On Fri, Aug 27, 2010 at 02:31:22PM +1000, Ben Hutchings wrote:
>
> I've committed support for this in the svn repository branch for lenny.
> You can build and test this now by following the instructions at
> <http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official-vcs>
> or wait for version 2.6.26-25 to appear in stable-proposed-updates.
>
With a little guidance from Ben I was able to build a package
(linux-image-2.6.26-2-686_2.6.26-25_i386.deb) and install it.
The network card is now recognized and so far it is working ok.
Details in the attachments.
Many thanks for the quick response!
--
% lspci -kvvv -s 00:19.0
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network
Connection (rev 02)
Subsystem: Dell Device 0276
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 220
Region 0: Memory at fdfe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fdfd9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ece0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
% lspci -knn -s 00:19.0
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Kernel driver in use: e1000e
Kernel modules: e1000e
% dmesg |grep eth0
[ 3.978370] eth0: (PCI Express:2.5GB/s:Width x1) b8:ac:6f:3e:71:bb
[ 3.978423] eth0: Intel(R) PRO/1000 Network Connection
[ 3.978505] eth0: MAC: 8, PHY: 8, PBA No: 2011ff-0ff
[ 56.485401] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 56.485463] eth0: 10/100 speed: disabling TSO
% sudo ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 2
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0x00000001 (1)
Link detected: yes
