Package: linux-2.6 Version: 2.6.32-23 Severity: critical Justification: causes serious data loss
I hibernated in Lenny, using the same kernel version. The next day I accidentally selected Squeeze from the grub2 menu. Squeeze started up normally and reported on filesystems not cleanly closed and orphaned inodes. -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Fri Sep 17 21:50:19 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64.squeeze root=/dev/mapper/VgCompaq-squeeze resume=/dev/VgCompaq/swap ro quiet splash vga=0x317 cryptopts=target=sda4_crypt,source=UUID=41d45178-c0d4-4d8f-a190-1c56b6328318,key=none,rootdev,lvm=VgCompaq-squeeze ** Not tainted ** Kernel log: [ 10.672142] ACPI: AC Adapter [AC] (on-line) [ 10.672512] ACPI: WMI: Mapper loaded [ 10.727880] udev: renamed network interface eth0 to eth1 [ 10.756239] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 10.847978] i801_smbus 0000:00:1f.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 11.237050] [drm] Initialized drm 1.1.0 20060810 [ 11.315582] cfg80211: Using static regulatory domain info [ 11.315585] cfg80211: Regulatory domain: US [ 11.315588] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.315591] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 11.315595] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 11.315601] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 11.315601] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 11.315604] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 11.315607] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 11.315618] cfg80211: Calling CRDA for country: US [ 11.387778] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 [ 11.423406] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 11.546159] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.546165] i915 0000:00:02.0: setting latency timer to 64 [ 11.561342] alloc irq_desc for 26 on node -1 [ 11.561347] alloc kstat_irqs on node -1 [ 11.561358] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 11.561367] [drm] set up 7M of stolen space [ 11.659728] Linux video capture interface: v2.00 [ 11.686036] [drm] initialized overlay support [ 11.754445] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.754469] ath5k 0000:01:00.0: setting latency timer to 64 [ 11.754544] ath5k 0000:01:00.0: registered as 'phy0' [ 11.948683] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057) [ 11.952488] input: CNF7041 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9 [ 11.952586] usbcore: registered new interface driver uvcvideo [ 11.952794] USB Video Class driver (v0.1.0) [ 12.254885] ath: EEPROM regdomain: 0x67 [ 12.254888] ath: EEPROM indicates we should expect a direct regpair map [ 12.254893] ath: Country alpha2 being used: 00 [ 12.254895] ath: Regpair used: 0x67 [ 12.364329] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 12.364401] Console: switching to colour dummy device 80x25 [ 12.364878] Console: switching to colour frame buffer device 180x56 [ 12.374279] phy0: Selected rate control algorithm 'minstrel' [ 12.375014] Registered led device: ath5k-phy0::rx [ 12.375033] Registered led device: ath5k-phy0::tx [ 12.375036] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 12.488180] fb0: inteldrmfb frame buffer device [ 12.488183] registered panic notifier [ 12.489089] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 12.500533] acpi device:15: registered as cooling_device2 [ 12.501050] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 12.501121] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 12.501165] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 12.501250] alloc irq_desc for 22 on node -1 [ 12.501252] alloc kstat_irqs on node -1 [ 12.501263] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.501347] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.685629] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.685740] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.685811] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 13.817381] loop: module loaded [ 14.702057] Adding 5857272k swap on /dev/mapper/VgCompaq-swap. Priority:-1 extents:1 across:5857272k [ 36.355840] kjournald starting. Commit interval 5 seconds [ 36.356023] EXT3 FS on sda1, internal journal [ 36.356029] EXT3-fs: mounted filesystem with ordered data mode. [ 36.449623] kjournald starting. Commit interval 5 seconds [ 36.452298] EXT3 FS on dm-3, internal journal [ 36.452304] EXT3-fs: mounted filesystem with ordered data mode. [ 36.518084] kjournald starting. Commit interval 5 seconds [ 36.520276] EXT3 FS on dm-4, internal journal [ 36.520282] EXT3-fs: mounted filesystem with ordered data mode. [ 36.593588] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 37.859417] fuse init (API version 7.13) [ 39.473309] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 [ 40.830272] Bluetooth: Core ver 2.15 [ 40.830362] NET: Registered protocol family 31 [ 40.830364] Bluetooth: HCI device and connection manager initialized [ 40.830368] Bluetooth: HCI socket layer initialized [ 40.929776] Bluetooth: L2CAP ver 2.14 [ 40.929779] Bluetooth: L2CAP socket layer initialized [ 41.024027] Bluetooth: RFCOMM TTY layer initialized [ 41.024032] Bluetooth: RFCOMM socket layer initialized [ 41.024034] Bluetooth: RFCOMM ver 1.11 [ 41.273549] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.273553] Bluetooth: BNEP filters: protocol multicast [ 41.392621] Bridge firewalling registered [ 41.528196] Bluetooth: SCO (Voice Link) ver 0.6 [ 41.528200] Bluetooth: SCO socket layer initialized [ 42.933819] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.942776] eth1: link down [ 42.943495] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 44.345709] lp: driver loaded but no devices found [ 44.386697] ppdev: user-space parallel port driver [ 86.274662] wlan0: direct probe to AP 00:14:d1:57:20:2d (try 1) [ 86.278055] wlan0: direct probe responded [ 86.278066] wlan0: authenticate with AP 00:14:d1:57:20:2d (try 1) [ 86.279848] wlan0: authenticated [ 86.279885] wlan0: associate with AP 00:14:d1:57:20:2d (try 1) [ 86.382580] wlan0: RX AssocResp from 00:14:d1:57:20:2d (capab=0x431 status=0 aid=1) [ 86.382589] wlan0: associated [ 86.384781] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 96.852103] wlan0: no IPv6 routers present ** Model information sys_vendor: Hewlett-Packard product_name: Compaq Presario A900 Notebook PC product_version: F.34 chassis_vendor: Hewlett-Packard chassis_version: N/A bios_vendor: Hewlett-Packard bios_version: F.34 board_vendor: Hewlett-Packard board_name: 30ED board_version: 83.21 ** Loaded modules: Module Size Used by acpi_cpufreq 5523 0 cpufreq_powersave 902 0 cpufreq_stats 2659 0 cpufreq_userspace 1960 0 cpufreq_conservative 5162 0 parport_pc 18855 0 ppdev 5030 0 lp 7462 0 parport 27954 3 parport_pc,ppdev,lp sco 7209 2 bridge 39470 0 stp 1440 1 bridge bnep 9363 2 rfcomm 29533 0 l2cap 24736 4 bnep,rfcomm bluetooth 41763 6 sco,bnep,rfcomm,l2cap uinput 6376 1 fuse 49998 1 ext3 106134 3 jbd 36877 1 ext3 loop 11767 0 snd_hda_codec_conexant 21869 1 arc4 1274 2 ecb 1841 2 uvcvideo 51887 0 snd_hda_intel 19955 1 ath5k 112034 0 mac80211 136604 1 ath5k snd_hda_codec 54244 2 snd_hda_codec_conexant,snd_hda_intel videodev 29881 1 uvcvideo v4l1_compat 11442 2 uvcvideo,videodev v4l2_compat_ioctl32 8474 1 videodev ath 7974 1 ath5k i915 254663 2 snd_hwdep 5380 1 snd_hda_codec joydev 8411 0 snd_pcm 60503 2 snd_hda_intel,snd_hda_codec snd_seq 42737 0 cfg80211 100792 3 ath5k,mac80211,ath snd_timer 15582 2 snd_pcm,snd_seq drm_kms_helper 20033 1 i915 snd_seq_device 4493 1 snd_seq drm 142151 3 i915,drm_kms_helper snd 46414 10 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device rfkill 12964 3 bluetooth,cfg80211 i2c_algo_bit 4225 1 i915 soundcore 4598 1 snd led_class 2433 1 ath5k video 17445 1 i915 snd_page_alloc 6169 2 snd_hda_intel,snd_pcm i2c_i801 7830 0 psmouse 49729 0 i2c_core 15680 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 pcspkr 1699 0 serio_raw 3752 0 wmi 4323 0 output 1692 1 video ac 2192 0 evdev 7352 26 processor 30239 3 acpi_cpufreq battery 4998 0 button 4650 1 i915 ext4 288329 2 mbcache 5050 2 ext3,ext4 jbd2 66759 1 ext4 crc16 1319 2 l2cap,ext4 sha256_generic 8692 2 aes_x86_64 7340 3 aes_generic 25714 1 aes_x86_64 cbc 2539 1 dm_crypt 10427 1 usb_storage 39529 0 dm_mod 53562 19 dm_crypt sg 18712 0 sd_mod 29713 3 sr_mod 12602 0 cdrom 29415 1 sr_mod crc_t10dif 1276 1 sd_mod ata_generic 2983 0 ata_piix 21092 0 8139too 17869 0 ahci 32310 2 uhci_hcd 18457 0 8139cp 15813 0 mii 3210 2 8139too,8139cp thermal 11674 0 thermal_sys 11942 3 video,processor,thermal libata 133328 3 ata_generic,ata_piix,ahci ehci_hcd 30895 0 scsi_mod 121861 5 usb_storage,sg,sd_mod,sr_mod,libata usbcore 121698 5 uvcvideo,usb_storage,uhci_hcd,ehci_hcd nls_base 6377 1 usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:1e:ec:86:54:52 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:22:68:98:c3:98 brd ff:ff:ff:ff:ff:ff inet 192.168.10.101/24 brd 192.168.10.255 scope global wlan0 inet6 fe80::222:68ff:fe98:c398/64 scope link valid_lft forever preferred_lft forever 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 76:ed:0c:c5:80:86 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 13924 214 0 0 0 0 0 0 13924 214 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 8558868 8724 0 0 0 0 0 0 1851529 8534 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 9002 total packets received 0 forwarded 0 incoming packets discarded 9002 incoming packets delivered 8599 requests sent out 8 outgoing packets dropped Icmp: 16 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 16 16 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 16 IcmpMsg: InType3: 16 OutType3: 16 Tcp: 531 active connections openings 7 passive connection openings 54 failed connection attempts 15 connection resets received 1 connections established 8537 segments received 8132 segments send out 47 segments retransmited 0 bad segments received. 83 resets sent Udp: 355 packets received 16 packets to unknown port received. 0 packet receive errors 390 packets sent UdpLite: TcpExt: 1 packets pruned from receive queue because of socket buffer overrun 317 TCP sockets finished time wait in fast timer 4 time wait sockets recycled by time stamp 3 packets rejects in established connections because of timestamp 191 delayed acks sent Quick ack mode was activated 21 times 5021 packet headers predicted 880 acknowledgments not containing data payload received 187 predicted acknowledgments 23 congestion windows recovered without slow start after partial ack 36 other TCP timeouts 30 packets collapsed in receive queue due to low socket buffer 22 DSACKs sent for old packets 6 DSACKs received 1 connections reset due to unexpected data 3 connections reset due to early user close 2 connections aborted due to timeout TCPDSACKIgnoredNoUndo: 6 TCPSackShiftFallback: 3 IpExt: InMcastPkts: 211 OutMcastPkts: 147 InBcastPkts: 1 InOctets: 8459285 OutOctets: 1576213 InMcastOctets: 15257 OutMcastOctets: 13489 InBcastOctets: 576 *** Device features: eth1: 0x829 lo: 0x13865 pan0: 0xff3865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 26 Region 0: Memory at d1000000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 30d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d1100000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 04) Subsystem: Conexant Systems, Inc. Presario C700 [14f1:5051] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 22 Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d1300000-d23fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 21 Region 4: I/O ports at 3080 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 3060 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 4: I/O ports at 3040 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d2404800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: d1200000-d12fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 04) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 30a0 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 25 Region 0: I/O ports at 30b8 [size=8] Region 1: I/O ports at 30dc [size=4] Region 2: I/O ports at 30b0 [size=8] Region 3: I/O ports at 30d8 [size=4] Region 4: I/O ports at 3020 [size=32] Region 5: Memory at d2404000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 04) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 19 Region 0: Memory at d2404c00 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3000 [size=32] Kernel driver in use: i801_smbus 01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:137b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d1300000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at d1200000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04f2:b057 Chicony Electronics Co., Ltd integrated USB webcam Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.4 tools for generating an initramfs ii linux-base 2.6.32-23 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20101014163411.3319.76164.report...@potemkin.home