On Thu, 12 May 2011, Ben Hutchings wrote: > On Wed, 2011-05-11 at 22:55 +0100, Sabahattin Gucukoglu wrote: >> Package: linux-2.6 >> Version: 2.6.38-5 >> Severity: important >> >> (reportbug script died, hope you've got everything.) >> >> The machine runs with *HORRIBLE* clock drift (see text). Eventually, the >> system will slow right down, so that new processes or threads will not >> start. It *seems* to be related to the use of BRLTTY. See this thread: >> http://www.mail-archive.com/brltty@mielke.cc/msg05352.html >> >> And, yes, it's annoying having to hard-reboot the box every so often. It >> would seem that after some period of time, touching my display or the >> physical console triggers the lockup. I don't think this is a coincidence, >> even though on the surface there are two different problems. The kernel >> upgrade was sufficient to begin these issues. > > Could you also send a log from an earlier kernel version where this > problem does not occur?
You already have the later kernel log; here are the earlier log, the precise ntpd from that time, and the not-so-precise ntpd from today using the same clocksource. Cheers, Sabahattin Kernel log: Apr 28 08:30:03 Bloodstone kernel: imklog 4.6.1, log source = /proc/kmsg started. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] KERNEL supported cpus: Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Intel GenuineIntel Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] AMD AuthenticAMD Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] NSC Geode by NSC Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Cyrix CyrixInstead Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Centaur CentaurHauls Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Transmeta GenuineTMx86 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Transmeta TransmetaCPU Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] UMC UMC UMC UMC Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-provided physical RAM map: Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] DMI 2.1 present. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] MTRR default type: uncachable Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] MTRR fixed ranges enabled: Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 00000-9FFFF write-back Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] A0000-BFFFF uncachable Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] C0000-C7FFF write-protect Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] C8000-FFFFF uncachable Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] MTRR variable ranges enabled: Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 0 base 000000000 mask FF0000000 write-back Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 1 base 0DD000000 mask FFFC00000 write-combining Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 2 disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 3 disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 4 disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 5 disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 6 disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 7 disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] PAT not supported by CPU. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] initial memory mapped : 0 - 01800000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 0000400000 - 000fc00000 page 2M Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 000fc00000 - 000fff0000 page 4k Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] kernel direct mapping tables up to fff0000 @ 7000-d000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] RAMDISK: 0adbf000 - 0c033873 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] ACPI: RSDP 000f6bf0 00014 (v00 VIA694) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] ACPI: RSDT 0fff3000 00028 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] ACPI: FACP 0fff3040 00074 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] ACPI: DSDT 0fff30c0 0226C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] ACPI: FACS 0fff0000 00040 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 0MB HIGHMEM available. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 255MB LOWMEM available. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] mapped low ram: 0 - 0fff0000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] low ram: 0 - 0fff0000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] node 0 low ram: 00000000 - 0fff0000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] node 0 bootmap 00002000 - 00004000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #4 [000adbf000 - 000c033873] RAMDISK ==> [000adbf000 - 000c033873] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #6 [00014a2000 - 00014a8092] BRK ==> [00014a2000 - 00014a8092] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000] Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Zone PFN ranges: Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Normal 0x00001000 -> 0x0000fff0 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Movable zone start PFN for each node Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] early_node_map[2] active PFN ranges Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] 0: 0x00000100 -> 0x0000fff0 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] On node 0 totalpages: 65423 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] DMA zone: 32 pages used for memmap Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] DMA zone: 0 pages reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Normal zone: 480 pages used for memmap Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Normal zone: 60944 pages, LIFO batch:15 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Using APIC driver default Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] APIC: disable apic facility Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] nr_irqs_gsi: 16 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34072 r0 d23272 u4194304 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] pcpu-alloc: s34072 r0 d23272 u4194304 alloc=1*4194304 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] pcpu-alloc: [0] 0 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64911 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=3b61a0a8-b642-4e7c-b846-e1e9e16019cb ro bootkbd=uk quiet Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Enabling fast FPU save and restore... done. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Initializing CPU#0 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Memory: 235352k/262080k available (2414k kernel code, 26028k reserved, 1266k data, 368k init, 0k highmem) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] virtual kernel memory layout: Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] vmalloc : 0xd07f0000 - 0xff3fe000 ( 748 MB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB) Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Hierarchical RCU implementation. Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] NR_IRQS:1280 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Console: colour VGA+ 80x25 Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] console [tty0] enabled Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Fast TSC calibration using PIT Apr 28 08:30:03 Bloodstone kernel: [ 0.000000] Detected 400.921 MHz processor. Apr 28 08:30:03 Bloodstone kernel: [ 0.008014] Calibrating delay loop (skipped), value calculated using timer frequency.. 801.84 BogoMIPS (lpj=1603684) Apr 28 08:30:03 Bloodstone kernel: [ 0.008101] Security Framework initialized Apr 28 08:30:03 Bloodstone kernel: [ 0.008129] SELinux: Disabled at boot. Apr 28 08:30:03 Bloodstone kernel: [ 0.008168] Mount-cache hash table entries: 512 Apr 28 08:30:03 Bloodstone kernel: [ 0.012523] Initializing cgroup subsys ns Apr 28 08:30:03 Bloodstone kernel: [ 0.012543] Initializing cgroup subsys cpuacct Apr 28 08:30:03 Bloodstone kernel: [ 0.012568] Initializing cgroup subsys devices Apr 28 08:30:03 Bloodstone kernel: [ 0.012582] Initializing cgroup subsys freezer Apr 28 08:30:03 Bloodstone kernel: [ 0.012594] Initializing cgroup subsys net_cls Apr 28 08:30:03 Bloodstone kernel: [ 0.012700] CPU: L1 I cache: 16K, L1 D cache: 16K Apr 28 08:30:03 Bloodstone kernel: [ 0.012718] CPU: L2 cache: 512K Apr 28 08:30:03 Bloodstone kernel: [ 0.012738] mce: CPU supports 5 MCE banks Apr 28 08:30:03 Bloodstone kernel: [ 0.012811] Performance Events: Apr 28 08:30:03 Bloodstone kernel: [ 0.012824] no APIC, boot with the "lapic" boot parameter to force-enable it. Apr 28 08:30:03 Bloodstone kernel: [ 0.012836] no hardware sampling interrupt available. Apr 28 08:30:03 Bloodstone kernel: [ 0.012848] p6 PMU driver. Apr 28 08:30:03 Bloodstone kernel: [ 0.012912] ... version: 0 Apr 28 08:30:03 Bloodstone kernel: [ 0.012922] ... bit width: 32 Apr 28 08:30:03 Bloodstone kernel: [ 0.012933] ... generic registers: 2 Apr 28 08:30:03 Bloodstone kernel: [ 0.012944] ... value mask: 00000000ffffffff Apr 28 08:30:03 Bloodstone kernel: [ 0.012956] ... max period: 000000007fffffff Apr 28 08:30:03 Bloodstone kernel: [ 0.012967] ... fixed-purpose events: 0 Apr 28 08:30:03 Bloodstone kernel: [ 0.012978] ... event mask: 0000000000000003 Apr 28 08:30:03 Bloodstone kernel: [ 0.012997] Checking 'hlt' instruction... OK. Apr 28 08:30:03 Bloodstone kernel: [ 0.028158] SMP alternatives: switching to UP code Apr 28 08:30:03 Bloodstone kernel: [ 0.041866] Freeing SMP alternatives: 13k freed Apr 28 08:30:03 Bloodstone kernel: [ 0.041932] ACPI: Core revision 20090903 Apr 28 08:30:03 Bloodstone kernel: [ 0.051139] ACPI: setting ELCR to 0200 (from 0e20) Apr 28 08:30:03 Bloodstone kernel: [ 0.052288] weird, boot CPU (#0) not listed by the BIOS. Apr 28 08:30:03 Bloodstone kernel: [ 0.052301] SMP motherboard not detected. Apr 28 08:30:03 Bloodstone kernel: [ 0.052314] Local APIC not detected. Using dummy APIC emulation. Apr 28 08:30:03 Bloodstone kernel: [ 0.052325] SMP disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.056877] Brought up 1 CPUs Apr 28 08:30:03 Bloodstone kernel: [ 0.056894] Total of 1 processors activated (801.84 BogoMIPS). Apr 28 08:30:03 Bloodstone kernel: [ 0.058379] CPU0 attaching NULL sched-domain. Apr 28 08:30:03 Bloodstone kernel: [ 0.059083] devtmpfs: initialized Apr 28 08:30:03 Bloodstone kernel: [ 0.061521] regulator: core version 0.5 Apr 28 08:30:03 Bloodstone kernel: [ 0.061883] NET: Registered protocol family 16 Apr 28 08:30:03 Bloodstone kernel: [ 0.062440] ACPI: bus type pci registered Apr 28 08:30:03 Bloodstone kernel: [ 0.094478] PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1 Apr 28 08:30:03 Bloodstone kernel: [ 0.094492] PCI: Using configuration type 1 for base access Apr 28 08:30:03 Bloodstone kernel: [ 0.096932] bio: create slab <bio-0> at 0 Apr 28 08:30:03 Bloodstone kernel: [ 0.098837] ACPI: EC: Look up EC in DSDT Apr 28 08:30:03 Bloodstone kernel: [ 0.110308] ACPI: Interpreter enabled Apr 28 08:30:03 Bloodstone kernel: [ 0.110350] ACPI: (supports S0 S1 S5) Apr 28 08:30:03 Bloodstone kernel: [ 0.110463] ACPI: Using PIC for interrupt routing Apr 28 08:30:03 Bloodstone kernel: [ 0.124841] ACPI: No dock devices found. Apr 28 08:30:03 Bloodstone kernel: [ 0.125492] ACPI: PCI Root Bridge [PCI0] (0000:00) Apr 28 08:30:03 Bloodstone kernel: [ 0.125696] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xdd000000-0xdd3fffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126022] pci 0000:00:07.1: reg 20 io port: [0xd000-0xd00f] Apr 28 08:30:03 Bloodstone kernel: [ 0.126130] pci 0000:00:07.2: reg 20 io port: [0xd400-0xd41f] Apr 28 08:30:03 Bloodstone kernel: [ 0.126340] pci 0000:00:10.0: reg 10 32bit mmio: [0xdd401000-0xdd4017ff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126366] pci 0000:00:10.0: reg 14 io port: [0xdc00-0xdc7f] Apr 28 08:30:03 Bloodstone kernel: [ 0.126438] pci 0000:00:10.0: supports D2 Apr 28 08:30:03 Bloodstone kernel: [ 0.126453] pci 0000:00:10.0: PME# supported from D2 D3hot D3cold Apr 28 08:30:03 Bloodstone kernel: [ 0.126470] pci 0000:00:10.0: PME# disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.126547] pci 0000:00:12.0: reg 10 io port: [0xe000-0xe0ff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126572] pci 0000:00:12.0: reg 14 32bit mmio: [0xdd400000-0xdd4000ff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126620] pci 0000:00:12.0: reg 30 32bit mmio pref: [0xdc000000-0xdc01ffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126660] pci 0000:00:12.0: supports D1 D2 Apr 28 08:30:03 Bloodstone kernel: [ 0.126675] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold Apr 28 08:30:03 Bloodstone kernel: [ 0.126691] pci 0000:00:12.0: PME# disabled Apr 28 08:30:03 Bloodstone kernel: [ 0.126820] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xd8ffffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126845] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126868] pci 0000:01:00.0: reg 18 32bit mmio: [0xda000000-0xda000fff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126909] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.126958] pci 0000:01:00.0: supports D1 D2 Apr 28 08:30:03 Bloodstone kernel: [ 0.127037] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] Apr 28 08:30:03 Bloodstone kernel: [ 0.127056] pci 0000:00:01.0: bridge 32bit mmio: [0xd8000000-0xdbffffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.127086] pci_bus 0000:00: on NUMA node 0 Apr 28 08:30:03 Bloodstone kernel: [ 0.127121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Apr 28 08:30:03 Bloodstone kernel: [ 0.133216] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Apr 28 08:30:03 Bloodstone kernel: [ 0.134249] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. Apr 28 08:30:03 Bloodstone kernel: [ 0.135347] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) Apr 28 08:30:03 Bloodstone kernel: [ 0.136575] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Apr 28 08:30:03 Bloodstone kernel: [ 0.137467] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Apr 28 08:30:03 Bloodstone kernel: [ 0.137486] vgaarb: loaded Apr 28 08:30:03 Bloodstone kernel: [ 0.137917] PCI: Using ACPI for IRQ routing Apr 28 08:30:03 Bloodstone kernel: [ 0.138475] Switching to clocksource tsc Apr 28 08:30:03 Bloodstone kernel: [ 0.143064] pnp: PnP ACPI init Apr 28 08:30:03 Bloodstone kernel: [ 0.143142] ACPI: bus type pnp registered Apr 28 08:30:03 Bloodstone kernel: [ 0.155675] pnp: PnP ACPI: found 13 devices Apr 28 08:30:03 Bloodstone kernel: [ 0.155689] ACPI: ACPI bus type pnp unregistered Apr 28 08:30:03 Bloodstone kernel: [ 0.155709] PnPBIOS: Disabled by ACPI PNP Apr 28 08:30:03 Bloodstone kernel: [ 0.155772] system 00:00: iomem range 0xd0000-0xd1fff has been reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155793] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155813] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155833] system 00:00: iomem range 0xfc000-0xfffff could not be reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155853] system 00:00: iomem range 0xfff0000-0xfffffff could not be reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155873] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155892] system 00:00: iomem range 0x0-0x9ffff could not be reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155911] system 00:00: iomem range 0x100000-0xffeffff could not be reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155955] system 00:02: ioport range 0x3f0-0x3f1 has been reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.155975] system 00:02: ioport range 0x4d0-0x4d1 has been reserved Apr 28 08:30:03 Bloodstone kernel: [ 0.192018] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 Apr 28 08:30:03 Bloodstone kernel: [ 0.192038] pci 0000:00:01.0: IO window: 0xc000-0xcfff Apr 28 08:30:03 Bloodstone kernel: [ 0.192059] pci 0000:00:01.0: MEM window: 0xd8000000-0xdbffffff Apr 28 08:30:03 Bloodstone kernel: [ 0.192078] pci 0000:00:01.0: PREFETCH window: 0x10000000-0x100fffff Apr 28 08:30:03 Bloodstone kernel: [ 0.192119] pci 0000:00:01.0: setting latency timer to 64 Apr 28 08:30:03 Bloodstone kernel: [ 0.192143] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.192160] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.192178] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] Apr 28 08:30:03 Bloodstone kernel: [ 0.192194] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xdbffffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.192211] pci_bus 0000:01: resource 2 pref mem [0x10000000-0x100fffff] Apr 28 08:30:03 Bloodstone kernel: [ 0.192399] NET: Registered protocol family 2 Apr 28 08:30:03 Bloodstone kernel: [ 0.192950] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 0.194846] TCP established hash table entries: 8192 (order: 4, 65536 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 0.195220] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 0.195585] TCP: Hash tables configured (established 8192 bind 8192) Apr 28 08:30:03 Bloodstone kernel: [ 0.195599] TCP reno registered Apr 28 08:30:03 Bloodstone kernel: [ 0.196026] NET: Registered protocol family 1 Apr 28 08:30:03 Bloodstone kernel: [ 0.196125] pci 0000:00:01.0: disabling DAC on VIA PCI bridge Apr 28 08:30:03 Bloodstone kernel: [ 0.196151] pci 0000:00:07.0: Activating ISA DMA hang workarounds Apr 28 08:30:03 Bloodstone kernel: [ 0.196220] pci 0000:01:00.0: Boot video device Apr 28 08:30:03 Bloodstone kernel: [ 0.196476] Unpacking initramfs... Apr 28 08:30:03 Bloodstone kernel: [ 3.448686] Freeing initrd memory: 18898k freed Apr 28 08:30:03 Bloodstone kernel: [ 3.549866] audit: initializing netlink socket (disabled) Apr 28 08:30:03 Bloodstone kernel: [ 3.549940] type=2000 audit(1272439788.548:1): initialized Apr 28 08:30:03 Bloodstone kernel: [ 3.550715] HugeTLB registered 4 MB page size, pre-allocated 0 pages Apr 28 08:30:03 Bloodstone kernel: [ 3.561517] VFS: Disk quotas dquot_6.5.2 Apr 28 08:30:03 Bloodstone kernel: [ 3.561926] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Apr 28 08:30:03 Bloodstone kernel: [ 3.562510] msgmni has been set to 497 Apr 28 08:30:03 Bloodstone kernel: [ 3.563831] alg: No test for stdrng (krng) Apr 28 08:30:03 Bloodstone kernel: [ 3.564101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Apr 28 08:30:03 Bloodstone kernel: [ 3.564121] io scheduler noop registered Apr 28 08:30:03 Bloodstone kernel: [ 3.564133] io scheduler anticipatory registered Apr 28 08:30:03 Bloodstone kernel: [ 3.564144] io scheduler deadline registered Apr 28 08:30:03 Bloodstone kernel: [ 3.564450] io scheduler cfq registered (default) Apr 28 08:30:03 Bloodstone kernel: [ 3.565368] isapnp: Scanning for PnP cards... Apr 28 08:30:03 Bloodstone kernel: [ 3.920064] isapnp: No Plug & Play device found Apr 28 08:30:03 Bloodstone kernel: [ 3.931165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Apr 28 08:30:03 Bloodstone kernel: [ 3.931438] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 28 08:30:03 Bloodstone kernel: [ 3.931776] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Apr 28 08:30:03 Bloodstone kernel: [ 3.933276] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 28 08:30:03 Bloodstone kernel: [ 3.933804] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Apr 28 08:30:03 Bloodstone kernel: [ 3.934740] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Apr 28 08:30:03 Bloodstone kernel: [ 3.938031] serio: i8042 KBD port at 0x60,0x64 irq 1 Apr 28 08:30:03 Bloodstone kernel: [ 3.938072] serio: i8042 AUX port at 0x60,0x64 irq 12 Apr 28 08:30:03 Bloodstone kernel: [ 3.938777] mice: PS/2 mouse device common for all mice Apr 28 08:30:03 Bloodstone kernel: [ 3.938924] Driver 'rtc_cmos' needs updating - please use bus_type methods Apr 28 08:30:03 Bloodstone kernel: [ 3.939083] rtc_cmos 00:04: RTC can wake from S4 Apr 28 08:30:03 Bloodstone kernel: [ 3.939333] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 Apr 28 08:30:03 Bloodstone kernel: [ 3.939397] rtc0: alarms up to one year, y3k, 242 bytes nvram Apr 28 08:30:03 Bloodstone kernel: [ 3.939479] cpuidle: using governor ladder Apr 28 08:30:03 Bloodstone kernel: [ 3.939494] cpuidle: using governor menu Apr 28 08:30:03 Bloodstone kernel: [ 3.939522] No iBFT detected. Apr 28 08:30:03 Bloodstone kernel: [ 3.942108] TCP cubic registered Apr 28 08:30:03 Bloodstone kernel: [ 3.943242] NET: Registered protocol family 10 Apr 28 08:30:03 Bloodstone kernel: [ 3.946580] lo: Disabled Privacy Extensions Apr 28 08:30:03 Bloodstone kernel: [ 3.948834] Mobile IPv6 Apr 28 08:30:03 Bloodstone kernel: [ 3.948854] NET: Registered protocol family 17 Apr 28 08:30:03 Bloodstone kernel: [ 3.948936] Using IPI No-Shortcut mode Apr 28 08:30:03 Bloodstone kernel: [ 3.949547] registered taskstats version 1 Apr 28 08:30:03 Bloodstone kernel: [ 3.950176] rtc_cmos 00:04: setting system clock to 2010-04-28 07:29:49 UTC (1272439789) Apr 28 08:30:03 Bloodstone kernel: [ 3.950458] Freeing unused kernel memory: 368k freed Apr 28 08:30:03 Bloodstone kernel: [ 3.952569] Write protecting the kernel text: 2416k Apr 28 08:30:03 Bloodstone kernel: [ 3.952686] Write protecting the kernel read-only data: 872k Apr 28 08:30:03 Bloodstone kernel: [ 3.962002] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Apr 28 08:30:03 Bloodstone kernel: [ 4.675258] fan PNP0C0B:00: registered as cooling_device0 Apr 28 08:30:03 Bloodstone kernel: [ 4.675296] ACPI: Fan [FAN] (on) Apr 28 08:30:03 Bloodstone kernel: [ 4.707808] thermal LNXTHERM:01: registered as thermal_zone0 Apr 28 08:30:03 Bloodstone kernel: [ 4.707857] ACPI: Thermal Zone [THRM] (0 C) Apr 28 08:30:03 Bloodstone kernel: [ 5.487728] Uniform Multi-Platform E-IDE driver Apr 28 08:30:03 Bloodstone kernel: [ 5.556863] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 Apr 28 08:30:03 Bloodstone kernel: [ 5.556917] ACPI: Power Button [PWRB] Apr 28 08:30:03 Bloodstone kernel: [ 5.557587] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 Apr 28 08:30:03 Bloodstone kernel: [ 5.557617] ACPI: Power Button [PWRF] Apr 28 08:30:03 Bloodstone kernel: [ 5.564656] Linux agpgart interface v0.103 Apr 28 08:30:03 Bloodstone kernel: [ 5.573442] input: PC Speaker as /devices/platform/pcspkr/input/input3 Apr 28 08:30:03 Bloodstone kernel: [ 5.615716] Floppy drive(s): fd0 is 1.44M Apr 28 08:30:03 Bloodstone kernel: [ 5.636298] via82cxxx 0000:00:07.1: VIA vt82c596b (rev 12) IDE UDMA66 Apr 28 08:30:03 Bloodstone kernel: [ 5.636327] via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06) Apr 28 08:30:03 Bloodstone kernel: [ 5.636453] via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later Apr 28 08:30:03 Bloodstone kernel: [ 5.636482] ide0: BM-DMA at 0xd000-0xd007 Apr 28 08:30:03 Bloodstone kernel: [ 5.636524] ide1: BM-DMA at 0xd008-0xd00f Apr 28 08:30:03 Bloodstone kernel: [ 5.636554] Probing IDE interface ide0... Apr 28 08:30:03 Bloodstone kernel: [ 5.646863] FDC 0 is a post-1991 82077 Apr 28 08:30:03 Bloodstone kernel: [ 5.873248] usbcore: registered new interface driver usbfs Apr 28 08:30:03 Bloodstone kernel: [ 5.874022] usbcore: registered new interface driver hub Apr 28 08:30:03 Bloodstone kernel: [ 5.874914] usbcore: registered new device driver usb Apr 28 08:30:03 Bloodstone kernel: [ 5.963144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Apr 28 08:30:03 Bloodstone kernel: [ 5.985414] uhci_hcd: USB Universal Host Controller Interface driver Apr 28 08:30:03 Bloodstone kernel: [ 6.016177] hda: Maxtor 6Y200P0, ATA DISK drive Apr 28 08:30:03 Bloodstone kernel: [ 6.688282] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 Apr 28 08:30:03 Bloodstone kernel: [ 6.688467] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 Apr 28 08:30:03 Bloodstone kernel: [ 6.688484] hda: UDMA/33 mode selected Apr 28 08:30:03 Bloodstone kernel: [ 6.688628] Probing IDE interface ide1... Apr 28 08:30:03 Bloodstone kernel: [ 7.424265] hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive Apr 28 08:30:03 Bloodstone kernel: [ 8.264084] hdd: COMPAQ DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive Apr 28 08:30:03 Bloodstone kernel: [ 8.264312] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO0 Apr 28 08:30:03 Bloodstone kernel: [ 8.264605] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO0 Apr 28 08:30:03 Bloodstone kernel: [ 8.264900] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 Apr 28 08:30:03 Bloodstone kernel: [ 8.273763] hdd: MWDMA2 mode selected Apr 28 08:30:03 Bloodstone kernel: [ 8.282900] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Apr 28 08:30:03 Bloodstone kernel: [ 8.283036] ide1 at 0x170-0x177,0x376 on irq 15 Apr 28 08:30:03 Bloodstone kernel: [ 8.284473] agpgart: Detected VIA Apollo Pro 133 chipset Apr 28 08:30:03 Bloodstone kernel: [ 8.288382] agpgart-via 0000:00:00.0: AGP aperture is 4M @ 0xdd000000 Apr 28 08:30:03 Bloodstone kernel: [ 8.288496] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Apr 28 08:30:03 Bloodstone kernel: [ 8.290173] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 Apr 28 08:30:03 Bloodstone kernel: [ 8.290191] PCI: setting IRQ 5 as level-triggered Apr 28 08:30:03 Bloodstone kernel: [ 8.290214] r8169 0000:00:12.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 Apr 28 08:30:03 Bloodstone kernel: [ 8.290283] r8169 0000:00:12.0: no PCI Express capability Apr 28 08:30:03 Bloodstone kernel: [ 8.294760] eth0: RTL8110s at 0xd080e000, 00:40:f4:a9:d0:7d, XID 04000000 IRQ 5 Apr 28 08:30:03 Bloodstone kernel: [ 8.309646] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Apr 28 08:30:03 Bloodstone kernel: [ 8.309665] PCI: setting IRQ 11 as level-triggered Apr 28 08:30:03 Bloodstone kernel: [ 8.309690] firewire_ohci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 Apr 28 08:30:03 Bloodstone kernel: [ 8.388169] firewire_ohci: Added fw-ohci device 0000:00:10.0, OHCI version 1.0 Apr 28 08:30:03 Bloodstone kernel: [ 8.390685] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 Apr 28 08:30:03 Bloodstone kernel: [ 8.390702] PCI: setting IRQ 10 as level-triggered Apr 28 08:30:03 Bloodstone kernel: [ 8.390725] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 Apr 28 08:30:03 Bloodstone kernel: [ 8.390764] uhci_hcd 0000:00:07.2: UHCI Host Controller Apr 28 08:30:03 Bloodstone kernel: [ 8.390911] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 Apr 28 08:30:03 Bloodstone kernel: [ 8.390991] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400 Apr 28 08:30:03 Bloodstone kernel: [ 8.391245] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 Apr 28 08:30:03 Bloodstone kernel: [ 8.391264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Apr 28 08:30:03 Bloodstone kernel: [ 8.391280] usb usb1: Product: UHCI Host Controller Apr 28 08:30:03 Bloodstone kernel: [ 8.391294] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd Apr 28 08:30:03 Bloodstone kernel: [ 8.391308] usb usb1: SerialNumber: 0000:00:07.2 Apr 28 08:30:03 Bloodstone kernel: [ 8.391805] usb usb1: configuration #1 chosen from 1 choice Apr 28 08:30:03 Bloodstone kernel: [ 8.393596] hub 1-0:1.0: USB hub found Apr 28 08:30:03 Bloodstone kernel: [ 8.393660] hub 1-0:1.0: 2 ports detected Apr 28 08:30:03 Bloodstone kernel: [ 8.585824] SCSI subsystem initialized Apr 28 08:30:03 Bloodstone kernel: [ 8.816729] libata version 3.00 loaded. Apr 28 08:30:03 Bloodstone kernel: [ 8.899103] firewire_core: created device fw0: GUID 00110600000069b8, S400 Apr 28 08:30:03 Bloodstone kernel: [ 8.918633] ide-gd driver 1.18 Apr 28 08:30:03 Bloodstone kernel: [ 8.918807] hda: max request size: 512KiB Apr 28 08:30:03 Bloodstone kernel: [ 8.970374] ide-cd driver 5.00 Apr 28 08:30:03 Bloodstone kernel: [ 8.972339] hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63 Apr 28 08:30:03 Bloodstone kernel: [ 8.972568] hda: cache flushes supported Apr 28 08:30:03 Bloodstone kernel: [ 8.972827] hda: hda1 hda2 < hda5 > Apr 28 08:30:03 Bloodstone kernel: [ 9.156824] ide-gd: hdc: No disk in drive Apr 28 08:30:03 Bloodstone kernel: [ 9.205401] ide-gd: hdc: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm Apr 28 08:30:03 Bloodstone kernel: [ 9.216545] ide-cd: hdd: ATAPI 24X DVD-ROM drive, 512kB Cache Apr 28 08:30:03 Bloodstone kernel: [ 9.216576] Uniform CD-ROM driver Revision: 3.20 Apr 28 08:30:03 Bloodstone kernel: [ 9.494434] PM: Starting manual resume from disk Apr 28 08:30:03 Bloodstone kernel: [ 9.696155] kjournald starting. Commit interval 5 seconds Apr 28 08:30:03 Bloodstone kernel: [ 9.696215] EXT3-fs: mounted filesystem with ordered data mode. Apr 28 08:30:03 Bloodstone kernel: [ 11.404621] udev: starting version 151 Apr 28 08:30:03 Bloodstone kernel: [ 12.621919] Marking TSC unstable due to TSC halts in idle Apr 28 08:30:03 Bloodstone kernel: [ 12.626023] processor LNXCPU:00: registered as cooling_device1 Apr 28 08:30:03 Bloodstone kernel: [ 12.626933] Switching to clocksource acpi_pm Apr 28 08:30:03 Bloodstone kernel: [ 12.719063] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Apr 28 08:30:03 Bloodstone kernel: [ 12.991125] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Apr 28 08:30:03 Bloodstone kernel: [ 12.992945] ide-gd: hdc: No disk in drive Apr 28 08:30:03 Bloodstone kernel: [ 13.025837] ACPI: I/O resource vt596_smbus [0x5000-0x5007] conflicts with ACPI region SM06 [0x5006-0x5006] Apr 28 08:30:03 Bloodstone kernel: [ 13.025918] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Apr 28 08:30:03 Bloodstone kernel: [ 13.067489] parport_pc 00:0a: reported by Plug and Play ACPI Apr 28 08:30:03 Bloodstone kernel: [ 13.067645] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] Apr 28 08:30:03 Bloodstone kernel: [ 13.815211] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 Apr 28 08:30:03 Bloodstone kernel: [ 15.017343] Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k Apr 28 08:30:03 Bloodstone kernel: [ 15.260349] EXT3 FS on hda1, internal journal Apr 28 08:30:03 Bloodstone kernel: [ 15.569294] loop: module loaded Apr 28 08:30:03 Bloodstone kernel: [ 17.469180] r8169: eth0: link up ntpd: acpi_pm was selected then. Here are the corresponding log lines: Apr 28 08:31:28 Bloodstone ntpd[881]: adjusting local clock by 0.616501s Apr 28 08:35:06 Bloodstone ntpd[881]: adjusting local clock by 0.577179s Apr 28 08:38:28 Bloodstone ntpd[881]: adjusting local clock by 0.496728s Apr 28 08:42:53 Bloodstone ntpd[881]: adjusting local clock by 0.388266s Apr 28 08:46:25 Bloodstone ntpd[881]: adjusting local clock by 0.285678s Apr 28 08:50:08 Bloodstone ntpd[881]: adjusting local clock by 0.224315s Apr 28 08:56:55 Bloodstone ntpd[881]: adjusting local clock by 0.129418s Apr 28 09:02:23 Bloodstone ntpd[881]: Terminating Apr 28 09:04:48 Bloodstone ntpd[852]: adjusting local clock by -0.194381s Apr 28 09:14:13 Bloodstone ntpd[852]: Terminating Apr 28 09:14:59 Bloodstone ntpd[960]: dispatch_imsg in main: pipe closed Apr 28 09:14:59 Bloodstone ntpd[960]: Terminating Apr 28 09:15:23 Bloodstone ntpd[968]: dispatch_imsg in main: pipe closed Apr 28 09:15:23 Bloodstone ntpd[968]: Terminating Apr 28 09:23:25 Bloodstone ntpd[1001]: adjusting local clock by 0.183924s Apr 28 10:48:31 Bloodstone ntpd[1001]: adjusting local clock by 0.157996s Apr 28 12:24:38 Bloodstone ntpd[1001]: adjusting local clock by 0.174573s Apr 28 15:33:48 Bloodstone ntpd[1001]: adjusting local clock by 0.149946s Apr 28 18:49:45 Bloodstone ntpd[1001]: adjusting local clock by 0.167078s Apr 29 01:07:58 Bloodstone ntpd[1001]: adjusting local clock by 0.176657s Apr 29 05:08:50 Bloodstone ntpd[1001]: adjusting local clock by 0.156490s (So basically, refining adjustment to perfection.) Here's what acpi_pm (clocksource=acpi_pm) looks like now with 2.6.39 RC6. Not nearly as good. :-( May 15 13:12:04 Bloodstone ntpd[926]: adjusting local clock by 0.174426s May 15 13:12:04 Bloodstone ntpd[926]: skew change 60.526 exceeds limit May 15 13:21:51 Bloodstone ntpd[926]: skew change 18.553 exceeds limit May 15 14:41:19 Bloodstone ntpd[926]: skew change 6.137 exceeds limit May 15 15:10:36 Bloodstone ntpd[903]: adjusting local clock by -1.270013s May 15 15:18:33 Bloodstone ntpd[903]: adjusting local clock by -1.182338s May 15 15:22:48 Bloodstone ntpd[903]: adjusting local clock by -1.078590s May 15 15:27:29 Bloodstone ntpd[903]: adjusting local clock by -0.745117s May 15 15:31:57 Bloodstone ntpd[903]: adjusting local clock by -0.576340s May 15 15:36:12 Bloodstone ntpd[903]: adjusting local clock by -5.114443s May 15 15:40:30 Bloodstone ntpd[903]: adjusting local clock by -5.017800s May 15 15:44:40 Bloodstone ntpd[903]: adjusting local clock by -4.894922s May 15 15:50:20 Bloodstone ntpd[903]: adjusting local clock by -4.740165s May 15 15:55:11 Bloodstone ntpd[903]: adjusting local clock by -4.521784s May 15 15:59:29 Bloodstone ntpd[903]: adjusting local clock by -4.379620s May 15 16:03:48 Bloodstone ntpd[903]: adjusting local clock by -4.273313s May 15 16:08:08 Bloodstone ntpd[903]: adjusting local clock by -4.134552s May 15 16:12:25 Bloodstone ntpd[903]: adjusting local clock by -3.952432s May 15 16:16:38 Bloodstone ntpd[903]: adjusting local clock by -3.817268s May 15 16:20:59 Bloodstone ntpd[903]: adjusting local clock by -3.623079s May 15 16:25:20 Bloodstone ntpd[903]: adjusting local clock by -3.492560s May 15 16:29:38 Bloodstone ntpd[903]: adjusting local clock by -3.346056s (The convergence never happens; it starts exceeding the limit again just as it settles to +/-0.13s or so.) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/984f4829-e82f-44ac-b960-966f09ef3...@users.sourceforge.net
