Twas brillig at 14:41:10 07.03.2010 UTC+00 when t...@cyrius.com did gyre and gimble:
>> Just tested it. Works fine here (mDNS resolves without promisc mode >> on interface), thanks. MM> Good to hear! That patch also included some debugging output. Can MM> you please send the output from "dmesg"? Attached. [looking at dmesg: wow, looks like I just found wireless card I lost some time ago - it's mini-PCI slot in NAS :] -- http://fossarchy.blogspot.com/
pgpVUt7LrooGF.pgp
Description: PGP signature
15.010000] pci 0000:00:04.0: reg 20 io port: [0x90000800-0x9000081f] [ 15.010000] pci 0000:00:04.0: supports D1 D2 [ 15.010000] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot [ 15.010000] pci 0000:00:04.0: PME# disabled [ 15.010000] pci 0000:00:04.1: reg 20 io port: [0x90000820-0x9000083f] [ 15.010000] pci 0000:00:04.1: supports D1 D2 [ 15.010000] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot [ 15.010000] pci 0000:00:04.1: PME# disabled [ 15.010000] pci 0000:00:04.2: reg 10 32bit mmio: [0x800a1400-0x800a14ff] [ 15.010000] pci 0000:00:04.2: supports D1 D2 [ 15.010000] pci 0000:00:04.2: PME# supported from D0 D1 D2 D3hot [ 15.010000] pci 0000:00:04.2: PME# disabled [ 15.010000] pci 0000:00:05.0: reg 10 32bit mmio: [0x800a0000-0x800a0fff] [ 15.010000] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 15.010000] pci 0000:00:05.0: PME# disabled [ 15.010000] PCI: bus0: Fast back to back transfers disabled [ 15.010000] bio: create slab <bio-0> at 0 [ 15.010000] vgaarb: loaded [ 15.020000] NET: Registered protocol family 2 [ 15.020000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 15.030000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 15.030000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 15.030000] TCP: Hash tables configured (established 16384 bind 16384) [ 15.030000] TCP reno registered [ 15.030000] NET: Registered protocol family 1 [ 15.030000] Unpacking initramfs... [ 17.130000] Freeing initrd memory: 6612K [ 17.130000] NetWinder Floating Point Emulator V0.97 (double precision) [ 17.130000] audit: initializing netlink socket (disabled) [ 17.130000] type=2000 audit(17.130:1): initialized [ 17.140000] VFS: Disk quotas dquot_6.5.2 [ 17.140000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.140000] msgmni has been set to 1007 [ 17.140000] alg: No test for stdrng (krng) [ 17.150000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 17.150000] io scheduler noop registered [ 17.150000] io scheduler anticipatory registered [ 17.150000] io scheduler deadline registered [ 17.150000] io scheduler cfq registered (default) [ 17.160000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 17.160000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A [ 17.160000] physmap platform flash device: 01000000 at f0000000 [ 17.160000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank [ 17.160000] Intel/Sharp Extended Query Table at 0x0031 [ 17.160000] Intel/Sharp Extended Query Table at 0x0031 [ 17.160000] Using buffer write method [ 17.160000] cfi_cmdset_0001: Erase suspend on write enabled [ 17.160000] erase region 0: offset=0x0,size=0x20000,blocks=128 [ 17.160000] Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000 [ 17.480000] 6 RedBoot partitions found on MTD device physmap-flash.0 [ 17.480000] Creating 6 MTD partitions on "physmap-flash.0": [ 17.480000] 0x000000000000-0x000000040000 : "RedBoot" [ 17.480000] 0x000000040000-0x000000d40000 : "ramdisk" [ 17.480000] 0x000000d40000-0x000000ea0000 : "kernel" [ 17.480000] 0x000000ea0000-0x000000fc0000 : "user" [ 17.480000] 0x000000fc0000-0x000000fc1000 : "RedBoot config" [ 17.480000] mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only [ 17.480000] 0x000000fe0000-0x000001000000 : "FIS directory" [ 17.490000] mice: PS/2 mouse device common for all mice [ 17.490000] i2c /dev entries driver [ 17.490000] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6 [ 17.490000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 [ 17.500000] pca9532 0-0060: setting platform data [ 17.500000] Registered led device: n2100:red:satafail0 [ 17.500000] Registered led device: n2100:red:satafail1 [ 17.500000] Registered led device: n2100:blue:usb [ 17.500000] Registered led device: n2100:red:usb [ 17.500000] Registered led device: n2100:orange:system [ 17.500000] Registered led device: n2100:red:system [ 17.500000] input: N2100 beeper as /devices/virtual/input/input0 [ 17.520000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr ) [ 17.540000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr ) [ 17.540000] TCP cubic registered [ 17.540000] NET: Registered protocol family 17 [ 17.540000] XScale DSP coprocessor detected. [ 17.540000] registered taskstats version 1 [ 17.540000] rtc-rs5c372 0-0032: setting system clock to 2010-03-07 14:01:03 UTC (1267970463) [ 17.540000] Freeing init memory: 112K [ 20.650000] SCSI subsystem initialized [ 21.290000] usbcore: registered new interface driver usbfs [ 21.290000] usbcore: registered new interface driver hub [ 21.290000] usbcore: registered new device driver usb [ 21.430000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 21.430000] r8169 0000:00:01.0: no PCI Express capability [ 21.430000] eth0: RTL8169sb/8110sb at 0xe08d2200, 00:14:fd:30:1a:56, XID 10000000 IRQ 27 [ 21.430000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 21.430000] r8169 0000:00:02.0: no PCI Express capability [ 21.430000] eth1: RTL8169sb/8110sb at 0xe08d6300, 00:14:fd:30:1a:57, XID 10000000 IRQ 30 [ 21.950000] uhci_hcd: USB Universal Host Controller Interface driver [ 21.950000] uhci_hcd 0000:00:04.0: UHCI Host Controller [ 21.950000] uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 21.950000] uhci_hcd 0000:00:04.0: irq 28, io base 0x90000800 [ 21.950000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.950000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.950000] usb usb1: Product: UHCI Host Controller [ 21.950000] usb usb1: Manufacturer: Linux 2.6.32-trunk-iop32x uhci_hcd [ 21.950000] usb usb1: SerialNumber: 0000:00:04.0 [ 21.950000] usb usb1: configuration #1 chosen from 1 choice [ 21.950000] hub 1-0:1.0: USB hub found [ 21.950000] hub 1-0:1.0: 2 ports detected [ 21.950000] uhci_hcd 0000:00:04.1: UHCI Host Controller [ 21.950000] uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 21.950000] uhci_hcd 0000:00:04.1: irq 27, io base 0x90000820 [ 21.950000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.950000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.950000] usb usb2: Product: UHCI Host Controller [ 21.950000] usb usb2: Manufacturer: Linux 2.6.32-trunk-iop32x uhci_hcd [ 21.950000] usb usb2: SerialNumber: 0000:00:04.1 [ 21.950000] usb usb2: configuration #1 chosen from 1 choice [ 21.950000] hub 2-0:1.0: USB hub found [ 21.950000] hub 2-0:1.0: 2 ports detected [ 22.020000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.020000] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 22.020000] ehci_hcd 0000:00:04.2: EHCI Host Controller [ 22.020000] ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 3 [ 22.020000] ehci_hcd 0000:00:04.2: Enabling legacy PCI PM [ 22.020000] ehci_hcd 0000:00:04.2: irq 29, io mem 0x800a1400 [ 22.040000] ehci_hcd 0000:00:04.2: USB 2.0 started, EHCI 1.00 [ 22.040000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 22.040000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.040000] usb usb3: Product: EHCI Host Controller [ 22.040000] usb usb3: Manufacturer: Linux 2.6.32-trunk-iop32x ehci_hcd [ 22.040000] usb usb3: SerialNumber: 0000:00:04.2 [ 22.040000] usb usb3: configuration #1 chosen from 1 choice [ 22.040000] hub 3-0:1.0: USB hub found [ 22.040000] hub 3-0:1.0: 4 ports detected [ 22.370000] libata version 3.00 loaded. [ 22.430000] sata_sil 0000:00:03.0: version 2.4 [ 22.430000] scsi0 : sata_sil [ 22.440000] scsi1 : sata_sil [ 22.440000] ata1: SATA max UDMA/100 mmio m...@0x800a1000 tf 0x800a1080 irq 29 [ 22.440000] ata2: SATA max UDMA/100 mmio m...@0x800a1000 tf 0x800a10c0 irq 29 [ 22.810000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 22.850000] ata1.00: ATA-8: WDC WD5000AAKS-00C8A0, 12.01C02, max UDMA/133 [ 22.850000] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 22.870000] ata1.00: configured for UDMA/100 [ 22.870000] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 23.220000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 23.240000] ata2.00: ATA-8: WDC WD7500AACS-65D6B0, 01.01A01, max UDMA/133 [ 23.240000] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 23.260000] ata2.00: configured for UDMA/100 [ 23.260000] scsi 1:0:0:0: Direct-Access ATA WDC WD7500AACS-6 01.0 PQ: 0 ANSI: 5 [ 23.550000] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 23.550000] sd 0:0:0:0: [sda] Write Protect is off [ 23.550000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.550000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.550000] sda: [ 23.550000] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 23.550000] sd 1:0:0:0: [sdb] Write Protect is off [ 23.550000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.550000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.560000] sda1 [ 23.560000] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.580000] sdb: sdb1 [ 24.180000] sd 1:0:0:0: [sdb] Attached SCSI disk [ 25.100000] device-mapper: uevent: version 1.0.3 [ 25.120000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 27.230000] EXT3-fs: INFO: recovery required on readonly filesystem. [ 27.230000] EXT3-fs: write access will be enabled during recovery. [ 33.360000] kjournald starting. Commit interval 5 seconds [ 33.360000] EXT3-fs: dm-0: orphan cleanup on readonly fs [ 33.370000] ext3_orphan_cleanup: deleting unreferenced inode 202689 [ 33.390000] ext3_orphan_cleanup: deleting unreferenced inode 245768 [ 33.390000] ext3_orphan_cleanup: deleting unreferenced inode 229778 [ 33.390000] ext3_orphan_cleanup: deleting unreferenced inode 164107 [ 33.400000] ext3_orphan_cleanup: deleting unreferenced inode 164108 [ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164115 [ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164097 [ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164104 [ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164109 [ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164105 [ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164106 [ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164103 [ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164101 [ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164098 [ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164100 [ 33.450000] ext3_orphan_cleanup: deleting unreferenced inode 196633 [ 33.460000] ext3_orphan_cleanup: deleting unreferenced inode 197706 [ 33.470000] ext3_orphan_cleanup: deleting unreferenced inode 199486 [ 33.470000] ext3_orphan_cleanup: deleting unreferenced inode 199476 [ 33.480000] ext3_orphan_cleanup: deleting unreferenced inode 199474 [ 33.490000] ext3_orphan_cleanup: deleting unreferenced inode 199472 [ 33.500000] ext3_orphan_cleanup: deleting unreferenced inode 197057 [ 33.510000] EXT3-fs: dm-0: 22 orphan inodes deleted [ 33.510000] EXT3-fs: recovery complete. [ 33.520000] EXT3-fs: mounted filesystem with ordered data mode. [ 35.960000] udevd version 125 started [ 40.550000] lib80211: common routines for IEEE802.11 drivers [ 40.550000] lib80211_crypt: registered algorithm 'NULL' [ 40.640000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 40.640000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com> [ 40.830000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 40.830000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 40.840000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 40.840000] ipw2200 0000:00:05.0: firmware: requesting ipw2200-bss.fw [ 41.220000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 41.230000] udev: renamed network interface eth2 to eth3 [ 42.690000] EXT3 FS on dm-0, internal journal [ 44.270000] loop: module loaded [ 45.920000] rtl_set_rx_mode: mc_filter = { 0x00000000, 0x00000000 } [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] r8169: eth0: link up [ 45.920000] rtl_set_rx_mode: mc_filter = { 0x00000000, 0x00000000 } [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 } [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000080000000 [ 45.920000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 } [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000080000000 [ 45.920000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 } [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.920000] rtl_set_rx_mode: MAR = 0x0000000080000000 [ 45.980000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 } [ 45.980000] rtl_set_rx_mode: MAR = 0x0000000000000000 [ 45.980000] rtl_set_rx_mode: MAR = 0x0000000080000000 [ 45.980000] device eth0 entered promiscuous mode [ 45.980000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 45.980000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 45.980000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 46.000000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 46.000000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 46.000000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 46.000000] r8169: eth0: link up [ 47.410000] NET: Registered protocol family 10 [ 47.410000] lo: Disabled Privacy Extensions [ 47.410000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 47.410000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 49.140000] JFS: nTxBlock = 4032, nTxLock = 32261 [ 49.380000] Adding 2097144k swap on /dev/mapper/homenas-swap. Priority:-1 extents:1 across:2097144k [ 53.510000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 53.510000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 57.760000] eth0: no IPv6 routers present [ 424.350000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff } [ 424.350000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 424.350000] rtl_set_rx_mode: MAR = 0xffffffffffffffff [ 424.350000] device eth0 left promiscuous mode [ 424.350000] rtl_set_rx_mode: mc_filter = { 0x80088000, 0x40004000 } [ 424.350000] rtl_set_rx_mode: MAR = 0x4000400040004000 [ 424.350000] rtl_set_rx_mode: MAR = 0x4000400080088000