Package: linux-2.6 Version: 2.6.32-8 Severity: normal
Hi, Today I tried to mount a share from alfresco via smbfs. With older linux-image versions (I can test it with 2.6.30 for example): mount -t smbfs //alfresco/share ~/alfresco works fine and ls ~/alfresco show me all my files But with this kernel 2.6.32-8: mount -t smbfs //alfresco/share ~/alfresco seems to work fine but ls ~/alfresco doesn't show me any file and I can't access to them I would try with a newer kernel, but kernel-archive.buildserver.net is down, at least this tell our wiki (w.d.o/DebianKernel) I have too a PDC which samba, and its shares are working when I access to them with the two kernels (2.6.32 and 2.6.30). I'm afraid it could be an alfresco issue :(, but like it works with 2.6.30 kernel version, I'm opening this bug. Thank you very much -- Package-specific info: ** Version: Linux version 2.6.32-2-686 (Debian 2.6.32-8) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Thu Feb 11 04:08:42 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-2-686 root=/dev/mapper/delorian-root ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ 3.616063] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 3.643900] PM: Starting manual resume from disk [ 3.643905] PM: Resume from partition 254:1 [ 3.643908] PM: Checking hibernation image. [ 3.644072] PM: Error -22 checking image file [ 3.644076] PM: Resume from disk failed. [ 3.668785] kjournald starting. Commit interval 5 seconds [ 3.668799] EXT3-fs: mounted filesystem with ordered data mode. [ 3.762307] usb 3-1: New USB device found, idVendor=047f, idProduct=c001 [ 3.762314] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.762439] usb 3-1: configuration #1 chosen from 1 choice [ 5.065247] udev: starting version 151 [ 5.375332] ACPI: SSDT 5ffe2b27 00453 (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 5.375765] processor LNXCPU:00: registered as cooling_device0 [ 5.376043] processor LNXCPU:01: registered as cooling_device1 [ 5.378574] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 5.412751] parport_pc 00:07: reported by Plug and Play ACPI [ 5.413107] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 5.493623] ACPI: WMI: Mapper loaded [ 5.664936] intel_rng: Firmware space is locked read-only. If you can't or [ 5.664939] intel_rng: don't want to disable this in firmware setup, and if [ 5.664941] intel_rng: you are certain that your system has a functional [ 5.664942] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 5.818603] usbcore: registered new interface driver hiddev [ 5.822610] input: HID 047f:c001 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3/input/input4 [ 5.822715] generic-usb 0003:047F:C001.0001: input,hidraw0: USB HID v1.00 Device [HID 047f:c001] on usb-0000:00:1d.1-1/input3 [ 5.822744] usbcore: registered new interface driver usbhid [ 5.822748] usbhid: v2.6:USB HID core driver [ 6.149578] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 6.170870] nvidia: module license 'NVIDIA' taints kernel. [ 6.170876] Disabling lock debugging due to kernel taint [ 6.878130] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.878163] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.948782] usbcore: registered new interface driver snd-usb-audio [ 6.967330] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 7.035693] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.035703] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.035927] NVRM: loading NVIDIA UNIX x86 Kernel Module 190.53 Tue Dec 8 18:51:41 PST 2009 [ 9.354537] EXT3 FS on dm-0, internal journal [ 9.449650] loop: module loaded [ 9.480534] smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision 0) [ 9.520621] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 9.520625] vboxdrv: Successfully done. [ 9.520628] vboxdrv: Found 2 processor cores. [ 9.521197] vboxdrv: fAsync=0 offMin=0x915 offMax=0x3480 [ 9.521255] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 9.521258] vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001). [ 10.745840] kjournald starting. Commit interval 5 seconds [ 10.746013] EXT3 FS on sda1, internal journal [ 10.746021] EXT3-fs: mounted filesystem with ordered data mode. [ 10.797273] kjournald starting. Commit interval 5 seconds [ 10.797513] EXT3 FS on dm-5, internal journal [ 10.797519] EXT3-fs: mounted filesystem with ordered data mode. [ 10.826649] kjournald starting. Commit interval 5 seconds [ 10.826878] EXT3 FS on dm-2, internal journal [ 10.826885] EXT3-fs: mounted filesystem with ordered data mode. [ 10.844095] kjournald starting. Commit interval 5 seconds [ 10.844295] EXT3 FS on dm-3, internal journal [ 10.844301] EXT3-fs: mounted filesystem with ordered data mode. [ 10.873563] kjournald starting. Commit interval 5 seconds [ 10.873753] EXT3 FS on dm-4, internal journal [ 10.873760] EXT3-fs: mounted filesystem with ordered data mode. [ 11.501829] EXT4-fs (dm-28): warning: maximal mount count reached, running e2fsck is recommended [ 11.502399] EXT4-fs (dm-28): mounted filesystem with ordered data mode [ 11.627231] EXT4-fs (dm-29): warning: maximal mount count reached, running e2fsck is recommended [ 11.628574] EXT4-fs (dm-29): mounted filesystem with ordered data mode [ 11.833333] Adding 1572856k swap on /dev/mapper/delorian-swap. Priority:-1 extents:1 across:1572856k [ 13.915529] 802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com> [ 13.915534] All bugs added by David S. Miller <da...@redhat.com> [ 14.018121] tg3 0000:3f:00.0: irq 27 for MSI/MSI-X [ 14.064732] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.498621] Bridge firewalling registered [ 14.510622] device vlan192 entered promiscuous mode [ 14.511876] device eth0 entered promiscuous mode [ 14.516576] br-lan: port 1(vlan192) entering forwarding state [ 17.146645] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 17.146650] tg3: eth0: Flow control is off for TX and off for RX. [ 17.146806] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.376316] device vlan99 entered promiscuous mode [ 18.380822] br-gest: port 1(vlan99) entering learning state [ 19.634012] fuse init (API version 7.13) [ 24.712506] vlan192: no IPv6 routers present [ 25.264506] br-lan: no IPv6 routers present [ 27.152009] eth0: no IPv6 routers present [ 28.512014] br-gest: no IPv6 routers present [ 28.992008] vlan99: no IPv6 routers present [ 33.380015] br-gest: port 1(vlan99) entering forwarding state [ 34.824703] lp0: using parport0 (interrupt-driven). [ 35.163576] ppdev: user-space parallel port driver [ 4261.610460] Slow work thread pool: Starting up [ 4261.613915] Slow work thread pool: Ready [ 5051.884072] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 5051.884082] CIFS VFS: Send error in SessSetup = -13 [ 5051.884095] CIFS VFS: cifs_mount failed w/return code = -13 [ 5060.115599] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 5060.115609] CIFS VFS: Send error in SessSetup = -13 [ 5060.115619] CIFS VFS: cifs_mount failed w/return code = -13 [ 5062.611615] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [ 5062.611626] CIFS VFS: Send error in SessSetup = -13 [ 5062.611639] CIFS VFS: cifs_mount failed w/return code = -13 ** Model information not available ** Loaded modules: Module Size Used by nls_utf8 908 0 cifs 219974 0 ppdev 4058 0 lp 5570 0 vboxnetadp 5154 0 acpi_cpufreq 4907 0 cpufreq_stats 1940 0 cpufreq_powersave 602 0 cpufreq_conservative 4018 0 cpufreq_userspace 1444 0 fuse 43554 1 bridge 32851 0 8021q 13950 0 garp 4066 1 8021q stp 996 2 bridge,garp ext4 254301 2 jbd2 55835 1 ext4 crc16 1027 1 ext4 vboxnetflt 10202 0 vboxdrv 114413 2 vboxnetadp,vboxnetflt smsc47b397 2279 0 loop 9721 0 snd_hda_codec_realtek 162919 1 snd_usb_audio 50418 2 snd_usb_lib 10957 1 snd_usb_audio snd_hda_intel 16211 0 snd_seq_midi 3576 0 snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi_event 3684 1 snd_seq_midi snd_rawmidi 12505 2 snd_usb_lib,snd_seq_midi snd_pcm 47362 4 snd_usb_audio,snd_hda_intel,snd_hda_codec snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec nvidia 8783671 28 usbhid 27756 0 snd_seq 35327 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 3 snd_pcm,snd_seq rng_core 2178 0 snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq hid 50593 1 usbhid i2c_core 12612 1 nvidia snd 34327 12 snd_hda_codec_realtek,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_rawmidi,snd_pcm,snd_hwdep,snd_seq,snd_timer,snd_seq_device wmi 3575 0 psmouse 44381 0 soundcore 3450 1 snd snd_page_alloc 4977 2 snd_hda_intel,snd_pcm parport_pc 15799 1 serio_raw 2916 0 parport 22554 3 ppdev,lp,parport_pc evdev 5609 13 pcspkr 1207 0 processor 25811 1 acpi_cpufreq ext3 93828 6 jbd 31965 1 ext3 mbcache 3762 2 ext4,ext3 dm_mod 45878 73 sd_mod 25717 3 crc_t10dif 1012 1 sd_mod ide_cd_mod 21044 0 cdrom 26487 1 ide_cd_mod ata_generic 2015 0 ide_pci_generic 1924 0 uhci_hcd 15977 0 ehci_hcd 27346 0 tg3 88053 0 intel_agp 20165 0 ata_piix 16513 2 piix 3564 0 floppy 40923 0 agpgart 19516 2 nvidia,intel_agp libphy 11238 1 tg3 libata 114180 2 ata_generic,ata_piix button 3598 0 scsi_mod 101069 2 sd_mod,libata ide_core 63850 3 ide_cd_mod,ide_pci_generic,piix usbcore 97930 6 snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ehci_hcd nls_base 4541 3 nls_utf8,cifs,usbcore thermal 9206 0 fan 2586 0 thermal_sys 9378 3 processor,thermal,fan ** Network interface configuration: auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto vlan192 iface vlan192 inet manual vlan-raw-device eth0 auto vlan99 iface vlan99 inet manual vlan-raw-device eth0 auto br-lan iface br-lan inet static address 192.168.101.120 netmask 255.255.0.0 bridge_ports vlan192 bridge_stp off bridge_fd 0 gateway 192.168.100.1 auto br-gest iface br-gest inet static address 10.4.0.120 netmask 255.255.255.0 bridge_ports vlan99 bridge_stp off bridge_maxwait 0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe20:b5ad/64 scope link valid_lft forever preferred_lft forever 3: vlan...@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe20:b5ad/64 scope link valid_lft forever preferred_lft forever 4: vla...@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff inet6 fe80::217:a4ff:fe20:b5ad/64 scope link valid_lft forever preferred_lft forever 5: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff inet 192.168.101.120/16 brd 192.168.255.255 scope global br-lan inet6 fe80::217:a4ff:fe20:b5ad/64 scope link valid_lft forever preferred_lft forever 6: br-gest: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff inet 10.4.0.120/24 brd 10.4.0.255 scope global br-gest inet6 fe80::217:a4ff:fe20:b5ad/64 scope link valid_lft forever preferred_lft forever 7: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1160 20 0 0 0 0 0 0 1160 20 0 0 0 0 0 0 eth0:13319958 96517 0 0 0 0 0 30879 991519 5007 0 0 0 0 0 0 vlan192:10691567 92197 0 0 0 0 0 26791 940298 4923 0 8 0 0 0 0 vlan99: 204831 1427 0 0 0 0 0 1195 8831 80 0 0 0 0 0 0 br-lan:10511388 89432 0 0 0 0 0 85054 940438 4925 0 0 0 0 0 0 br-gest: 204411 1422 0 0 0 0 0 1403 8831 80 0 0 0 0 0 0 vboxnet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 50644 total packets received 1 with invalid addresses 0 forwarded 0 incoming packets discarded 36212 incoming packets delivered 4743 requests sent out 8 dropped because of missing route Icmp: 3 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo requests: 3 3 ICMP messages sent 0 ICMP messages failed ICMP output histogram: echo replies: 3 IcmpMsg: InType8: 3 OutType0: 3 Tcp: 186 active connections openings 5 passive connection openings 7 failed connection attempts 13 connection resets received 6 connections established 3196 segments received 3579 segments send out 3 segments retransmited 0 bad segments received. 64 resets sent Udp: 25466 packets received 0 packets to unknown port received. 0 packet receive errors 1156 packets sent UdpLite: TcpExt: 1 resets received for embryonic SYN_RECV sockets 39 TCP sockets finished time wait in fast timer 389 delayed acks sent Quick ack mode was activated 2 times 279 packets directly queued to recvmsg prequeue. 1649 packet headers predicted 398 acknowledgments not containing data payload received 683 predicted acknowledgments 3 congestion windows recovered without slow start after partial ack 3 other TCP timeouts 2 DSACKs sent for old packets 3 DSACKs received 9 connections reset due to unexpected data 11 connections reset due to early user close IpExt: InMcastPkts: 8577 OutMcastPkts: 194 InBcastPkts: 23293 OutBcastPkts: 119 InOctets: 8342549 OutOctets: 851165 InMcastOctets: 1671003 OutMcastOctets: 31637 InBcastOctets: 2912185 OutBcastOctets: 15552 *** Device features: br-gest: 0x1800 br-lan: 0x1800 eth0: 0x109a3 lo: 0x13865 vboxnet0: 0x0 vlan192: 0x0 vlan99: 0x0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: e2000000-e51fffff Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 60000000-601fffff Prefetchable memory behind bridge: 0000000060200000-00000000603fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: e0200000-e04fffff Prefetchable memory behind bridge: 0000000060400000-00000000605fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 2000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 2020 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 2040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at 2060 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at e0504000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 20a0 [size=16] Kernel driver in use: PIIX_IDE 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 20d0 [size=8] Region 1: I/O ports at 20e8 [size=4] Region 2: I/O ports at 20d8 [size=8] Region 3: I/O ports at 20ec [size=4] Region 4: I/O ports at 20b0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400 GT] [10de:0641] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:82be] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at 1000 [size=128] [virtual] Expansion ROM at e0000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 003 Device 002: ID 047f:c001 Plantronics, Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-2-686 (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-2-686 depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-2-686 recommends: ii firmware-linux-free 2.6.32-8 Binary firmware for various driver ii libc6-i686 2.10.2-5 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-2-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-2-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: linux-image-2.6.32-2-686/prerm/would-invalidate-boot-loader-2.6.32-2-686: true linux-image-2.6.32-2-686/postinst/bootloader-test-error-2.6.32-2-686: * linux-image-2.6.32-2-686/postinst/missing-firmware-2.6.32-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-2-686/postinst/depmod-error-initrd-2.6.32-2-686: false linux-image-2.6.32-2-686/postinst/bootloader-error-2.6.32-2-686: linux-image-2.6.32-2-686/prerm/removing-running-kernel-2.6.32-2-686: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100225152451.4214.37078.report...@pepinux.red.isotrol.com