Package: linux-2.6
Version: 2.6.39-1+b1
Severity: normal
Tags: sid

Steps to reproduce:
1. From the Gnome 2 'System' menu, select "Shut Down..." and click on 
"Hibernate" in the dialog
that appears
2. Watch system as data is written out to disk
3. System powers itself off
4. Press power button to turn on
5. Wait for grub to boot the same kernel

Expected results
1. Kernel loads memory image from disk
2. Session reappears as it was when hibernated

Actual results
1. Kernel loads the memory image apparently up to 100%
2. System reboots
3. No resume image is found
4. Filesystem journals are recovered before mount

I can reproduce this 100% of attempts. This issue does not occur on 2.6.38-[12].

Based on seeing other bug reports (e.g. #624169) that mention kernel panics on 
resume, I tried
adding the boot command panic=120 to capture a picture of any stack trace 
before the reboot.
This produced no change in behavior - the system still reboot with no apparent 
delay.

My experience matches that described in the initial report of bug #623426, 
though the versions
involved differ.

-- Package-specific info:
** Version:
Linux version 2.6.39-1-amd64 (Debian 2.6.39-1) 
(buildd_amd64-bra...@buildd.debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) 
#1 SMP Tue May 24 14:34:19 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-1-amd64 
root=UUID=3e436e2a-5d44-49aa-a1f1-d6d8e67b1b08 ro quiet

** Tainted: PO (4097)
 * Proprietary module has been loaded.
 * Out-of-tree module has been loaded.

** Kernel log:
[    3.499599] input: Microsoft Microsoft IntelliMouse® Explorer as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input1
[    3.499646] generic-usb 0003:045E:001E.0001: input,hidraw0: USB HID v1.00 
Mouse [Microsoft Microsoft IntelliMouse® Explorer] on 
usb-0000:00:1d.0-1.5/input0
[    3.499658] usbcore: registered new interface driver usbhid
[    3.499659] usbhid: USB HID core driver
[    3.501033] sr0: scsi3-mmc drive: 12x/48x cd/rw xa/form2 cdda tray
[    3.501038] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.501151] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.553031]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    3.553299] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.556127] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.556153] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.178696] PM: Starting manual resume from disk
[    4.178698] PM: Hibernation image partition 8:6 present
[    4.178699] PM: Looking for hibernation image.
[    4.190650] PM: Image not found (code -22)
[    4.190653] PM: Hibernation image not present or could not be loaded.
[    4.192718] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[    4.192721] PM: Marking nosave pages: 00000000bd780000 - 0000000100000000
[    4.193883] PM: Basic memory bitmaps created
[    4.214306] PM: Basic memory bitmaps freed
[    4.224952] EXT3-fs (sda5): recovery required on readonly filesystem
[    4.224957] EXT3-fs (sda5): write access will be enabled during recovery
[    4.261613] EXT3-fs: barriers not enabled
[    4.340223] kjournald starting.  Commit interval 5 seconds
[    4.340248] EXT3-fs (sda5): recovery complete
[    4.340562] EXT3-fs (sda5): mounted filesystem with ordered data mode
[    5.724215] udevd[292]: starting version 170
[    6.546184] input: Power Button as 
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    6.546189] ACPI: Power Button [PWRB]
[    6.546225] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.546228] ACPI: Power Button [PWRF]
[    6.723799] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    6.854560] ACPI: acpi_idle registered with cpuidle
[    6.856309] Monitor-Mwait will be used to enter C-1 state
[    6.856324] Monitor-Mwait will be used to enter C-2 state
[    6.856337] Monitor-Mwait will be used to enter C-3 state
[    6.940797] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 
18
[    7.012434] dcdbas dcdbas: Dell Systems Management Base Driver (version 
5.6.0-3.2)
[    7.807607] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 
22
[    7.807649] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    7.807669] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.915623] hda_codec: ALC662 rev1: BIOS auto-probing.
[    7.920393] input: HDA Intel Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    8.210086] Disabling lock debugging due to kernel taint
[    8.210091] nvidia: module license 'NVIDIA' taints kernel.
[    8.666927] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.666939] nvidia 0000:01:00.0: setting latency timer to 64
[    8.666946] vgaarb: device changed decodes: 
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.667105] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  270.41.06  Mon 
Apr 18 14:53:56 PDT 2011
[   10.598639] Adding 15623176k swap on /dev/sda6.  Priority:-1 extents:1 
across:15623176k 
[   10.724100] EXT3-fs (sda5): using internal journal
[   10.897110] loop: module loaded
[   26.777098] EXT3-fs: barriers not enabled
[   26.790888] kjournald starting.  Commit interval 5 seconds
[   26.791388] EXT3-fs (sda7): using internal journal
[   26.791395] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   27.173114] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
[   27.191269] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.482493] tg3 0000:02:00.0: eth0: Link is down
[   30.477201] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
[   30.477204] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[   30.477459] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   36.616508] RPC: Registered udp transport module.
[   36.616510] RPC: Registered tcp transport module.
[   36.616511] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   36.689830] FS-Cache: Loaded
[   36.736400] FS-Cache: Netfs 'nfs' registered for caching
[   36.762568] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   37.057501] fuse init (API version 7.16)
[   37.392115] vboxdrv: Found 8 processor cores.
[   37.393569] vboxdrv: fAsync=0 offMin=0x207 offMax=0x2fcaa
[   37.393606] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 
'normal'.
[   37.393608] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 
0x00160000).
[   37.434559] vboxnet0: Features changed: 0x00004800 -> 0x00004000
[   40.347110] Bluetooth: Core ver 2.16
[   40.347124] NET: Registered protocol family 31
[   40.347125] Bluetooth: HCI device and connection manager initialized
[   40.347128] Bluetooth: HCI socket layer initialized
[   40.347129] Bluetooth: L2CAP socket layer initialized
[   40.347250] Bluetooth: SCO socket layer initialized
[   40.550138] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.550140] Bluetooth: BNEP filters: protocol multicast
[   40.553731] Bluetooth: RFCOMM TTY layer initialized
[   40.553739] Bluetooth: RFCOMM socket layer initialized
[   40.553743] Bluetooth: RFCOMM ver 1.11
[   41.381463] eth0: no IPv6 routers present
[   42.132892] lp: driver loaded but no devices found
[   42.259051] ppdev: user-space parallel port driver
[   43.385146] ioremap error for 0xbd780000-0xbd781000, requested 0x10, got 0x0
[   67.975471] CE: hpet2 increased min_delta_ns to 7500 nsec
[   67.975479] CE: hpet2 increased min_delta_ns to 11250 nsec
[   67.975484] hrtimer: interrupt took 3080 ns
[  162.951965] CE: hpet4 increased min_delta_ns to 7500 nsec
[  162.951973] CE: hpet4 increased min_delta_ns to 11250 nsec
[  205.541810] CE: hpet3 increased min_delta_ns to 7500 nsec
[  205.541872] CE: hpet3 increased min_delta_ns to 11250 nsec
[  243.787802] CE: hpet6 increased min_delta_ns to 7500 nsec
[  243.787831] CE: hpet6 increased min_delta_ns to 11250 nsec
[  258.725936] CE: hpet5 increased min_delta_ns to 7500 nsec
[  258.725945] CE: hpet5 increased min_delta_ns to 11250 nsec

** Model information
sys_vendor: Dell Inc.
product_name: Precision T1500
product_version: 00
chassis_vendor: Dell Inc.
chassis_version:  
bios_vendor: Dell Inc.
bios_version: 2.0.3
board_vendor: Dell Inc.
board_name: 0XC7MM
board_version: A01

** Loaded modules:
Module                  Size  Used by
acpi_cpufreq           12849  1 
mperf                  12411  1 acpi_cpufreq
cpufreq_powersave      12454  0 
cpufreq_userspace      12576  0 
cpufreq_stats          12713  0 
cpufreq_conservative    13147  0 
parport_pc             22191  0 
ppdev                  12725  0 
lp                     17190  0 
parport                31650  3 parport_pc,ppdev,lp
rfcomm                 32744  0 
bnep                   17424  2 
bluetooth             107224  10 rfcomm,bnep
rfkill                 19014  3 bluetooth
crc16                  12343  1 bluetooth
vboxnetadp             13143  0 
binfmt_misc            12914  1 
vboxnetflt             24179  0 
vboxdrv               171737  2 vboxnetadp,vboxnetflt
fuse                   61554  1 
nfsd                  258506  2 
nfs                   251154  0 
lockd                  70844  2 nfsd,nfs
fscache                36071  1 nfs
auth_rpcgss            36788  2 nfsd,nfs
nfs_acl                12511  2 nfsd,nfs
sunrpc                162130  6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
loop                   22479  0 
nvidia              10482591  30 
snd_hda_codec_realtek   283734  1 
snd_hda_intel          25946  1 
snd_hda_codec          67865  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13148  1 snd_hda_codec
snd_pcm_oss            40662  0 
snd_mixer_oss          17905  1 snd_pcm_oss
snd_pcm                67276  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi           12848  0 
snd_rawmidi            22963  1 snd_seq_midi
snd_seq_midi_event     13316  1 snd_seq_midi
snd_seq                44678  2 snd_seq_midi,snd_seq_midi_event
snd_timer              22658  2 snd_pcm,snd_seq
snd_seq_device         13155  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    52324  13 
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
dcdbas                 13256  0 
i2c_i801               16870  0 
i2c_core               23766  2 nvidia,i2c_i801
soundcore              13014  1 snd
processor              27431  9 acpi_cpufreq
snd_page_alloc         12969  2 snd_hda_intel,snd_pcm
evdev                  17475  7 
pcspkr                 12579  0 
thermal_sys            17939  1 processor
button                 12895  0 
ext3                  112254  2 
jbd                    41698  1 ext3
mbcache                12930  1 ext3
sg                     25769  0 
sr_mod                 21824  0 
sd_mod                 35644  4 
cdrom                  35134  1 sr_mod
usbhid                 39946  0 
crc_t10dif             12348  1 sd_mod
hid                    72745  1 usbhid
ahci                   25089  3 
ehci_hcd               39487  0 
libahci                22616  1 ahci
tg3                   109263  0 
libata                151572  2 ahci,libahci
broadcom               13040  0 
libphy                 18759  2 tg3,broadcom
scsi_mod              161557  4 sg,sr_mod,sd_mod,libata
usbcore               127203  3 usbhid,ehci_hcd

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] 
(rev 11)
        Subsystem: Dell Device [1028:0427]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root 
Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: f8000000-fbefffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Core Processor System 
Management Registers [8086:d155] (rev 11)
        Subsystem: Device [0028:0027]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore 
and Scratchpad Registers [8086:d156] (rev 11)
        Subsystem: Device [0028:0027]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:08.2 System peripheral [0880]: Intel Corporation Core Processor System 
Control and Status Registers [8086:d157] (rev 11)
        Subsystem: Device [0028:0027]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:08.3 System peripheral [0880]: Intel Corporation Core Processor 
Miscellaneous Registers [8086:d158] (rev 11)
        Subsystem: Device [0028:0027]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link 
[8086:d150] (rev 11)
        Subsystem: Device [0028:0027]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing 
and Protocol Registers [8086:d151] (rev 11)
        Subsystem: Device [0028:0027]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series 
Chipset HECI Controller [8086:3b64] (rev 06)
        Subsystem: Dell Device [1028:0427]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f7fffc00 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:0427]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset 
High Definition Audio [8086:3b56] (rev 06)
        Subsystem: Dell Device [1028:0427]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: fbf00000-fbffffff
        Prefetchable memory behind bridge: 00000000be000000-00000000be1fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:0427]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f7a00000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
a6) (prog-if 01 [Subtractive decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface 
Controller [8086:3b08] (rev 06)
        Subsystem: Dell Device [1028:0427]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 
6 port SATA AHCI Controller [8086:3b22] (rev 06) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device [1028:0427]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 45
        Region 0: I/O ports at dc00 [size=8]
        Region 1: I/O ports at d880 [size=4]
        Region 2: I/O ports at d800 [size=8]
        Region 3: I/O ports at d480 [size=4]
        Region 4: I/O ports at d400 [size=32]
        Region 5: Memory at f7800000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus 
Controller [8086:3b30] (rev 06)
        Subsystem: Dell Device [1028:0427]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f7fff800 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 0400 [size=32]
        Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [Quadro FX 
580] [10de:0659] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: nVidia Corporation Device [10de:063a]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
        Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
        Region 5: I/O ports at ec00 [size=128]
        [virtual] Expansion ROM at fbe80000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia

02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 
Gigabit Ethernet PCIe [14e4:1692] (rev 01)
        Subsystem: Dell Device [1028:0427]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: tg3


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 045e:001e Microsoft Corp. IntelliMouse Explorer


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.39     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-1-amd64 recommends:
ii  firmware-linux-free           3          Binary firmware for various driver

Versions of packages linux-image-2.6.39-1-amd64 suggests:
ii  grub-pc                       1.99-4     GRand Unified Bootloader, version 
ii  linux-doc-2.6.39              2.6.39-1   Linux kernel specific documentatio

Versions of packages linux-image-2.6.39-1-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
* linux-image-2.6.39-1-amd64/postinst/missing-firmware-2.6.39-1-amd64:
  linux-image-2.6.39-1-amd64/prerm/removing-running-kernel-2.6.39-1-amd64: true
  linux-image-2.6.39-1-amd64/postinst/ignoring-ramdisk:
  linux-image-2.6.39-1-amd64/postinst/depmod-error-initrd-2.6.39-1-amd64: false



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110525193429.2542.82677.reportbug@itu

Reply via email to