Package: linux-2.6 Version: 2.6.32-18 Severity: minor I'm getting this warning for quite a while now, but not on every boot. Stack traces below ide_pci_init_two differ slightly. I've also tried the current experimental kernel, but the warning is still there (although the stack trace is somewhat different).
-- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-18) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Sat Jul 24 03:54:06 UTC 2010 ** Command line: auto BOOT_IMAGE=debian root=/dev/mapper/vg--ogar--2009-root ** Not tainted ** Kernel log: 2.6.32-5-amd64 (Debian 2.6.32-18): [ 2.555752] ------------[ cut here ]------------ [ 2.556568] usb 5-2: configuration #1 chosen from 1 choice [ 2.560005] WARNING: at /build/buildd-linux-2.6_2.6.32-18-i386-HNrmOz/linux-2.6-2.6.32/debian/build/source_i386_none/kernel/irq/manage.c:274 enable_irq+0x48/0x7c() [ 2.560005] Hardware name: EP45T-EXTREME [ 2.560005] Unbalanced enable for IRQ 19 [ 2.560005] Modules linked in: hid uhci_hcd firewire_ohci(+) firewire_core crc_itu_t sym53c8xx(+) scsi_transport_spi it8213(+) ide_core e1000(+) thermal thermal_sys ahci libata r8169 mii igb dca ehci_hcd scsi_mod usbcore nls_base [ 2.560005] Pid: 180, comm: modprobe Not tainted 2.6.32-5-amd64 #1 [ 2.560005] Call Trace: [ 2.560005] [<ffffffff810936ee>] ? enable_irq+0x48/0x7c [ 2.560005] [<ffffffff810936ee>] ? enable_irq+0x48/0x7c [ 2.560005] [<ffffffff8104c8bc>] ? warn_slowpath_common+0x77/0xa3 [ 2.560005] [<ffffffff8104c944>] ? warn_slowpath_fmt+0x51/0x59 [ 2.560005] [<ffffffff812f3fe3>] ? schedule_timeout+0x9d/0xb8 [ 2.560005] [<ffffffff810595c8>] ? msleep+0x14/0x1e [ 2.560005] [<ffffffffa010d57c>] ? do_probe+0x1ce/0x1e6 [ide_core] [ 2.560005] [<ffffffff81191789>] ? delay_tsc+0x30/0x73 [ 2.560005] [<ffffffff810936ee>] ? enable_irq+0x48/0x7c [ 2.560005] [<ffffffffa010db11>] ? ide_probe_port+0x57d/0x5ab [ide_core] [ 2.560005] [<ffffffffa010de3a>] ? ide_host_register+0x270/0x61e [ide_core] [ 2.560005] [<ffffffffa0111e15>] ? ide_pci_init_two+0x4e5/0x5a8 [ide_core] [ 2.560005] [<ffffffff8118ad1c>] ? ida_get_new_above+0xf5/0x1b3 [ 2.560005] [<ffffffff8118ab32>] ? idr_get_empty_slot+0x16d/0x262 [ 2.560005] [<ffffffff810fcec4>] ? iput+0x27/0x60 [ 2.560005] [<ffffffff8118ad1c>] ? ida_get_new_above+0xf5/0x1b3 [ 2.560005] [<ffffffff810fcec4>] ? iput+0x27/0x60 [ 2.560005] [<ffffffff8113cdcb>] ? sysfs_addrm_finish+0x66/0x20a [ 2.560005] [<ffffffff8119e282>] ? local_pci_probe+0x12/0x16 [ 2.560005] [<ffffffff8119eed2>] ? pci_device_probe+0xc0/0xe9 [ 2.560005] [<ffffffff8121badc>] ? driver_probe_device+0xa3/0x14b [ 2.560005] [<ffffffff8121bbd3>] ? __driver_attach+0x4f/0x6f [ 2.560005] [<ffffffff8121bb84>] ? __driver_attach+0x0/0x6f [ 2.560005] [<ffffffff8121b3ab>] ? bus_for_each_dev+0x43/0x74 [ 2.560005] [<ffffffff8121ad6b>] ? bus_add_driver+0xaf/0x1f8 [ 2.560005] [<ffffffff8121be8b>] ? driver_register+0xa7/0x111 [ 2.560005] [<ffffffffa012d000>] ? it8213_ide_init+0x0/0x1a [it8213] [ 2.560005] [<ffffffff8119f118>] ? __pci_register_driver+0x50/0xb8 [ 2.560005] [<ffffffffa012d000>] ? it8213_ide_init+0x0/0x1a [it8213] [ 2.560005] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174 [ 2.560005] [<ffffffff81078d5f>] ? sys_init_module+0xc5/0x21a [ 2.560005] [<ffffffff81036462>] ? ia32_sysret+0x0/0x5 [ 2.560005] ---[ end trace b0d51b751290dae5 ]--- [ 3.048134] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.048323] hda: UDMA/100 mode selected [ 3.059719] ide0 at 0xd200-0xd207,0xd302 on irq 19 2.6.35-rc5-amd64 (Debian 2.6.35~rc5-1~experimental.1): [ 1.572006] ------------[ cut here ]------------ [ 1.572042] WARNING: at /build/buildd-linux-2.6_2.6.35~rc5-1~experimental.1-i386-gQzGH6/linux-2.6-2.6.35~rc5/debian/build/source_i386_none/kernel/irq/manage.c:290 enable_irq+0x3e/0x64() [ 1.572085] Hardware name: EP45T-EXTREME [ 1.572115] Unbalanced enable for IRQ 19 [ 1.572144] Modules linked in: hid uhci_hcd ahci libahci sym53c8xx(+) scsi_transport_spi libata e1000(+) it8213(+) firewire_ohci firewire_core crc_itu_t scsi_mod ide_core r8169 mii ehci_hcd thermal thermal_sys igb dca usbcore nls_base [ 1.572731] Pid: 209, comm: modprobe Not tainted 2.6.35-rc5-amd64 #1 [ 1.572759] Call Trace: [ 1.572788] [<ffffffff810441f3>] ? warn_slowpath_common+0x78/0x8c [ 1.572817] [<ffffffff810442a6>] ? warn_slowpath_fmt+0x45/0x4a [ 1.572850] [<ffffffffa001e388>] ? do_probe+0x1ce/0x1ea [ide_core] [ 1.572879] [<ffffffff8108be75>] ? enable_irq+0x3e/0x64 [ 1.572910] [<ffffffffa001e900>] ? ide_probe_port+0x55c/0x589 [ide_core] [ 1.572942] [<ffffffffa001ef1a>] ? ide_host_register+0x273/0x60f [ide_core] [ 1.572974] [<ffffffffa002300d>] ? ide_pci_init_two+0x5b6/0x680 [ide_core] [ 1.573004] [<ffffffff8118222c>] ? idr_get_empty_slot+0x16a/0x250 [ 1.573033] [<ffffffff81036ad8>] ? update_curr+0xb1/0x159 [ 1.573062] [<ffffffff8118222c>] ? idr_get_empty_slot+0x16a/0x250 [ 1.573090] [<ffffffff8118240b>] ? ida_get_new_above+0xf9/0x1b7 [ 1.573120] [<ffffffff811374ca>] ? sysfs_find_dirent+0x2f/0x44 [ 1.573148] [<ffffffff81137eb6>] ? sysfs_addrm_finish+0x29/0xb8 [ 1.573178] [<ffffffff81198181>] ? local_pci_probe+0x12/0x16 [ 1.573206] [<ffffffff81198f70>] ? pci_device_probe+0xc2/0xef [ 1.573236] [<ffffffff8121c1ea>] ? driver_sysfs_add+0x42/0x69 [ 1.573264] [<ffffffff8121c32b>] ? driver_probe_device+0xa8/0x138 [ 1.573292] [<ffffffff8121c40a>] ? __driver_attach+0x4f/0x6f [ 1.573321] [<ffffffff8121c3bb>] ? __driver_attach+0x0/0x6f [ 1.573349] [<ffffffff8121b9d8>] ? bus_for_each_dev+0x44/0x78 [ 1.573377] [<ffffffff8121be30>] ? bus_add_driver+0xa8/0x1f0 [ 1.573406] [<ffffffff8121c6b1>] ? driver_register+0x90/0xf8 [ 1.573434] [<ffffffff811991ba>] ? __pci_register_driver+0x4e/0xbe [ 1.573464] [<ffffffff8105f283>] ? __blocking_notifier_call_chain+0x58/0x63 [ 1.573493] [<ffffffffa0079000>] ? it8213_ide_init+0x0/0x20 [it8213] [ 1.573523] [<ffffffff81002064>] ? do_one_initcall+0x63/0x175 [ 1.573552] [<ffffffff8107086e>] ? sys_init_module+0x97/0x1d5 [ 1.573581] [<ffffffff81031342>] ? ia32_sysret+0x0/0x5 [ 1.573609] ---[ end trace 45eb7d0c4325a91a ]--- [ 1.573661] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 1.573808] hda: UDMA/100 mode selected [ 1.574046] ide0 at 0xd200-0xd207,0xd302 on irq 19 ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: EP45T-EXTREME product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F2 board_vendor: Gigabyte Technology Co., Ltd. board_name: EP45T-EXTREME board_version: x.x ** Loaded modules: Module Size Used by ppp_deflate 3410 1 zlib_deflate 17746 1 ppp_deflate bsd_comp 4452 0 ppp_async 6245 1 crc_ccitt 1323 1 ppp_async ppp_generic 19227 7 ppp_deflate,bsd_comp,ppp_async slhc 3955 1 ppp_generic binfmt_misc 6399 1 ipt_REJECT 1953 1 xt_tcpudp 2287 16 ipt_LOG 4486 1 xt_limit 1782 1 iptable_filter 2258 1 ip_tables 13675 1 iptable_filter x_tables 12685 5 ipt_REJECT,xt_tcpudp,ipt_LOG,xt_limit,ip_tables fuse 49982 4 dm_crypt 10491 0 lp 7462 0 parport 27682 1 lp ide_cd_mod 24088 0 ide_generic 1121 0 [permanent] snd_hda_codec_atihdmi 2251 1 snd_hda_codec_realtek 235042 1 snd_hda_intel 19987 4 snd_hda_codec 53892 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5236 1 snd_hda_codec snd_pcm_oss 32415 0 snd_mixer_oss 12478 2 snd_pcm_oss snd_pcm 60119 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4256 0 snd_rawmidi 15323 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 41281 2 snd_seq_midi,snd_seq_midi_event snd_timer 15486 3 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq radeon 571738 2 ttm 39986 1 radeon snd 45918 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device drm_kms_helper 20017 1 radeon soundcore 4566 2 snd drm 142199 5 radeon,ttm,drm_kms_helper i2c_algo_bit 4225 1 radeon snd_page_alloc 6217 2 snd_hda_intel,snd_pcm i2c_i801 7750 0 i2c_core 15328 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 processor 30167 2 button 4650 0 pcspkr 1699 0 evdev 7352 5 e100 25860 0 ext3 106326 5 jbd 36861 1 ext3 mbcache 5050 1 ext3 dm_mirror 10843 0 dm_region_hash 6680 1 dm_mirror dm_log 7381 2 dm_mirror,dm_region_hash dm_snapshot 18481 0 dm_mod 53434 16 dm_crypt,dm_mirror,dm_log,dm_snapshot raid10 17553 1 raid1 17999 1 md_mod 73152 4 raid10,raid1 sg 18632 0 sr_mod 12250 1 cdrom 28631 2 ide_cd_mod,sr_mod sd_mod 29553 10 crc_t10dif 1276 1 sd_mod ide_gd_mod 20289 0 usbhid 33244 0 ata_generic 2983 0 hid 62809 1 usbhid uhci_hcd 18521 0 it8213 2524 0 ahci 32310 9 firewire_ohci 19420 0 ehci_hcd 31119 0 libata 133072 2 ata_generic,ahci sym53c8xx 64280 0 scsi_transport_spi 18566 1 sym53c8xx ide_core 71482 4 ide_cd_mod,ide_generic,ide_gd_mod,it8213 firewire_core 36656 1 firewire_ohci crc_itu_t 1307 1 firewire_core e1000 85453 0 scsi_mod 121717 6 sg,sr_mod,sd_mod,libata,sym53c8xx,scsi_transport_spi igb 77895 0 dca 3761 1 igb r8169 28893 0 mii 3210 2 e100,r8169 thermal 11610 0 thermal_sys 11942 2 processor,thermal usbcore 121671 4 usbhid,uhci_hcd,ehci_hcd nls_base 6361 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e500 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e100 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at ec205000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:a102] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at ec200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: e6000000-e7ffffff Prefetchable memory behind bridge: 00000000ec400000-00000000ecbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: e8000000-e8ffffff Prefetchable memory behind bridge: 00000000ec100000-00000000ec1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e9000000-e9ffffff Prefetchable memory behind bridge: 00000000ec000000-00000000ec0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e200 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e300 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ec204000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ea000000-ebffffff Prefetchable memory behind bridge: 00000000ec300000-00000000ec3fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 35 Region 0: I/O ports at e600 [size=8] Region 1: I/O ports at e700 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e900 [size=4] Region 4: I/O ports at ea00 [size=32] Region 5: Memory at ec206000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at ec207000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 LE [Radeon HD 4800 Series] [1002:944c] (prog-if 00 [VGA controller]) Subsystem: Hightech Information System Ltd. Device [1787:2003] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e5000000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 9000 [size=256] [virtual] Expansion ROM at e4000000 [disabled] [size=128K] Capabilities: <access denied> 01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30] Subsystem: Hightech Information System Ltd. Device [1787:aa30] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at e5010000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 02:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter [8086:a03c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e7820000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at a000 [size=32] Region 3: Memory at e7840000 (32-bit, non-prefetchable) [size=16K] [virtual] Expansion ROM at ec400000 [disabled] [size=4M] Capabilities: <access denied> Kernel driver in use: igb 02:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01) Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter [8086:a03c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at e7800000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at a100 [size=32] Region 3: Memory at e7844000 (32-bit, non-prefetchable) [size=16K] [virtual] Expansion ROM at ec800000 [disabled] [size=4M] Capabilities: <access denied> Kernel driver in use: igb 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at b000 [size=256] Region 2: Memory at ec110000 (64-bit, prefetchable) [size=4K] Region 4: Memory at ec100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at ec120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: I/O ports at c000 [size=256] Region 2: Memory at ec010000 (64-bit, prefetchable) [size=4K] Region 4: Memory at ec000000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at ec020000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 05:00.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1076] Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:1176] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at eb020000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at eb000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d000 [size=64] [virtual] Expansion ROM at ec300000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: e1000 05:02.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c895 [1000:000c] (rev 01) Subsystem: Tekram Technology Co.,Ltd. DC-390U2W [1de1:3907] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (7500ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at d100 [size=256] Region 1: Memory at eb046000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at eb044000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at ec320000 [disabled] [size=64K] Kernel driver in use: sym53c8xx 05:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at eb045000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at eb040000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:07.0 IDE interface [0101]: Integrated Technology Express, Inc. IT8213 IDE Controller [1283:8213] (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d200 [size=8] Region 1: I/O ports at d300 [size=4] Region 2: I/O ports at d400 [size=8] Region 3: I/O ports at d500 [size=4] Region 4: I/O ports at d600 [size=16] Capabilities: <access denied> Kernel driver in use: ITE8213_IDE ** USB devices: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 046d:c025 Logitech, Inc. MX500 Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 5.0.5 APT prefers stable APT policy: (820, 'stable'), (600, 'unstable'), (550, 'testing'), (510, 'experimental'), (500, 'oldstable') Architecture: i386 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [deb 1.5.24 Debian configuration management sy ii initramfs-to 0.97.2 tools for generating an initramfs ii linux-base 2.6.35~rc5-1~experimental.1 Linux image base package ii module-init- 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-18 Binary firmware for various driver ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-amd64 suggests: ii lilo 1:22.8-8.1 LInux LOader - The Classic OS load pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.26 Binary firmware for various driver ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100725223004.5262.16774.report...@localhost