Package: linux-2.6 Version: 2.6.32-15~bpo50+1 Severity: important This card worked with the original prism54 driver. The p54pci driver causes problems. I have tried different versions of the firmware (see the kernel log below) with the same error message: 'phyX: device does not respond!'
As advised @ http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497873 I am filing a new bug against 2.6.32. Is there any workaround, except for enabling PRISM54? -- Package-specific info: ** Version: Linux version 2.6.32-bpo.5-amd64 (Debian 2.6.32-15~bpo50+1) (norb...@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Jun 11 08:42:31 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-bpo.5-amd64 root=/dev/mapper/vg1-lvroot ro ** Not tainted ** Kernel log: [ 14.544299] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 14.544355] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.544408] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.544456] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.544514] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 14.544566] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 14.544617] cfg80211: Calling CRDA for country: US [ 14.582886] parport_pc 00:08: reported by Plug and Play ACPI [ 14.582973] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 14.714351] alloc irq_desc for 20 on node -1 [ 14.714354] alloc kstat_irqs on node -1 [ 14.714361] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 14.714460] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 15.094039] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 15.096509] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 15.537927] p54pci 0000:03:00.0: Cannot find firmware (isl3886pci) [ 15.537982] p54pci 0000:03:00.0: firmware: requesting isl3886 [ 15.541913] p54pci 0000:03:00.0: PCI INT A disabled [ 15.541972] p54pci: probe of 0000:03:00.0 failed with error -2 [ 17.040407] EXT3 FS on dm-1, internal journal [ 17.712759] loop: module loaded [ 19.214173] kjournald starting. Commit interval 5 seconds [ 19.244415] EXT3 FS on md0, internal journal [ 19.244483] EXT3-fs: mounted filesystem with ordered data mode. [ 19.604744] kjournald starting. Commit interval 5 seconds [ 19.644375] EXT3 FS on dm-3, internal journal [ 19.644444] EXT3-fs: mounted filesystem with ordered data mode. [ 20.779403] tun: Universal TUN/TAP device driver, 1.6 [ 20.779472] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 20.841492] Bridge firewalling registered [ 20.845808] device tap10 entered promiscuous mode [ 20.852680] device tap11 entered promiscuous mode [ 20.855180] device eth0 entered promiscuous mode [ 20.856311] alloc irq_desc for 26 on node -1 [ 20.856314] alloc kstat_irqs on node -1 [ 20.856327] atl1c 0000:02:00.0: irq 26 for MSI/MSI-X [ 20.856422] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex> [ 20.858874] br0: port 3(eth0) entering learning state [ 20.858921] br0: port 2(tap11) entering learning state [ 20.858964] br0: port 1(tap10) entering learning state [ 30.860011] br0: no IPv6 routers present [ 30.864090] eth0: no IPv6 routers present [ 30.992017] tap10: no IPv6 routers present [ 31.644019] tap11: no IPv6 routers present [ 35.856507] br0: port 3(eth0) entering forwarding state [ 35.856558] br0: port 2(tap11) entering forwarding state [ 35.856605] br0: port 1(tap10) entering forwarding state [ 112.560011] tap0: no IPv6 routers present [ 4094.553141] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4094.553254] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 4094.556691] p54pci 0000:03:00.0: Cannot find firmware (isl3886pci) [ 4094.556731] p54pci 0000:03:00.0: firmware: requesting isl3886 [ 4094.560454] p54pci 0000:03:00.0: PCI INT A disabled [ 4094.560496] p54pci: probe of 0000:03:00.0 failed with error -2 [ 4382.629133] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4382.629214] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 4382.643339] phy2: p54 detected a LM86 firmware [ 4382.643367] p54: rx_mtu reduced from 3240 to 2376 [ 4382.643392] phy2: FW rev 2.17.2.0 - Softmac protocol 7.6 [ 4382.643418] phy2: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 4383.752033] phy2: device does not respond! [ 4383.752125] p54pci 0000:03:00.0: PCI INT A disabled [ 4383.752161] p54pci: probe of 0000:03:00.0 failed with error -16 [ 4488.917054] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4488.917135] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 4488.931262] phy3: p54 detected a LM86 firmware [ 4488.931290] p54: rx_mtu reduced from 3240 to 2376 [ 4488.931316] phy3: FW rev 2.13.22.0 - Softmac protocol 5.9 [ 4488.931342] phy3: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 4490.036012] phy3: device does not respond! [ 4490.036111] p54pci 0000:03:00.0: PCI INT A disabled [ 4490.036149] p54pci: probe of 0000:03:00.0 failed with error -16 [ 4842.733163] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4842.733243] p54pci 0000:03:00.0: firmware: requesting isl3886pci [ 4842.747415] phy4: p54 detected a LM86 firmware [ 4842.747443] p54: rx_mtu reduced from 3240 to 2376 [ 4842.747468] phy4: FW rev 2.13.12.0 - Softmac protocol 5.9 [ 4842.747495] phy4: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 4843.852508] phy4: device does not respond! [ 4843.852594] p54pci 0000:03:00.0: PCI INT A disabled [ 4843.852632] p54pci: probe of 0000:03:00.0 failed with error -16 [518222.680053] usb 3-1: USB disconnect, address 2 [549189.957065] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [549189.957148] p54pci 0000:03:00.0: firmware: requesting isl3886pci [549189.971151] phy5: p54 detected a LM86 firmware [549189.971180] p54: rx_mtu reduced from 3240 to 2376 [549189.971205] phy5: FW rev 2.13.12.0 - Softmac protocol 5.9 [549189.971232] phy5: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [549191.076012] phy5: device does not respond! [549191.076111] p54pci 0000:03:00.0: PCI INT A disabled [549191.076149] p54pci: probe of 0000:03:00.0 failed with error -16 [558584.977056] p54pci 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [558584.977137] p54pci 0000:03:00.0: firmware: requesting isl3886pci [558584.991180] phy6: p54 detected a LM86 firmware [558584.991208] p54: rx_mtu reduced from 3240 to 2376 [558584.991234] phy6: FW rev 2.17.2.0 - Softmac protocol 7.6 [558584.991260] phy6: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [558586.096014] phy6: device does not respond! [558586.096101] p54pci 0000:03:00.0: PCI INT A disabled [558586.096138] p54pci: probe of 0000:03:00.0 failed with error -16 ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: G31M-ES2L product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: FH board_vendor: Gigabyte Technology Co., Ltd. board_name: G31M-ES2L board_version: x.x ** Loaded modules: Module Size Used by p54pci 7408 0 bridge 39470 0 stp 1440 1 bridge tun 10796 6 loop 11751 0 snd_hda_codec_realtek 235506 1 p54common 20407 1 p54pci led_class 2433 1 p54common mac80211 136076 2 p54pci,p54common parport_pc 18855 0 parport 27938 1 parport_pc tpm_tis 7336 0 tpm 9917 1 tpm_tis tpm_bios 4521 1 tpm cfg80211 100776 2 p54common,mac80211 rfkill 12964 1 cfg80211 evdev 7352 0 i2c_i801 7830 0 pcspkr 1699 0 snd_hda_intel 19875 0 i2c_core 15680 1 i2c_i801 processor 30119 0 button 4650 0 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel atl1c 26108 0 snd_hwdep 5380 1 snd_hda_codec rng_core 2990 0 snd_pcm 60471 2 snd_hda_intel,snd_hda_codec snd_timer 15534 1 snd_pcm snd 46414 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6169 2 snd_hda_intel,snd_pcm sha256_generic 8692 2 aes_x86_64 7340 2 aes_generic 25698 1 aes_x86_64 cbc 2539 1 ext3 106118 3 jbd 36861 1 ext3 mbcache 5050 1 ext3 dm_crypt 10427 1 dm_mirror 10891 0 dm_region_hash 6648 1 dm_mirror dm_log 7381 2 dm_mirror,dm_region_hash dm_snapshot 18449 0 dm_mod 53530 14 dm_crypt,dm_mirror,dm_log,dm_snapshot raid456 44452 2 md_mod 73584 3 raid456 async_raid6_recov 5138 1 raid456 async_pq 3447 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2414 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy 1198 2 raid456,async_raid6_recov async_tx 1702 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy usb_storage 39353 0 sd_mod 29697 9 crc_t10dif 1276 1 sd_mod ata_piix 20964 6 ata_generic 2983 0 libata 133216 2 ata_piix,ata_generic ehci_hcd 30815 0 uhci_hcd 18457 0 scsi_mod 121845 3 usb_storage,sd_mod,libata usbcore 121751 4 usb_storage,ehci_hcd,uhci_hcd nls_base 6361 1 usbcore thermal 11674 0 fan 3346 0 thermal_sys 11942 3 processor,thermal,fan ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet manual auto br0 iface br0 inet static address 10.66.0.13 network 10.66.0.0 netmask 255.255.255.0 gateway 10.66.0.254 broadcast 10.66.1.255 bridge_ports tap10 tap11 eth0 bridge_maxwait 0 pre-up openvpn --mktun --dev tap10 pre-up openvpn --mktun --dev tap11 post-down openvpn --rmtun --dev tap10 post-down openvpn --rmtun --dev tap11 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 6c:f0:49:57:28:c4 brd ff:ff:ff:ff:ff:ff inet6 fe80::6ef0:49ff:fe57:28c4/64 scope link valid_lft forever preferred_lft forever 3: tap10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/ether ca:f3:fd:c5:90:cb brd ff:ff:ff:ff:ff:ff inet6 fe80::c8f3:fdff:fec5:90cb/64 scope link valid_lft forever preferred_lft forever 4: tap11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/ether 32:25:1f:6d:c9:d6 brd ff:ff:ff:ff:ff:ff inet6 fe80::3025:1fff:fe6d:c9d6/64 scope link valid_lft forever preferred_lft forever 5: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 32:25:1f:6d:c9:d6 brd ff:ff:ff:ff:ff:ff inet 10.66.0.13/24 brd 10.66.1.255 scope global br0 inet6 fe80::3025:1fff:fe6d:c9d6/64 scope link valid_lft forever preferred_lft forever 6: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/ether de:b8:e4:0e:f1:4d brd ff:ff:ff:ff:ff:ff inet 10.66.1.101/24 brd 10.66.1.255 scope global tap0 inet6 fe80::dcb8:e4ff:fe0e:f14d/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 21689 226 0 0 0 0 0 0 21689 226 0 0 0 0 0 0 eth0:43402313 150511 0 0 0 0 0 23843 10098754 95816 0 0 0 0 1 0 tap10: 0 0 0 0 0 0 0 0 10851293 51120 0 3 0 0 0 0 tap11: 0 0 0 0 0 0 0 0 10851293 51120 0 3 0 0 0 0 br0:41080799 150336 0 0 0 0 0 47765 9843895 95847 0 0 0 0 0 0 tap0: 309016 1572 0 0 0 0 0 0 1232324 3437 0 0 0 0 0 0 *** Protocol statistics: Ip: 131568 total packets received 0 forwarded 0 incoming packets discarded 118540 incoming packets delivered 85159 requests sent out 14 reassemblies required 7 packets reassembled ok Icmp: 28 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 16 echo requests: 5 echo replies: 7 29 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 17 echo request: 7 echo replies: 5 IcmpMsg: InType0: 7 InType3: 16 InType8: 5 OutType0: 5 OutType3: 17 OutType8: 7 Tcp: 62 active connections openings 7 passive connection openings 23 failed connection attempts 17 connection resets received 1 connections established 21677 segments received 12676 segments send out 12 segments retransmited 0 bad segments received. 43 resets sent Udp: 74182 packets received 2 packets to unknown port received. 0 packet receive errors 72462 packets sent UdpLite: TcpExt: 8 ICMP packets dropped because they were out-of-window 13 TCP sockets finished time wait in fast timer 168 delayed acks sent Quick ack mode was activated 54 times 167 packets directly queued to recvmsg prequeue. 183436 bytes directly received in process context from prequeue 16285 packet headers predicted 116 packets header predicted and directly queued to user 139 acknowledgments not containing data payload received 2705 predicted acknowledgments 4 congestion windows recovered without slow start after partial ack 11 other TCP timeouts 54 DSACKs sent for old packets 10 DSACKs received 1 connections reset due to unexpected data 15 connections reset due to early user close 1 connections aborted due to timeout TCPDSACKIgnoredOld: 4 TCPDSACKIgnoredNoUndo: 1 IpExt: InMcastPkts: 4488 InBcastPkts: 25317 OutBcastPkts: 3198 InOctets: 39074972 OutOctets: 9305132 InMcastOctets: 125664 InBcastOctets: 5221427 OutBcastOctets: 750052 *** Device features: br0: 0x111809 eth0: 0x110989 lo: 0x13865 tap0: 0x0 tap10: 0x0 tap11: 0x0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 3 Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ff00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at fdc00000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel modules: i915 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fe00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fd00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at fb00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-rng, iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f800 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Giga-byte Technology GA-8I945PG-RH Mainboard [1458:5001] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device [1969:1063] (rev c0) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 26 Region 0: Memory at fdec0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at bf00 [size=128] Capabilities: <access denied> Kernel driver in use: atl1c Kernel modules: atl1c 03:00.0 Network controller [0280]: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] [1260:3890] (rev 01) Subsystem: Standard Microsystems Corp [SMC] SMC2802W Wireless PCI Adapter [10b8:2802] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdbfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel modules: p54pci ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (700, 'stable'), (650, 'testing'), (600, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-bpo.5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-bpo.5-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux 0.92o tools for generating an initramfs ii linux-base 2.6.32-15~bpo50+1 Linux image base package ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-bpo.5-amd64 recommends: ii firmware-linux-free 2.6.32-15~bpo50+1 Binary firmware for various driver Versions of packages linux-image-2.6.32-bpo.5-amd64 suggests: ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-bpo.5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-bpo.5-amd64/prerm/removing-running-kernel-2.6.32-bpo.5-amd64: true linux-image-2.6.32-bpo.5-amd64/prerm/would-invalidate-boot-loader-2.6.32-bpo.5-amd64: true linux-image-2.6.32-bpo.5-amd64/postinst/missing-firmware-2.6.32-bpo.5-amd64: linux-image-2.6.32-bpo.5-amd64/postinst/bootloader-error-2.6.32-bpo.5-amd64: linux-image-2.6.32-bpo.5-amd64/postinst/depmod-error-initrd-2.6.32-bpo.5-amd64: false linux-image-2.6.32-bpo.5-amd64/postinst/bootloader-test-error-2.6.32-bpo.5-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100721171401.8105.92957.report...@fik