Package: linux-2.6 Version: 2.6.26-25lenny1 Severity: normal Hello!
When X unblanks the screen, or when I switch from text mode to X, the screen brightness is reset to 100%, independently of the previous level. When the 'video' module is not loaded, it doesn't happen, but then the screen brightness cannot be changed anymore. It seems to be related to a kernel patch. https://bbs.archlinux.org/viewtopic.php?pid=435503 https://bugzilla.kernel.org/show_bug.cgi?id=11769 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=c2c789057f075022658b38b498755c29c1ba8055 I'm using a Toshiba M205 S4804 laptop. -- Package-specific info: ** Version: Linux version 2.6.26-2-amd64 (Debian 2.6.26-25lenny1) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Sep 16 15:56:38 UTC 2010 ** Command line: root=/dev/sda2 ro quiet ** Not tainted ** Kernel log: [ 8.194819] kjournald starting. Commit interval 5 seconds [ 8.194841] EXT3-fs: mounted filesystem with ordered data mode. [ 9.425823] vga16fb: initializing [ 9.425827] vga16fb: mapped to 0xffff8100000a0000 [ 9.548080] Console: switching to colour frame buffer device 80x30 [ 9.554762] fb0: VGA16 VGA frame buffer device [ 9.848058] udevd version 125 started [ 10.542289] agpgart: Detected an Intel 965GM Chipset. [ 10.542289] agpgart: Detected 7676K stolen memory. [ 10.554760] agpgart: AGP aperture is 256M @ 0xd0000000 [ 10.593201] ACPI: Battery Slot [BAT0] (battery present) [ 10.747972] ACPI: AC Adapter [ADP0] (on-line) [ 10.780737] input: Power Button (FF) as /class/input/input2 [ 10.830451] ACPI: Power Button (FF) [PWRF] [ 10.830625] input: Lid Switch as /class/input/input3 [ 10.863846] ACPI: Lid Switch [LID] [ 10.863930] input: Power Button (CM) as /class/input/input4 [ 10.921671] ACPI: Power Button (CM) [PWRB] [ 10.925440] ACPI: device:04 is registered as cooling_device3 [ 10.925611] input: Video Bus as /class/input/input5 [ 10.981826] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.984541] ACPI: device:0a is registered as cooling_device4 [ 10.984861] input: Video Bus as /class/input/input6 [ 11.046517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.266185] input: PC Speaker as /class/input/input7 [ 11.296910] Linux video capture interface: v2.00 [ 11.322273] Yenta: CardBus bridge found at 0000:08:06.0 [1179:ff10] [ 11.322273] PCI: Bus 9, cardbus bridge: 0000:08:06.0 [ 11.322273] IO window: 0x00007000-0x000070ff [ 11.322273] IO window: 0x00007400-0x000074ff [ 11.322273] PREFETCH window: 0x88400000-0x887fffff [ 11.322273] MEM window: 0x8c000000-0x8fffffff [ 11.322273] Yenta: Enabling burst memory read transactions [ 11.322273] Yenta: Using CSCINT to route CSC interrupts to PCI [ 11.322273] Yenta: Routing CardBus interrupts to PCI [ 11.322273] Yenta TI: socket 0000:08:06.0, mfunc 0x01aa1b22, devctl 0x66 [ 11.537067] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 11.541058] input: Chicony USB 2.0 Camera as /class/input/input8 [ 11.556658] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 [ 11.556662] Socket status: 30000006 [ 11.556666] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c [ 11.556672] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 11.556675] pcmcia: parent PCI bridge Memory window: 0xf5200000 - 0xf52fffff [ 11.558678] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19 [ 11.558678] ACPI: PCI Interrupt 0000:08:06.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 11.566492] Error: Driver 'pcspkr' is already registered, aborting... [ 11.574461] usbcore: registered new interface driver uvcvideo [ 11.574461] USB Video Class driver (v0.1.0) [ 11.618463] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 11.618463] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 11.834463] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 11.834463] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 11.834463] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 11.834463] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 11.834463] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 11.894441] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 11.898167] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 12.009956] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 12.050060] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81c0b1, caps: 0xa04711/0xa00000 [ 12.079888] input: SynPS/2 Synaptics TouchPad as /class/input/input9 [ 13.866027] Adding 3148732k swap on /dev/sda3. Priority:-1 extents:1 across:3148732k [ 14.308492] EXT3 FS on sda2, internal journal [ 14.870618] loop: module loaded [ 15.203300] fuse init (API version 7.9) [ 15.279996] kjournald starting. Commit interval 5 seconds [ 15.292470] EXT3 FS on sda4, internal journal [ 15.292475] EXT3-fs: mounted filesystem with ordered data mode. [ 16.123229] sky2 eth0: enabling interface [ 17.926311] RPC: Registered udp transport module. [ 17.926314] RPC: Registered tcp transport module. [ 18.187722] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 19.262040] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 20.023531] NET: Registered protocol family 10 [ 20.023531] lo: Disabled Privacy Extensions [ 20.126639] [drm] Initialized drm 1.1.0 20060810 [ 20.144338] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.144338] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.144338] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 32.954597] eth0: no IPv6 routers present [ 37.689927] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 2919.646110] ACPI: device:04 is registered as cooling_device3 [ 2919.646110] input: Video Bus as /class/input/input10 [ 2919.693978] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2919.698631] ACPI: device:0a is registered as cooling_device4 [ 2919.699133] input: Video Bus as /class/input/input11 [ 2919.734375] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3021.705743] video: Unknown parameter `brigtness_switch_enabled' [ 3027.881595] video: Unknown parameter `brigthness_switch_enabled' [ 3040.454277] ACPI: device:04 is registered as cooling_device3 [ 3040.454579] input: Video Bus as /class/input/input12 [ 3040.506363] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3040.509220] ACPI: device:0a is registered as cooling_device4 [ 3040.511498] input: Video Bus as /class/input/input13 [ 3040.562849] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4465.407325] ACPI: device:04 is registered as cooling_device3 [ 4465.407614] input: Video Bus as /class/input/input14 [ 4465.453897] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4465.458303] ACPI: device:0a is registered as cooling_device4 [ 4465.458828] input: Video Bus as /class/input/input15 [ 4465.509790] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ** Model information sys_vendor: TOSHIBA product_name: Satellite M205 product_version: PSMC3U-02X015 chassis_vendor: No Enclosure chassis_version: N/A bios_vendor: Phoenix Technologies LTD bios_version: 1.90 board_vendor: Intel Corporation board_name: SANTA ROSA CRB board_version: Not Applicable ** Loaded modules: Module Size Used by video 24212 0 output 7808 1 video i915 35072 1 drm 91488 2 i915 ipv6 288456 25 acpi_cpufreq 11792 1 cpufreq_userspace 8452 0 cpufreq_ondemand 11792 1 cpufreq_conservative 11784 0 cpufreq_stats 9120 0 freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats cpufreq_powersave 6400 0 nfsd 248488 4 auth_rpcgss 47520 1 nfsd exportfs 8704 1 nfsd nfs 252080 0 lockd 68944 2 nfsd,nfs nfs_acl 7552 2 nfsd,nfs sunrpc 197992 9 nfsd,auth_rpcgss,nfs,lockd,nfs_acl fuse 53184 1 sbp2 25356 0 loop 19468 0 joydev 14848 0 arc4 6272 2 ecb 7296 2 crypto_blkcipher 21636 1 ecb iwl3945 92916 0 pcmcia 38680 0 firmware_class 12544 2 iwl3945,pcmcia mac80211 163120 1 iwl3945 snd_hda_intel 436696 0 led_class 8968 1 iwl3945 uvcvideo 55688 0 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss tifm_7xx1 10368 0 i2c_i801 13596 0 psmouse 42268 0 compat_ioctl32 12544 1 uvcvideo i2c_core 27936 1 i2c_i801 yenta_socket 27916 1 rsrc_nonstatic 14080 1 yenta_socket serio_raw 9988 0 videodev 35840 2 uvcvideo,compat_ioctl32 tifm_core 13640 1 tifm_7xx1 snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss pcspkr 7040 0 pcmcia_core 41508 3 pcmcia,yenta_socket,rsrc_nonstatic cfg80211 30224 2 iwl3945,mac80211 v4l1_compat 17284 2 uvcvideo,videodev snd_timer 25744 1 snd_pcm snd 63688 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm button 11680 0 ac 9352 0 battery 16904 0 intel_agp 31856 1 evdev 14208 0 vga16fb 16536 1 vgastate 12800 1 vga16fb ext3 125072 2 jbd 51240 1 ext3 mbcache 12804 1 ext3 ide_cd_mod 36360 0 cdrom 37928 1 ide_cd_mod ide_pci_generic 9220 0 [permanent] piix 12424 0 [permanent] ide_core 128284 3 ide_cd_mod,ide_pci_generic,piix sd_mod 29376 4 ohci1394 32692 0 sdhci 19460 0 ieee1394 93944 2 sbp2,ohci1394 mmc_core 52448 1 sdhci ata_generic 10116 0 ahci 33036 3 libata 165600 2 ata_generic,ahci scsi_mod 161016 3 sbp2,sd_mod,libata dock 14112 1 libata sky2 48132 0 ehci_hcd 36108 0 uhci_hcd 25760 0 thermal 22688 0 processor 42304 4 acpi_cpufreq,thermal fan 9352 0 thermal_sys 17728 4 video,thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f5000000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f5100000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f5504800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f5300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0000000-f0ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f1000000-f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f2000000-f2ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: f3000000-f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: f4000000-f4ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f5504c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=08, subordinate=0c, sec-latency=32 I/O behind bridge: 00007000-00007fff Memory behind bridge: f5200000-f52fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: ata_generic, piix, ide-pci-generic 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 1274 Region 0: I/O ports at 1c00 [size=8] Region 1: I/O ports at 18d4 [size=4] Region 2: I/O ports at 18d8 [size=8] Region 3: I/O ports at 18d0 [size=4] Region 4: I/O ports at 18e0 [size=32] Region 5: Memory at f5504000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c20 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 14) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1273 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 2000 [size=256] Capabilities: <access denied> Kernel driver in use: sky2 Kernel modules: sky2 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1040] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 17 Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 Kernel modules: iwl3945 08:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f5204000 (32-bit, non-prefetchable) [size=4K] Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 88400000-887ff000 (prefetchable) Memory window 1: 8c000000-8ffff000 I/O window 0: 00007000-000070ff I/O window 1: 00007400-000074ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 08:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f5206000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f5200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 08:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f5205000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: tifm_7xx1 Kernel modules: tifm_7xx1 08:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f5206800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci ** USB devices: Bus 003 Device 002: ID 04f2:b008 Chicony Electronics Co., Ltd USB 2.0 Camera Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.6 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-2-amd64 recommends no packages. Versions of packages linux-image-2.6.26-2-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) Versions of packages linux-image-2.6.26-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-amd64/postinst/bootloader-error-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/lilo-initrd-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/depmod-error-2.6.26-2-amd64: false linux-image-2.6.26-2-amd64/postinst/old-dir-initrd-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/create-kimage-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/preinst/initrd-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-amd64/preinst/abort-install-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/postinst/old-initrd-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/depmod-error-initrd-2.6.26-2-amd64: false linux-image-2.6.26-2-amd64/postinst/bootloader-test-error-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/overwriting-modules-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-2-amd64/preinst/failed-to-move-modules-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/prerm/would-invalidate-boot-loader-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/postinst/old-system-map-link-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/preinst/abort-overwrite-2.6.26-2-amd64: linux-image-2.6.26-2-amd64/preinst/bootloader-initrd-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/preinst/elilo-initrd-2.6.26-2-amd64: true linux-image-2.6.26-2-amd64/prerm/removing-running-kernel-2.6.26-2-amd64: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20101014021627.4000.55019.report...@eukleides