ipw2200 123560 0
tifm_core 7548 1 tifm_7xx1
compat_ioctl32 1312 1 saa7134
ieee80211 27048 1 ipw2200
ieee80211_crypt 5124 1 ieee80211
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
v4l2_common 10240 2 tuner,saa7134
videobuf_dma_sg 11140 2 saa7134_dvb,saa7134
serio_raw 4740 0
firmware_class 6816 4 tda1004x,saa7134_dvb,pcmcia,ipw2200
videobuf_core 16100 3 videobuf_dvb,saa7134,videobuf_dma_sg
ir_kbd_i2c 7120 1 saa7134
ir_common 39620 2 saa7134,ir_kbd_i2c
tveeprom 10980 1 saa7134
psmouse 32336 0
i2c_i801 7920 0
i2c_core 19828 11
nvidia,tda1004x,saa7134_dvb,tda827x,tda8290,tuner,saa7134,v4l2_common,ir_kbd_i2c,tveeprom,i2c_i801
rng_core 3940 0
iTCO_wdt 9508 0
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
usblp 10592 0
snd_hda_intel 324248 16
snd_pcm 62596 6 snd_hda_intel
snd_seq 41456 0
snd_timer 17800 7 snd_pcm,snd_seq
snd_seq_device 6380 1 snd_seq
container 3456 0
snd 45604 27
snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
video 16432 5
output 2912 1 video
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
button 6096 0
battery 10180 0
ac 4196 0
intel_agp 22332 0
agpgart 28776 2 nvidia,intel_agp
evdev 8000 5
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
sg 26964 0
sr_mod 13316 0
cdrom 30176 1 sr_mod
sd_mod 22200 3
ata_piix 14180 3
ahci 23596 0
ata_generic 4676 0
libata 140384 3 ata_piix,ahci,ata_generic
scsi_mod 129356 6 usb_storage,sbp2,sg,sr_mod,sd_mod,libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
ide_core 96168 1 ide_pci_generic
sdhci 13060 0
mmc_core 39932 1 sdhci
ohci1394 24944 0
ieee1394 75800 2 sbp2,ohci1394
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 6 usb_storage,usbhid,usblp,ehci_hcd,uhci_hcd
sky2 37380 0
thermal 15228 0
processor 32576 3 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port [8086:2591] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90000000-afffffff
Prefetchable memory behind bridge: c0000000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 80000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b0000000-b3ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 80004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=216
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b4000000-b40fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ahci, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller [8086:266a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 18e0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce Go
7800 GTX] [10de:0099] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 2000 [size=128]
[virtual] Expansion ROM at 91000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller [11ab:4362] (rev 19)
Subsystem: CLEVO/KAPOK Computer Marvell 88E8053 Gigabit Ethernet
Controller (Clevo) [1558:04a0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: _sky2
06:02.0 Multimedia controller [0480]: Philips Semiconductors
SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d0)
Subsystem: Animation Technologies Inc. Device [5168:3307]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 181 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at b4006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: saa7134
Kernel modules: saa7134
06:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG
[Calexico2] Network Connection [8086:4223] (rev 05)
Subsystem: Intel Corporation Device [8086:1000]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b4007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel modules: ipw2200
06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus
Controller [104c:8031]
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b4009000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 8c000000-8c3ff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
06:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394
Host Controller [104c:8032] (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 5
Region 0: Memory at b4006800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at b4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
06:04.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated
FlashMedia Controller [104c:8033]
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at b4004000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
Kernel modules: tifm_7xx1
06:04.4 SD Host controller [0805]: Texas Instruments
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
Subsystem: CLEVO/KAPOK Computer Device [1558:0570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b4008800 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at b4008400 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at b4008000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--- End Message ---