Package: linux-2.6 Version: 2.6.32-8 Severity: normal While I am currently running 2.6.33-2, I also have this problem with 2.6.32-8. The issue is that when I switch from Xorg to a virtual console, wait some seconds and then switch back to Xorg, for about 0.5 seconds I see what was on the screen before I switched away from Xorg, then the screen flashes and gets updated by Xorg. Usually when it gets updated the screensaver has kicked in. I would expect that when switching back to Xorg I'd see the screensaver instead of a flash of my desktop. I also wonder if this could be a minor information disclosure security issue. As you can see below, I have an i915-based Intel GPU, which defaults to using KMS. I didn't have this issue before i915 was switched to using KMS by default.
-- Package-specific info: ** Version: Linux version 2.6.33-2-amd64 (Debian 2.6.33-1~experimental.2) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Sun Feb 28 18:30:42 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.33-2-amd64 root=/dev/mapper/chianamo-root ro quiet loglevel=0 ** Not tainted ** Kernel log: [ 35.341989] udev: starting version 151 [ 36.325795] ACPI: WMI: Mapper loaded [ 36.341383] input: Dell WMI hotkeys as /devices/virtual/input/input9 [ 36.540780] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 36.577084] ACPI: SSDT 000000005f6d4134 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 36.577555] ACPI: SSDT 000000005f6d3ee9 001C6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 36.578516] ACPI: SSDT 000000005f6d4378 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 36.578929] ACPI: SSDT 000000005f6d40af 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 36.620815] ACPI: Battery Slot [BAT0] (battery present) [ 36.626575] ACPI: AC Adapter [AC] (on-line) [ 37.225503] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000 [ 37.261157] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 37.379467] cfg80211: Using static regulatory domain info [ 37.379470] cfg80211: Regulatory domain: 00 [ 37.379473] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 37.379476] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 37.379480] (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 37.379483] (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 37.379486] (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 37.379489] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 37.379900] cfg80211: Calling CRDA to update world regulatory domain [ 37.380702] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 37.381747] leds_ss4200: no LED devices found [ 38.165282] intel_rng: FWH not detected [ 39.058204] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-2-amd64-ks [ 39.058208] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 39.058332] iwl3945 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 39.058348] iwl3945 0000:0b:00.0: setting latency timer to 64 [ 39.112192] iwl3945 0000:0b:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels [ 39.112197] iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 39.112314] alloc irq_desc for 26 on node -1 [ 39.112317] alloc kstat_irqs on node -1 [ 39.112353] iwl3945 0000:0b:00.0: irq 26 for MSI/MSI-X [ 39.612674] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 39.751273] Bluetooth: Core ver 2.15 [ 39.751343] NET: Registered protocol family 31 [ 39.751345] Bluetooth: HCI device and connection manager initialized [ 39.751349] Bluetooth: HCI socket layer initialized [ 40.332578] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 40.332718] usbcore: registered new interface driver btusb [ 40.333302] usbcore: registered new interface driver cdc_ether [ 40.637584] rndis_host 1-3:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [ 40.654363] eth1: register 'rndis_host' at usb-0000:00:1d.7-3, RNDIS device, 80:00:60:0f:e8:00 [ 40.654400] usbcore: registered new interface driver rndis_host [ 40.840238] usbcore: registered new interface driver rndis_wlan [ 41.239498] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 41.239585] alloc irq_desc for 27 on node -1 [ 41.239588] alloc kstat_irqs on node -1 [ 41.239604] HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X [ 41.239644] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 41.696494] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 41.696606] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 42.761426] cfg80211: World regulatory domain updated: [ 42.761430] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 42.761434] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.761437] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.761440] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.761444] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.761447] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 44.295953] EXT3-fs (dm-1): using internal journal [ 44.750644] loop: module loaded [ 46.497344] Adding 4607992k swap on /dev/mapper/chianamo-swap. Priority:-1 extents:1 across:4607992k [ 55.063348] fuse init (API version 7.13) [ 56.884823] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 85.467832] Bluetooth: L2CAP ver 2.14 [ 85.467838] Bluetooth: L2CAP socket layer initialized [ 85.560643] Bluetooth: RFCOMM TTY layer initialized [ 85.560650] Bluetooth: RFCOMM socket layer initialized [ 85.560655] Bluetooth: RFCOMM ver 1.11 [ 85.668888] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 85.668895] Bluetooth: BNEP filters: protocol multicast [ 85.937013] Bridge firewalling registered [ 86.099992] Bluetooth: SCO (Voice Link) ver 0.6 [ 86.099998] Bluetooth: SCO socket layer initialized [ 91.414318] iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 91.742964] iwl3945 0000:0b:00.0: loaded firmware version 15.32.2.9 [ 91.822221] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 91.917696] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 94.805250] b44: eth0: Link is up at 100 Mbps, full duplex. [ 94.805258] b44: eth0: Flow control is off for TX and off for RX. [ 94.805977] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 101.961073] eth1: no IPv6 routers present ** Model information sys_vendor: Dell Inc. product_name: MM061 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A14 board_vendor: Dell Inc. board_name: 0KD882 board_version: ** Loaded modules: Module Size Used by sco 7257 2 bridge 39813 0 stp 1440 1 bridge bnep 9722 2 rfcomm 29762 4 l2cap 25274 16 bnep,rfcomm crc16 1319 1 l2cap acpi_cpufreq 5787 0 cpufreq_conservative 7910 0 cpufreq_stats 2659 0 cpufreq_userspace 2024 0 cpufreq_powersave 902 0 uinput 6687 1 fuse 50478 3 ext2 53966 1 loop 11902 0 snd_hda_codec_idt 43268 1 snd_hda_intel 20179 5 snd_hda_codec 57782 2 snd_hda_codec_idt,snd_hda_intel rndis_wlan 18502 0 snd_hwdep 5428 1 snd_hda_codec rndis_host 5235 1 rndis_wlan btusb 9785 2 cdc_ether 3642 1 rndis_host snd_pcm_oss 32790 0 usbnet 13073 3 rndis_wlan,rndis_host,cdc_ether snd_mixer_oss 12654 1 snd_pcm_oss snd_pcm 61254 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4432 0 bluetooth 42103 9 sco,bnep,rfcomm,l2cap,btusb arc4 1274 2 snd_rawmidi 15810 1 snd_seq_midi ecb 1841 2 snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 43279 2 snd_seq_midi,snd_seq_midi_event snd_timer 15749 2 snd_pcm,snd_seq iwl3945 52987 0 snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq iwlcore 81927 1 iwl3945 snd 47090 20 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device rng_core 3158 0 soundcore 4822 1 snd mac80211 140504 2 iwl3945,iwlcore snd_page_alloc 6313 2 snd_hda_intel,snd_pcm joydev 8546 0 i2c_i801 7814 0 cfg80211 105832 4 rndis_wlan,iwl3945,iwlcore,mac80211 dell_laptop 2065 0 rfkill 13164 4 bluetooth,cfg80211,dell_laptop tpm_tis 7336 0 ac 2192 0 tpm 9933 1 tpm_tis psmouse 45587 0 battery 4998 0 processor 29489 3 acpi_cpufreq dcdbas 5080 1 dell_laptop tpm_bios 4521 1 tpm dell_wmi 2587 0 wmi 5461 1 dell_wmi serio_raw 3960 0 evdev 7384 29 ext3 107181 1 jbd 37789 1 ext3 mbcache 5050 2 ext2,ext3 sha256_generic 8692 2 cryptd 5504 0 aes_x86_64 7340 4 aes_generic 25714 1 aes_x86_64 cbc 2539 1 dm_crypt 10744 1 dm_mod 55446 9 dm_crypt sg 18959 0 usbhid 33411 0 hid 63497 1 usbhid sr_mod 12602 0 cdrom 29358 1 sr_mod sd_mod 30459 3 crc_t10dif 1276 1 sd_mod usb_storage 38425 2 ata_generic 3015 0 b44 21732 0 ssb 38363 1 b44 i915 249816 2 drm_kms_helper 20097 1 i915 sdhci_pci 6218 0 sdhci 14030 1 sdhci_pci pcmcia 17957 1 ssb uhci_hcd 18585 0 ata_piix 20477 0 ehci_hcd 31298 0 drm 143558 3 i915,drm_kms_helper i2c_algo_bit 4225 1 i915 i2c_core 15385 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit mmc_core 46156 2 ssb,sdhci ricoh_mmc 3101 0 led_class 2417 1 sdhci pcmcia_core 24631 1 pcmcia mii 3210 2 usbnet,b44 intel_agp 25641 1 libata 133993 2 ata_generic,ata_piix scsi_mod 123365 5 sg,sr_mod,sd_mod,usb_storage,libata usbcore 126389 10 rndis_wlan,rndis_host,btusb,cdc_ether,usbnet,usbhid,usb_storage,uhci_hcd,ehci_hcd nls_base 6377 1 usbcore button 4634 1 i915 video 18001 1 i915 output 1692 1 video thermal 11889 0 fan 3266 0 thermal_sys 11990 4 processor,video,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: efd00000-efdfffff Prefetchable memory behind bridge: 0000000060000000-00000000601fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: efa00000-efcfffff Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: ef900000-ef9fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master]) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Dell Device [1028:01bd] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 10c0 [size=32] Kernel driver in use: i801_smbus 03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Dell Inspiron 6400 [1028:01af] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 3 Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> 03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) (prog-if 01) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 18 Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 0a) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 11 Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ricoh-mmc 03:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 05) Subsystem: Dell Device [1028:01bd] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 11 Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 03:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff) !!! Unknown header type 7f 0b:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1022] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at efdff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 005: ID 0a5c:4503 Broadcom Corp. Bus 005 Device 004: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass) Bus 005 Device 003: ID 413c:8126 Dell Computer Corp. Wireless 355 Bluetooth Bus 005 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (700, 'testing'), (600, 'unstable'), (550, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.33-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.33-2-amd64 depends on: ii debconf [debconf 1.5.28 Debian configuration management sy ii initramfs-tools 0.93.4 tools for generating an initramfs ii linux-base 2.6.33-1~experimental.2 Linux image base package ii module-init-tool 3.12~pre1-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.33-2-amd64 recommends: ii firmware-linux-free 2.6.32-5 Binary firmware for various driver Versions of packages linux-image-2.6.33-2-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.33 <none> (no description available) Versions of packages linux-image-2.6.33-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) ii firmware-iwlwifi 0.22 Binary firmware for Intel Wireless pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.33-2-amd64/prerm/removing-running-kernel-2.6.33-2-amd64: true linux-image-2.6.33-2-amd64/postinst/depmod-error-initrd-2.6.33-2-amd64: false linux-image-2.6.33-2-amd64/postinst/bootloader-error-2.6.33-2-amd64: linux-image-2.6.33-2-amd64/prerm/would-invalidate-boot-loader-2.6.33-2-amd64: true linux-image-2.6.33-2-amd64/postinst/bootloader-test-error-2.6.33-2-amd64: linux-image-2.6.33-2-amd64/postinst/missing-firmware-2.6.33-2-amd64: -- bye, pabs http://wiki.debian.org/PaulWise
signature.asc
Description: This is a digitally signed message part